Lenovo B70 80 Laptop User Guide
Here you can view all the pages of manual Lenovo B70 80 Laptop User Guide. The Lenovo manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 31
Chapter 4. Troubleshooting 27 Other problems Your computer does not respond.To turn off your computer, press and hold the power button for 4 seconds or more. If the computer still does not respond, remove the battery pack and the AC power adapter. Your computer might lock when it enters sleep mode during a communication operation. Disable the sleep timer when you are working on the network. I need to start the computer from a connected device, but the device does not appear on the boot device...
Page 32
28 Appendix. CRU instructions Replacing the battery - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - To replace the battery, do the following: 1Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2Close the computer display, and turn the computer over. 3Unlock the manual battery latch . Slide the spring-loaded latch to the unlocked position to eject the battery...
Page 33
Appendix. CRU instructions 29 Replacing the hard disk drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - You can increase the storage capacity of your computer by replacing the hard disk drive with one of greater capacity. You can purchase a new hard disk drive from your reseller or Lenovo marketing representative. The hard disk drive is very sensitive. Incorrect handling may cause damage and permanent loss of data on it. Before removing the hard disk...
Page 34
30 Appendix. CRU instructions To replace the hard disk drive, do the following: 1Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2Close the computer display, and turn the computer over. 3Remove the battery pack. For details, see “Replacing the battery” on page 28. 4Remove the Hard disk drive/Memory/Central processing unit/Mini PCI Express Card slot compartment cover. a. Loosen the screws that secure the compartment cover . b. Remove the compartment cover . a...
Page 35
Appendix. CRU instructions 31 5Remove the frame fixing screws . 6Pull the tab in the direction shown by arrow . c c c c c d d
Page 36
32 Appendix. CRU instructions 7Take out the hard disk drive secured in a metal frame . 8Remove the screws and detach the metal frame from the hard disk drive. 9Attach the metal frame to a new hard disk drive and tighten the screws. 0Put the hard disk drive gently into the hard disk drive bay with the tab facing upwards and the connectors facing each other, then push it firmly into space. AReinstall the frame fixing screw. BReinstall the compartment cover and tighten the screws. CReinstall the battery...
Page 37
Appendix. CRU instructions 33 Replacing memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - You can increase the amount of memory in your computer by installing a double-data-rate three low voltage synchronous dynamic random access memory (DDR3L SDRAM)-available as an option in the memory slot of your computer. DDR3L SDRAMs are available in various capacities. To replace a DDR3L SDRAM, do the...
Page 38
34 Appendix. CRU instructions 6If two DDR3L SDRAMs are already installed in the memory slot, remove one of them to make room for the new one by pressing out on the latches on both edges of the socket at the same time. Be sure to save the old DDR3L SDRAM for future use. 7Align the notch of the DDR3L SDRAM with the protrusion of the socket and gently insert the DDR3L SDRAM into the socket at a 30-45° angle. 8Push the DDR3L SDRAM inward toward the socket until the latches on both edges of the socket...
Page 39
Appendix. CRU instructions 35 Replacing the fan assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - To replace the fan assembly, do the following: 1Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2Close the computer display, and turn the computer over. 3Remove the battery pack. For details, see “Replacing the battery” on page 28. 4Remove the Hard disk drive/Memory/Central processing unit/Mini PCI Express...
Page 40
36 Appendix. CRU instructions 5Detach the fan connector in the direction shown by arrow and loosen the three screws to lift the fan assembly.c d c d d d