LaCie 526 Users Manual

LaCie 500 Series LCD Monitor Installing Your LaCie Monitor
User Manual page 11
5. Place hands on each side of the monitor to tilt the LCD panel 
to a 30-degree angle and gently tilt in an upward direction to 
the highest position (Fig. 04).
6. Attach all cables to their appropriate interfaces (Fig. 04).
7. To keep the cables neatly organized, place them into the 
cable management system that is built into the stand.
 ❖Place the D-SUB cable (not included) and the power cable 
into the specific hooks as...

LaCie 500 Series LCD Monitor Installing Your LaCie Monitor
User Manual page 12
7. Hold all cables firmly and place the cable cover onto the stand. 
To remove the cable cover, lift the cover off as shown in Fig. 
08.
8. Connect one end of the power cord to the AC inlet on the back 
of the monitor and the other end to the power outlet.
9. The Vacation Switch on the left side of the monitor must be 
turned on in order to use the front power button. It is best 
to leave the Vacation Switch on all the time...

LaCie 500 Series LCD Monitor Using Your LaCie Monitor
User Manual page 13
3. Using Your LaCie 500 Series LCD Monitor
3.1. Physical Adjustments
3.1.1. Raise and Lower the Monitor Screen
The monitor may be raised or lowered in either Portrait or Land-
scape modes.
To raise or lower the screen, place hands on each side of the 
monitor and lift or lower to the desired height (Fig. 11 and Fig. 
12). 
Fig. 11 Fig. 12 
3.1.2. Screen Tilt
Grasp the top and bottom sides of the monitor screen with your 
hands and...

LaCie 500 Series LCD Monitor Using Your LaCie Monitor
User Manual page 14
3.1.3. Screen Rotation
Before rotating, the screen must be raised to its highest level in order 
to avoid an accidental fall and pinching your fingers. To raise the 
screen, place your hands on each side of the monitor and lift to the 
highest position (Fig. 12).
To rotate the screen, place hands on each side of the monitor and 
turn clockwise from Landscape to Portrait or counterclockwise from 
Portrait to Landscape (Fig. 14 and...

LaCie 500 Series LCD Monitor Using Your LaCie Monitor
User Manual page 15
3.1.5. Remove the Monitor Stand for 
Mounting
To prepare the monitor for mounting:
1. Disconnect all cables.
2. Place hands on each side of the monitor and lift it to the high-
est position (Fig. 12).
3. Place monitor face down on a non-abrasive surface (Fig. 17).Fig. 17 
Fig. 18 Fig. 19 
4. Place one hand around the base and one hand on the Quick 
Release Lever. Move the Quick Release Lever to the right, as 
indicated by the...

LaCie 500 Series LCD Monitor Using Your LaCie Monitor
User Manual page 16
3.1.6. Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. Follow 
the following steps:
1. See section 3.1.5. Remove the Monitor Stand for Mounting 
for instructions on how to remove the stand.
2. To attach the LaCie monitor to a flexible arm, use the four 
screws that were removed in 3.1.5. Remove the Monitor 
Stand for Mounting (Fig. 20).
IMPORTANT INFO:  When mounting, use ONLY the screws 
that...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 17
4. OSD (On-Screen Display) Control Menu Functions
To access the OSD menu, press MENU. To change the sig-
nal input, press SELECT.
1 POWERTurns the monitor on and off.
2 LEDIndicates that the power is on via the blue LED. 
3 INPUT/SELECTEnters the OSD Control menu and submenus. Changes the input source when not in the OSD Control 
menu.
4 MENU/EXITAccess to the OSD menu. Exits the OSD Control menu and submenu.
5...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 18
SymbolMenu titleExplanation
BRIGHTNESSAdjusts the overall image and background screen brightness. When PROGRAMMABLE is 
set by PICTURE MODE, the BRIGHTNESS cannot be adjusted.
CONTRASTAdjusts the image brightness in relation to the background.
BLACK LEVELAdjusts the BLACK LEVEL.
4.1. Brightness/Contrast Controls
SymbolMenu titleExplanation
Automatically adjusts the IMAGE POSITION and H. SIZE settings and FINE settings.
4.2. Auto...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 19
SymbolMenu titleExplanation
LEFT/RIGHTControls Horizontal Image Position within the display area of the LCD.
DOWN/UPControls Vertical Image Position within the display area of the LCD.
H.SIZE (V.SIZE)
(Analog Input Only)
Adjusts the horizontal size. If the AUTO ADJUST function does not provide a satisfactory 
picture setting, further tuning can be performed using the H.SIZE (OR V\
.SIZE) function 
(dot clock). A Moiré test...

LaCie 500 Series LCD Monitor OSD Control Menu Functions
User Manual page 20
SymbolMenu titleExplanation
For presets 1, 2, 3 and 5, the following levels can be adjusted:
TEMPERATUREAdjusts the white temperature. A lower color temperature will veer toward red while a 
higher color temperature will appear more blue.
WHITE (White Balance):If TEMPERATURE requires further adjustment, the individual R/G/B levels of the white 
point can be adjusted. To adjust them, use CUSTOM as your TEMPERATURE selection....