LaCie 526 Users Manual

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 21
SymbolMenu titleExplanation
SHARPNESSThis function digitally maintains crisp images with all signal timings. \
It adjusts continuously 
to set images as distinct or as soft as you prefer. It may be set indepe\
ndently by different 
timings.
DVI SELECTIONThis function selects the DVI input mode (DVI-I). When the DVI selecti\
on has been 
changed, the computer has to be restarted.
AUTO
By using the D-SUB to DVI-A cable, the DVI...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 22
SymbolMenu titleExplanation
VIDEO DETECTSelects the method of video detection when more than one computer is connected.
FIRST
The video input must be switched to FIRST mode. When the primary video input signal is 
lost, the monitor searches for a secondary signal from the alternate video input port. If 
a video signal is present, the monitor will automatically switch to the \
active source. The 
monitor will not look for other...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 23
SymbolMenu titleExplanation
LANGUAGEOSD Control menus are available in eight languages.
OSD LEFT/RIGHTYou can choose where you would like the OSD Control image to appear on y\
our screen. 
Selecting OSD Location allows you to manually adjust the position of the OSD Control 
menu Left or Right.
OSD DOWN/UPYou can choose where you would like the OSD Control image to appear on y\
our screen. 
Selecting OSD Location allows you to...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 24
SymbolMenu titleExplanation
RESOLUTION NOTIFIERThe optimal resolution is 1920 x 1200. If ON is selected, a message will appear on the 
screen after 30 seconds, notifying you that the resolution is not at 192\
0 x 1200. 
HOT KEYWhen this function is set to ON, you can adjust BRIGHTNESS (LEFT or RIGHT buttons) 
and CONTRAST (DOWN  or UP  buttons) when the OSD menu is off. The stan\
dard OSD 
can be accessed with the EXIT button....

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 25
Explanation
OSD Warning menus disappear with the EXIT button.
NO SIGNAL
Provides a warning when there is no Horizontal or Vertical Sync. After the power is turned on or when there is a change of input 
signal, the No Signal window will appear.
RESOLUTION NOTIFIER
This function gives a warning to use the optimal resolution. The RESOLUTION NOTIFIER window will open after power is turned 
on, when there is a change of input signal,...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 26
TagMenu titleExplanation
Tag1BRIGHTNESSAdjusts the overall image and screen background brightness.
Press LEFT or RIGHT to adjust.
When AUTO LUMINANCE is OFF or 2, the brightness level is adjusted/measured using 
percentage (%).
When AUTO LUMINANCE is 1 or 3, the brightness level is adjusted/measured using cd/m2. 
This is the “Estimated Brightness” level.
The upper portion (higher settings) of the brightness level is adjuste\
d...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 27
TagMenu titleExplanation
Tag2R-H.POSITION
(Analog Input Only)
Adjusts the position of the red component of the image. Press LEFT or RIGHT to adjust.
G-H.POSITION
(Analog Input Only)
Adjusts the position of the green component of the image. Press LEFT or RIGHT to adjust.
B-H.POSITION
(Analog Input Only)
Adjusts the position of the blue component of the image. Press LEFT or RIGHT to adjust.
R-FINE
(Analog Input Only)
Adjusts the...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 28
TagMenu titleExplanation
Tag2G-SHARPNESS
(Analog Input Only)
Adjusts the sharpness of the green component of the image.  Press LEFT or RIGHT to adjust.
B-SHARPNESS
(Analog Input Only)
Adjusts the sharpness of the blue component of the image.  Press LEFT or RIGHT to adjust.
DVI Long Cable
(Digital Input Only)
Compensates for image degradation caused by using a long DVI cable.  There are 4 possible 
settings, with “0” being the...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 29
TagMenu titleExplanation
Tag3A-NTAA SW          
(Analog Input Only)
The Advanced No Touch Auto Adjust function is able to recognize new signals even when 
the resolution and the refresh rate have not been changed. If several PCs are connected to 
the monitor, each transmitting very similar (or even the same) resolut\
ion and refresh rate 
signals, the monitor recognizes the new signal and automatically optimizes the picture....

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 30
TagMenu titleExplanation
Tag4V. RESOLUTIONAdjusts the vertical size by increasing or decreasing the setting.  Pres\
s the RIGHT button to 
expand the height of the image on the screen.  Press the LEFT button to narrow the height of 
the image on the screen.
EXPANSIONSets the zoom method.
FULL: The image is expanded to 1920 x 1200 regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF:...