Home > Land Rover > Automobile > Land Rover Range Rover Automatic Transmission System Rover Manual

Land Rover Range Rover Automatic Transmission System Rover Manual

Here you can view all the pages of manual Land Rover Range Rover Automatic Transmission System Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 51

$Page 51 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 25 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 315CAN level monitoringP1842N_MOTVGT_$XMMMThe CAN protocol is not compatible between the engine and transmission controller. Diagnostic operates:On arrival...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 25 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 315CAN level monitoringP1842N_MOTVGT_$XMMMThe CAN protocol is not compatible between the engine and transmission controller.
Diagnostic operates:On arrival...

Page 52

$Page 52 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 26 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 320CAN message V3 (road speed) invalid (FFh)P1884N_MOTVGT_$XMMMThe CAN message V3 (Velocity) from the engine management controller is invalid. Diagnostic...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 26 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 320CAN message V3 (road speed) invalid (FFh)P1884N_MOTVGT_$XMMMThe CAN message V3 (Velocity) from the engine management controller is invalid.
Diagnostic...

Page 53

$Page 53 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 27 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 325Solenoid valve for TC (short circuit to - or open circuit)P0743N_MOTAN8UBATTPin 32 (Solenoid valve for torque convertor lockup) is either short circuit...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 27 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 325Solenoid valve for TC  (short circuit to - or open circuit)P0743N_MOTAN8UBATTPin 32 (Solenoid valve for torque convertor lockup) is either short circuit...

Page 54

$Page 54 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 28 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 330Gear ratio monitoring, 2nd gearP0732N_MOTVGT_$XMMMRatio of engine speed to output shaft speed whilst 2nd gear is engaged is out of range. Diagnostic...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 28 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 330Gear ratio monitoring, 2nd gearP0732N_MOTVGT_$XMMMRatio of engine speed to output shaft speed whilst 2nd gear is engaged is out of range.
Diagnostic...

Page 55

$Page 55 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 29 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 335CAN message N_MOT invalid, indicated by F_N_MOTP1884N_MOTVGT_$XMMMThe CAN message from the engine management controller which informs the transmission of...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 29 of 52 FaultDescriptionCARBAmbient 1Ambient 2Ambient 335CAN message N_MOT invalid, indicated by F_N_MOTP1884N_MOTVGT_$XMMMThe CAN message from the engine management controller which informs the transmission of...

Page 56

$Page 56 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 30 of 52 5.3 Impact on the system of each fault Settings are those for Range Rover, 99MY (Software release L944e1414, 4.0l & 4.6l V8, NAS only) PriorityControlByte 2 – Protection & DefaultByte 1 – Protection &...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 30 of 52 5.3 Impact on the system of each fault
Settings are those for Range Rover, 99MY (Software release L944e1414, 4.0l & 4.6l V8, NAS only)
PriorityControlByte 2 – Protection & DefaultByte 1 – Protection &...

Page 57

$Page 57 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 31 of 526 General information 6.1 Dimensions and fixing details The transmission controller ECU is located under the front left had seat, under a black metal bracket. To remove the ECU, a medium sized philips...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 31 of 526 General information
6.1 Dimensions and fixing details
The transmission controller ECU is located under the front left had seat, under a black metal bracket.  To remove the ECU, a
medium sized philips...

Page 58

$Page 58 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 32 of 52 7 Fault tree analysis The following pages are a guide to fixing faults with the electronic automatic transmission. In order to solve fault, the fault trees indicate the most logical way a problem...$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 32 of 52 7 Fault tree analysis
The following pages are a guide to fixing faults with the electronic automatic transmission.  In order to solve  fault, the fault
trees indicate the most logical way a problem...

Page 59

$Page 59 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 33 of 52 7.1.1.2 Fault code 2 – Transmission relay control (Permanent O/C)$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 33 of 52 7.1.1.2 Fault code 2 – Transmission relay control (Permanent  O/C)

Page 60

$Page 60 System Information Document ____________________________________________________________________________________________________ _ [ZF_4SPD\Project_Specs][Revision: 2.3] ____________________________________________________________________________________________________ _ © Rover Group 1998Page 34 of 52 7.1.1.3 Fault code 3 – EEPROM communication fault 7.1.1.4 Fault code 4 – EPROM checksum fault$

System Information Document
____________________________________________________________________________________________________
_
[ZF_4SPD\Project_Specs][Revision:   2.3]
____________________________________________________________________________________________________
_
© Rover Group 1998Page 34 of 52 7.1.1.3 Fault code 3 – EEPROM communication fault
7.1.1.4 Fault code 4 – EPROM checksum fault

Start reading Land Rover Range Rover Automatic Transmission System Rover Manual

Related Manuals for Land Rover Range Rover Automatic Transmission System Rover Manual

All Land Rover manuals