Home > Land Rover > Automobile > Land Rover Fitting The Bell Auto S Tdv6 Egr Blanking Kit To A My06 Tdv6 Hse Bellautos Manual

Land Rover Fitting The Bell Auto S Tdv6 Egr Blanking Kit To A My06 Tdv6 Hse Bellautos Manual

Add to Favourites
    Download as PDF

    View the Land Rover Fitting The Bell Auto S Tdv6 Egr Blanking Kit To A My06 Tdv6 Hse Bellautos Manual for free. All the Land Rover manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 Fitting the Bell Auto Services (B-A-S) TDV6 EGR Blanking Kit to a 2006 model Discovery 3 TDV6 HSE Before I describe how I did this, I must first add a disclaimer: You do this modification at your own risk. I won’t be held responsible for what I have written here. Here’s a picture of the Bell Auto Services TDV6 D3&RRS EGR blanking kit: The kit replaces the EGR pipes with suitable blanks fitted to the EGR valves and the butterfly housing. You will need all 4 O-rings – 2 are fitted to each...
    Page 2 View of engine with top cover removed – right hand EGR valve shown in inset Now unplug the EGR butterfly valve actuator and air box connectors Butterfly valve connector (lower) and air box connector (upper) At this point, it’s a good idea to spray some WD40 onto the bolts securi ng the EGR pipes to the valves. The bolts get pretty corroded because of where they are and we don’t want them to shear them off ! Have a good look at the clip securing the air box to the EGR butterfly valve...
    Page 3 Air box to EGR butterfly housing securing clip Loosen the jubilee clip securing the air inlet pipe to the right hand side of the air box then disconnect the pipe from the air box. Note. The jubilee clip is secured to the pipe w ith some sort of retaining clip and will not slide down the pipe so just loosen it enough to clear the lip on the air box allowing you to remove the pipe. Air inlet pipe to air box jubilee clip Completely undo the bolt securing the lower part of air box and...
    Page 4 Air box lower bolt Warning. From now on, take great care not to drop anything into the now open EGR butterfly housing. If anything ends up in there and the engine is started, severe damage is likely to result. Not only that, be very careful where you put the air box – you ma y not notice if anything falls into it or your kids decide it would make a good receptacle for bits of gravel etc. Air box removed Remove the cabling from the right hand and left hand EGR pipe brackets. On my car,...
    Start reading Land Rover Fitting The Bell Auto S Tdv6 Egr Blanking Kit To A My06 Tdv6 Hse Bellautos Manual

    Related Manuals for Land Rover Fitting The Bell Auto S Tdv6 Egr Blanking Kit To A My06 Tdv6 Hse Bellautos Manual

    All Land Rover manuals