Land Rover Iidtool For Discovery 3 Britpart Manual

P11
IIDTool
5. Activating the IIDTool
To activate the IIDTool, you will need access to the exact vehicle it will be used on. Once your activation 
code is noted, you will need an internet connection to get your unlock code.
1.  Ensure that the vehicle is in Park (or in Neutral with the handbrake applied for manual transaxle) 
and in a safe environment.  
 
 Turn the key to the ON position.
The OBD connector is located at the bottom 
dash panel above and outside the brake 
pedal on the driver’s side of...

P12
IIDTool
  Using the integrated interface
2.  Connect the IIDTool and wait until the message «IIDTool Ready» appears on your instrument 
display. If the Bluetooth interface is to be used, connect the mobile device to the tool 
(see page P9 for connecting instructions). You can now call up the IIDTool by pressing the 
Resume / Enter button for 2 seconds.  
3.  Navigate to the following submenu : IIDTool Menu->IIDTool Confi g->Enter Unlock Code
4.  Take note of the 10 characters code, go to our website...

P13
IIDTool
 
 
Using the mobile App
To proceed with the following steps, your mobile device will have to be connected on the internet. If not 
possible, you will have to fi ll up the form on our website using another device connected to the internet. 
1.  Ensure that the vehicle is in Park and in a safe environment. 
2.  Connect the IIDTool on the vehicles OBD port.
3.  Wait a few seconds and connect the IIDTool 
Pro on the mobile device.  
4.  Press on «Activate» to display the activation page:
5.  If...

P14
IIDTool
Once the unlock code is entered correctly, the IIDTool will backup the original suspension calibration 
and CCF content. Confi rmation messages will appear and the unit will enter the menu.
•  Once your IIDTool is activated, please proceed with updating the fi rmware to the latest 
version. Instructions on how to update your tool can be found on the page P7.
•  You can enable the enhanced functions on additional vehicles by purchasing additional VIN 
licenses from a Britpart dealer. Once you...

1
IIDTool
Contents, for
Land Rover Discovery 3/LR3, Range Rover Sport 2004-2009
II. Using the IIDTool D3-2
III. Menu tree D3-5
IV.  Main Menu Options D3-6
V.  Vehicle control modules software updates Defi nitions D3-SU-1
VI. Service Test Routine Defi nitions D3-SR-1
VII. Limited Warranty W1
D3- GAP Diagnostic 7/15/2014 All right reserved
User manual: Version 8, Firmware V3.0
Land Rover Discovery 3/LR3, Range Rover Sport 2004-2009 

2
IIDTool
II. Using the IIDTool
 Integrated Interface
Your IIDTool needs no additional cables or power supply. 
GAP Diagnostic 7/15/2014 All right reserved
User manual: Version 8, Firmware V3.0
Land Rover Discovery 3/LR3, Range Rover Sport 2004-2009D3-
The IIDTool is controlled with the vehicle’s cruise control 
switchgear. 
The functions are:
1.  Speed +  = Menu up / increase value
2.  Speed -   = Menu down / decrease value
3.  Resume  = Enter*
4.  On-Off     = Back one level / Exit
*When viewing a confi...

3
IIDTool
Information is displayed on the instrument cluster message center. Due to limited space, longer mes-
sages such as error codes are scrolled through automatically. 
 
   
  
 
Note: When the following symbol is displayed , the IIDTool will continue the current process after 
the Speed + / Menu up button is pressed.
D3- GAP Diagnostic 7/15/2014 All right reserved
User manual: Version 8, Firmware V3.0
Land Rover Discovery 3/LR3, Range Rover Sport 2004-2009 

4
IIDTool
 Use
1.  Ensure that the vehicle is in Park (or in Neutral with the handbrake applied for manual transaxle) 
and in a safe environment.  
 
   
•    If the vehicle is outside, start the engine.
•    If in a garage, Turn the key to the ON position. 
•    If you plan to use the device for more than 10 minutes with the engine not running, connect 
a power supply (Midtronic’s PSC-550 or equivalent) to the vehicle’s battery. 
 Note: Battery chargers are not suitable due to poor line regulation.
2....

5
IIDTool
III. Menu tree 
GAP Diagnostic 7/15/2014 All right reserved
User manual: Version 8, Firmware V3.0
Land Rover Discovery 3/LR3, Range Rover Sport 2004-2009
D3- 

6
IIDTool
IV. Main Menu Options
1.  Read fault
 
Defi nition
When an abnormal situation or behavior is detected by an ECU, it registers a fault code that can be 
accessed by a diagnostic tool. To view faults currently stored in any ECU, select the Read Fault option 
in the top level menu and press Resume / Enter to enter.
 
  Checking for faults using the Select ECU function
The ECU list will now be displayed. The menu is navigated up and down with the Speed + / Menu up 
and Speed - / Menu down buttons....