Lenovo A3000h Service Manual
Have a look at the manual Lenovo A3000h Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 207 Lenovo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Lenovo IdeaTab A3000 27 cover 1010 Rear cover Figure 1. Removal steps of rear Note: Turn off the IdeaTab before you begin. Failure to do so may cause perman ent damage to the IdeaTab. Remove the battery cover from the corner 1. Remov e the battery cover in the direction shown by arrow 2.
// Lenovo IdeaTab A3000 Hardware Maintenance Manual Figure 1. Remo val steps of base cover (continued) Remove the fifteen screws 3. StepScrew (quantity) ColorTo r q u e 3 M1.4 x 3.5 mm, flat-head, nylon-coated (15) SilverNJIFP Insert a plastic plate tool 4 and gently disassemble the rear cover by the tool in e direction shown by arrows 5, then remove the rear cover in the direction hown by arrow 6. th s 28
1020 Battery “1010 Rear cover” on page 27 ANGER nly use the battery specified in the parts list for your computer. Any other battery ould ignite or explode. pack For access, remove this FRU: •• D O c F igure 2. Removal steps of battery pack isco nnect the battery connector in the direction shown by arrow 1. Gently sa ssemble the battery pack by the plastic plate tool. emove the battery pack in the direction shown by arrow 2. D di R
1030 System board he system board: hen h andling the system board, bear the following in mind. ful not to drop the system board on a bench top that has a hard g of any kind. In the whole process, make sure not to drop or stack the system board. e sure to put it only on a padded surface Important notices for handling t W • Be care surface, such as metal, wood, or composite. • Avoid rough handlin • • If you put a system board down, mak such as an ESD mat or conductive corrugated material. For access, remove these FRUs in order: “1010 Rear cover” on page 27 “ 1020 Battery pack ” on page 29 igure 3. Removal steps of system board etac h the LCD connector and touch panel connector in the direction shown by rrows 12. Remove the volume button FPC in the direction shown by arrow 3. •• •• F D a
Lenovo IdeaTab A3000 Figure 3. Removal s teps of system board (continued) emove the three screws 4. R StepScrew (quantity) ColorTo r q u e 4 M1.4 x 3.5 mm, flat-head, nylon-coated (3) SilverNJIFP 31
Figure 3. Removal steps of system board (continued) Gently turn over the system board in the direction shown by arrow 5. Detach the udio board connector in the direction shown by arrows 6 7. en in e ttached. aref ully lift the motor, and then remove the system board in the direction shown y arrow 8. a Wh stalling: Make sure that all the connectors ar firmly a C b
Lenovo IdeaTab A3000 1040 Audio “1020 Battery pack” on page 29 “1030 System board” on page 30 igure 4. Removal step of audio board emove the screw 1. board For access, remove these FRUs in order: •• “1010 Rear cover” on page 27 •• •• F R StepScrew (quantity) ColorTo r q u e 1 M1.4 x 3.5 mm, flat-head, nylon-coated (1) SilverNJIFP 33
Figure 4. Remova l step of audio board (continued) n by arrows 2. Remove the audio board in the direction show
1050 Internal or ac cess, remove these FRUs in order: “ 1010 Rear cover” on page 27 “ 1020 Battery pack ” on page 29 “ 1030 System board ” on page 30 ““ 1040 Audio board ” on page 33 igure 5. Removal steps of internal antenna emov e the internal antenna in the direction shown by arrow 1. antenna F ••• •• •• •• F R
Locations Front Micro USB port and Top view 1Touch screen 2 Front camera 3 Power button 4 Combo audio jack 5