Lenovo B70 80 Laptop User Guide

Chapter 1. Getting to know your computer
7 „Connecting USB devices
You can connect a USB device to your computer by inserting its USB plug 
(Type A) into the USB port on your computer.
The first time you plug a USB device into a particular USB port on your 
computer, Windows automatically installs a driver for that device. After the 
driver is installed, you can disconnect and reconnect the device without 
performing any additional steps.
Before disconnecting a USB storage device, make sure your computer...

8
Chapter 1. Getting to know your computer
„Connecting network cables
To insert a network cable, do the following:
1Hold one connector of the network cable to press the RJ-45 cover down 
gently .
2Insert the connector into the RJ-45 port  .
„Software configuration
Consult your Internet Service Provider (ISP) for details on how to configure 
your computer.
a
b
a
b 

Chapter 1. Getting to know your computer
9
Right-side view - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Combo audio 
jackConnects to headsets.
Notes:
The combo audio jack does not support conventional microphones.
The recording function may not be supported if third-party headphones or headsets are 
connected, due to different industry standards.
Memory card slot Insert memory...

10
Chapter 1. Getting to know your computer
Front view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
System status 
indicatorsPower status indicator 
Battery status indicator 
Indicator Indicator 
statusCharge 
StatusMeaning
Power status 
indicator
On (solid 
white)— The computer is powered on.
Blinking — The computer is in sleep mode.
Off — The computer...

Chapter 1. Getting to know your computer
11 „Using memory cards (not supplied) 
Your computer supports the following types of memory card:
 Secure Digital (SD) card
 Secure Digital eXtended Capacity (SDXC) card
 Secure Digital High Capacity (SDHC) card
 MultiMediaCard (MMC)
Inserting a memory card
Slide a memory card in until it clicks into place.
Removing a memory card
Gently pull the memory card out of the memory card slot.
Attention:
Insert only one card in the slot at a time.
This card reader does...

12
Chapter 1. Getting to know your computer
Bottom view  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Battery latch -
manualThe manual battery latch is used to keep the battery pack 
secured in place.
Battery pack
Battery latch -
spring loaded
The spring-loaded battery latch keeps the battery pack 
secured in place.
Ventilation slotsAllow air to enter the computer...

13
Chapter 2. Starting to use Windows
Configuring the operating system for the 
first time  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
You may need to configure the operating system when it is first used. The 
configuration process may include the procedures below:
 Choosing a region and a language
 Accepting the license terms
 Personalizing your...

14
Chapter 2. Starting to use Windows
Putting the computer to sleep or shutting 
it down - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
When you have finished working with your computer, you can put it to sleep 
or shut it down.
„Putting your computer to sleep
If you will be away from your computer briefly, put the computer to sleep. 
When the...

Chapter 2. Starting to use Windows
15
Connecting to a wireless network  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
To connect to a wireless network, do the following:
1Press F7  to turn on the wireless feature.
2View the available wireless networks.
• Windows 7:
Click the wireless network connection status icon in the Windows 
notification area. A list of available wireless networks will be displayed.
 Windows 8.1:
Open the charms bar and select Settings...

16
Chapter 2. Starting to use Windows
Help and support  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
If you have any problems using the operating system, see the Windows Help 
and Support file. To open the Windows Help and Support file, do one of the 
following:
Windows 7:
Click Start  → Help and Support.
Windows 8.1:
 Open the charms bar and select Settings; select Help on the Settings...