Land Rover Range Rover Audio Tv Navigation System Lm Aus Rover Manual

28
Satellite Navigation
NAVIGATION CONTROLS
2. Display
7. MENU button
Press to obtain the general menu and also to 
return to the menu from a system feature.
8. Right rotary control
Turn to select a menu item, press to confirm 
selection.
H47568
2
7 

29
On-Road Navigation
O n-Road  Nav igationGETTING STARTED
Selecting GPS navigation
If the menu is not displayed, press the MENU 
button (7). Turn the right rotary control (8), until 
“On Road Navigation” is highlighted then press 
to start the navigation system.
Select ‘Dest. input’.
Enter destination country
If the name of more than one country appears on 
the display in white letters, data for more than 
one country is stored on the map CD.
To select the destination country, if not already 
selected:...

30
On-Road Navigation
NOTE: Only those letters shown in white can be 
selected.
•Turn the right rotary control (8) and select 
“enter” to store the destination city, then 
press the control again.
Entering a street and house number
NOTE: We will use 81 Austin Place, Abingdon as 
the example destination address.
•Turn the right rotary control (8) to select 
‘Road’. 
•Press the control to confirm selection.
•Turn the control until ‘A’ is highlighted.
•Press the control again to confirm your 
selection.
In...

31
On-Road Navigation
Once the route has been calculated, the name of 
the next road to be turned into and the distance 
to this junction is shown at the top of the display, 
below the destination address. 
The direction to turn at the junction is shown by 
an arrow in the left of the display.
A change of direction is also indicated by spoken 
instruction.
Your current position is shown at the bottom left 
of the display. 
NOTE: In areas which are not yet fully covered by 
the map CD, an arrow indicates...

32
On-Road Navigation
STORING, RETRIEVING AND DELETING 
ADDRESSES
To make destination inputs quicker to perform, 
frequently used destinations can be stored in the 
‘Destination memory’ and retrieved from there 
when you need navigation guidance to them.
Storing addresses
You can store over 50 addresses and transfer 
them directly from the address book as 
navigation destinations.
•Turn the right rotary control (8) to select 
‘Information’.
•Press the control to confirm selection.
•Turn the control again...

33
On-Road Navigation
•Turn the control again to select ‘Destination 
memory’.
•Press the control again to confirm your 
selection.
•Turn the control to select ‘Retrieve address’.
•Press the control to confirm selection.
•Select the desired address - it will then be 
transferred to the destination guidance 
system.
Returning to a recently chosen destination
The last ten destinations entered are memorised.
•Turn the right rotary control (8) to select 
‘Information’.
•Press the control to confirm...

34
On-Road Navigation
If you do not know the exact place name or 
street name
Turn the right rotary control (8) to select ‘Index’ 
from the display before making an entry.
NOTE: You can select from names displayed in 
the index by first entering one or more letters of 
that name and then selecting the ‘Index’ function 
by pressing the right rotary control (8).
The index will display all the places on the map of 
a particular country and all the streets in a 
specified place. 
If place names are...

35
On-Road Navigation
The following sub-menus may be available:*
•Turn the right rotary control (8) to select 
‘Index’.
•Press the control to display the index.
•Turn the control again to choose one of the 
hotels from the alphabetical list and press to 
confirm selection. If you know the name of 
the hotel you want, you can restrict the 
number of names displayed by first entering 
one or more letters of that name before 
selecting ‘Index’.
Information on hotels can be displayed either as 
text or using...

36
On-Road Navigation
1.Turn the right rotary control (8) and select 
‘Scale’.
2.Press the control to confirm selection.
3.Turn the control until the desired scale is 
seen.
4.Press the control to select this scale.
The visible section of the map changes after a 
few seconds.
•Localise the destination with the cross-hairs:
NOTE: The map scrolls across the display (2) 
when the cross-hairs reach the edge.
1.Turn the right rotary control (8) to select 
‘Cursor’.
2.Press the control to confirm selection....

37
On-Road Navigation
•Turn the control to select ‘Info on current 
location’.
•Press the control to confirm selection.
•Turn the right rotary control (8) to select the 
destination category, e.g. ‘AIRPORT’.
•Press the control to confirm selection.
•Turn the control again to select ‘Index’ and 
choose an entry from the alphabetical list.
You can restrict the number of names 
displayed in the directory by first entering one 
or more letters of that name before selecting 
the ‘Index’ function.
•Press the...