Land Rover Range Rover Audio Tv Navigation System Lm Aus Rover Manual

38
On-Road Navigation
Varying the volume
You can raise or lower the volume of navigation 
instructions in relation to other audio sources.
•Turn the right rotary control (8) to select 
‘Information’.
•Press the control to confirm selection.
•Turn the control again to select ‘Volume 
navigation’.
•Press the control again to confirm selection.
•Turn the control until the desired volume 
setting is obtained.
•Press the control to confirm / store this 
setting.
Route selection Info on current location Info...

39
On-Road Navigation
MAP SYMBOLS
Depending on the destination entered and the 
map scale selected, a variety of symbols for 
facilities of general interest appear in the map 
mode. These symbols represent the following:
 Chemist
 Automobile club
 Car hire
 Station
 Bank
 Government office
 Library
 Educational facility
 Embassy
 Bus station
 Monument
 Shopping centre
 Ferry
 Fire station
 Airport
 Tourist information office
 Cash dispenser
 Law courts
 Golf course
 Hotel Industrial estate
 Marina...

40
On-Road Navigation
ROUTE SELECTION
•Turn the right rotary control (8) to select 
‘Information’.
•Press the control to confirm selection.
Selecting a route type
You can change the type of route both when 
selecting a destination and as often as desired 
while destination guidance is in operation - the 
system will always adapt to your wishes.
•Turn the right rotary control (8) to select 
‘Route selection’.
•Press the control to confirm selection.
•Turn the control to select the preferred type of...

41
On-Road Navigation
DISPLAYING A ROUTE
Route map
During destination guidance, the system can 
display a map showing the planned route.
•Turn the right rotary control (8) to select 
‘Route map’.
•Press the control to confirm selection.
The route map is automatically shown if 
destination guidance takes you into a region 
which has not yet been fully digitised on the 
inserted map CD.
Changing the map scale
•Turn the right rotary control (8) to select 
‘Scale’.
•Press the control to confirm selection....

42
On-Road Navigation
AVOIDING ROAD CONGESTION
You can, during destination guidance, deviate 
from planned sections of the route. You indicate 
the distance in miles after which you wish to 
return to the original route.
•Turn the right rotary control (8) to select ‘New 
route’.
•Press the control to confirm selection.
•Turn the control again to select the desired 
distance.
•Press the control again to confirm selection.
The system will return you automatically to the 
original route at the next...

43
On-Road Navigation
Selecting traffic information
To determine the nature of the incident:
•Turn the right rotary control (8) to select 
‘Traffic information’.
•Press the control to confirm selection.
•Turn the control again to select ‘TMC 
messages’.
•Press the control again to confirm selection.
•Turn the control to select the incident type.
Any known incidents appear in green.
•When an incident type is selected, text is 
displayed in a darker colour.
•Press the control to activate / de-activate the...

44
On-Road Navigation
To avoid the congestion, turn the right rotary 
control and select ‘Diversion’. 
The navigation system calculates a new route 
and then returns to destination guidance mode.
If you have selected another mode whilst 
destination guidance is still active and the 
navigation system detects congestion ahead, you 
are automatically prompted to take a diversion.
De-activating traffic information.
If you do not wish to receive TMC traffic 
information:
•Turn the right rotary control (8) to...

45
On-Road Navigation
VEHICLE POSITION
You can call up the present location of your 
vehicle or display a road map showing your 
position.
Vehicle position display
To call up the vehicle’s current position:
•Turn the right rotary control (8) to select 
‘Information’.
•Press the control to confirm selection.
•Turn the control again to select ‘Vehicle 
position’.
•Press the control again to confirm selection.
The current location is shown on the left of 
the screen.
•If the map is required, turn to ‘Street...

46
Off-Road Navigation
O ff-R oad  Nav igationGETTING STARTED 
With the starter switch in position ‘I’ or ‘II’ press 
the MENU button (7).
Turn the right rotary control (8) until ‘Off Road 
Navigation’ is highlighted, then press the right 
rotary control.
An information screen appears with the 
following:
“Off-road conditions may change. Always ensure 
that it is safe to make the suggested manoeuvre 
before following any navigational advice. A road 
marked on a map does not automatically confer 
right of...

47
Off-Road Navigation
NOTE: If information on a subject is needed, the 
off-road navigation system provides an 
on-screen ‘Help’ facility - see ‘NAVIGATION 
HELP’, page 57.
CREATING A ROUTE
From any guidance source, turn the right rotary 
control (8) to view the main guidance menu.
Then from the menu, highlight and select 
‘Routes’. 
From the routes menu, highlight and select 
‘Route list’.
A list of routes previously entered into the 
system is displayed, along with an entry entitled 
‘New route’ (if...