Land Rover Defender 1999 2002my Workshop Supplement Body Repair 2nd Edition Rover Manual

10MAINTENANCE
22
MAINTENANCE SHOCK ABSORBERS
1.Check for signs of leakage from suspension
dampers.
2.Check for signs of suspension damper damage.TOWING BRACKET
1.Check security of towing bracket. 

MAINTENANCE
23
MAINTENANCE ENGINE AND TRANSMISSION MOUNTINGS
1.Check condition of front LH engine mounting.
Tighten fixings if necessary.See ENGINE ,
Repair.
2.Check condition of front RH engine mounting.
Tighten fixings if necessary.See ENGINE ,
Repair.
3.Check condition of rear LH gearbox mounting.
Tighten fixings if necessary.See ENGINE ,
Repair.
4.Check condition of rear RH gearbox mounting.
Tighten fixings if necessary.See ENGINE ,
Repair.ROAD TEST
There are two purposes for conducting a road test....

10MAINTENANCE
24
MAINTENANCE ENDORSE SERVICE RECORD
1.Insert date and mileage of next service.
2.Insert current mileage.
3.Tick one of the boxes on the brake fluid
replacement indicator.
4.Endorse service record with dealer stamp.
5.Sign and date the service record.
6.Sign and date the maintenance check sheet.REPORT ANY UNUSUAL FEATURES
1.Produce a written report detailing additional work
necessary, or items which may require attention
prior to the next service. 

12 - ENGINE
CONTENTS
Page
DESCRIPTION AND OPERATION
TD5 ENGINE 1........................................................................................................
GENERAL 12..........................................................................................................
CYLINDER BLOCK 13............................................................................................
CRANKSHAFT, SUMP AND OIL PUMP 22............................................................
CYLINDER HEAD...

12 - ENGINE
CONTENTS
Page
OIL SEAL - TIMING COVER 32..............................................................................
TIMING CHAIN AND SPROCKETS 33...................................................................
OVERHAUL
GASKET - INLET MANIFOLD 1..............................................................................
GASKET - EXHAUST MANIFOLD 2.......................................................................
GASKET - CYLINDER HEAD...

ENGINE
1
DESCRIPTION AND OPERATION TD5 ENGINE 

12ENGINE
2
DESCRIPTION AND OPERATION Cylinder block components 

ENGINE
3
DESCRIPTION AND OPERATION 1.Oil dipstick tube
2.Screw - oil dipstick tube to camshaft carrier
3.Oil dipstick
4.2nd piston ring
5.Piston
6.Small-end bush
7.Connecting rod
8.Big-end bearing cap
9.Connecting rod bolt (2 off per connecting rod)
10.Top piston ring
11.Oil control ring
12.Circlips (2 off per gudgeon pin)
13.Gudgeon pin
14.Big-end bearing shells
15.Dowels to cylinder head (2 off)
16.Gearbox shim plate
17.Rear crankshaft seal and housing
18.Screws - crankshaft seal flange to engine block...

12ENGINE
4
DESCRIPTION AND OPERATION Crankshaft, sump and oil pump 

ENGINE
5
DESCRIPTION AND OPERATION 1.Crankshaft pulley bolt
2.TV Damper to crankshaft pulley bolts (3 off)
3.TV Damper
4.Crankshaft pulley
5.Woodruff key
6.Crankshaft
7.Crankshaft to flywheel dowel
8.Spigot bush
9.Flywheel to crankshaft bolts (8 off)
10.Flywheel assembly
11.Main bearing shells (6 pairs)
12.Main bearing caps (6 off)
13.Main bearing cap bolts (12 off)
14.Thrust washer (2 off at No. 3 Main bearing)
15.Piston lubrication jets (5 off)
16.Piston lubrication jet cap head screw (5 off)...