Land Rover Defender 300 Tdi Electrical Library Rover Manual
Here you can view all the pages of manual Land Rover Defender 300 Tdi Electrical Library Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 1
Electrical Library Elektrotec hnische Bibliotheek Librairie électrique Handbuc h Elektrik Libreria Impianto Elettrico Biblioteca El éctrica Livr aria El éctrica
Page 2
DEFENDER 90, 110, 130 Electrical Library This Manual should be used in conjunction with the following publications: LRL 0097ENG Workshop Manual LRL 0125ENG Electrical Circuit Diagrams Publication Part No. LRL 0126ENG Published by Rover Technical Communication Ó1997 Rover Group Limited
Page 3
CONTENTS DEFENDER 97 MY 1. INTRODUCTION ELECTRICAL PRECAUTIONS 1.3.......................................................... ABBREVIATIONS 1.6............................................................................... HOW TO USE THIS DOCUMENT 1.7..................................................... WIRE COLOUR CODES 1.10.................................................................. 2. FUSE DETAILS INTRODUCTION 2.1...................................................................................
Page 4
CONTENTS DEFENDER 97 MY INTERIOR ILLUMINATION 4.31.............................................................. INSTRUMENTS 4.32................................................................................ CLOCK 4.34............................................................................................. IN-CAR ENTERTAINMENT 4.35.............................................................. CIGAR LIGHTER 4.36.............................................................................. 5....
Page 5
INTRODUCTION DEFENDER 97 MY1.1 This document is intended to assist in diagnosing electrical faults, and should be used in conjunction with the Electrical Circuit Diagrams. The document is divided into the following sections: 1. INTRODUCTION- includes Electrical Precautions, a list of Abbreviations and general information on how to use the document. 2. FUSE DETAILS- provides details of location, rating in Amps, wire colour and circuit(s) protected. 3. EARTH POINTS AND HEADER JOINTS- provides details of...
Page 6
INTRODUCTION 1.2 DEFENDER 97 MY Battery Voltage Before commencing diagnosis of electrical problems verify the condition of the battery is acceptable by using the open circuit voltage test. Open circuit voltage test 1.Switch off all electrical loads on the vehicle. 2.Adjust digital multimeter to read dc volts on the appropriate scale. 3.Connect test probes across battery terminals ensuring that polarity is correct and record the voltage displayed. A reading of 12.3V or more is acceptable; any battery...
Page 7
INTRODUCTION DEFENDER 97 MY1.3 ELECTRICAL PRECAUTIONS General The following guidelines are intended to ensure the safety of the operator whilst preventing damage to the electrical and electronic components fitted to the vehicle. Where necessary, specific precautions are detailed in the relevant sections of this document, reference to which should be made prior to commencing repair operations. Equipment - Prior to commencing any test procedure on the vehicle ensure that the relevant test equipment is...
Page 8
INTRODUCTION 1.4 DEFENDER 97 MY Connectors and Harness - The engine compartment of a vehicle is a particularly hostile environment for electrical components and connectors. Always ensure these items are dry and oil free before disconnecting and connecting test equipment. Never force connectors apart either by using tools or by pulling on the wiring harness. Always ensure locking tabs are disengaged before removal and note orientation to enable correct reconnection. Ensure that any protective covers and...
Page 9
INTRODUCTION DEFENDER 97 MY1.5 Disciplines Switch off ignition prior to making any connection or disconnection in the system as electrical surge caused by disconnecting live connections can damage electronic components. Ensure hands and work surfaces are clean and free of grease, swarf, etc. as grease collects dirt which can cause tracking or high-resistance contacts. When handling printed circuit boards, treat them as you would a brake disc - hold by the edges only; note that some electronic components...
Page 10
INTRODUCTION 1.6 DEFENDER 97 MY ABBREVIATIONS A - Amps ac - Alternating current A/C or Aircon - Air conditioning BBUS - Battery backed up sounder Cav - Cavity Cct - Model or feature applicability Col - Colour dc - Direct current ECU - Electronic control unit ECM - Engine control module EGR - Exhaust gas recirculation EKA - Emergency key access HRW - Heated rear window IACV - Idle air control valve ICE - In-car entertainment LED - Light emitting diode LH - Left hand LHD - Left hand drive Link - Fusible...