LaCie 321 Users Manual

LaCie 300 Series LCD Monitor
User Manualpage 
Installing Your LaCie Monitor
3.  Place  hands  on  each  side  of  the  monitor  to  tilt  the 
LCD  panel  to  a  30-degree  angle  and  lift  up  to  the 
highest position (Figure D).
4. Connect all cables to the appropriate connectors (Fig-
ure D).
5. To keep the cables neatly organized, place them into 
the  cable  management  system  that  is  built  into  the 
stand.
Place  the  D-Sub  cable  (not  included)  and  the 
power  cable  into...

LaCie 300 Series LCD Monitor
User Manualpage 
Installing Your LaCie Monitor
TeChNICAl  NOTe:  Please  refer  to  Caution 
section  of  this  manual  for  proper  selection  of  AC 
power cord.
7. Hold all cables firmly and place the cable cover onto 
the stand (Figure H). To remove the cable cover, lift 
the cover off as shown in Figure H.
8.  Connect  one  end  of  the  power  cord  to  the  AC  inlet 
on the back of the monitor and the other end to the 
power outlet.
9.  The  Vacation...

LaCie 300 Series LCD Monitor
User Manualpage 
Using Your LaCie Monitor
3. Using Your LaCie 300 Series LCD Monitor
3.1. Physical Adjustments
The monitor may be raised or lowered in either Por-
trait or Landscape mode.
To  raise  or  lower  screen,  place  hands  on  each  side 
of  the  monitor  and  lift  or  lower  to  the  desired  height 
(Figure A and B).
TeChNICAl  NOTe:  Handle  with  care  when 
raising or lowering the monitor screen.
Figure BFigure A
3.1.1. Raise and lower monitor...

LaCie 300 Series LCD Monitor
User Manualpage 
Using Your LaCie Monitor
Before  rotating,  the  screen  must  be  raised  to  the 
highest  level  to  avoid  knocking  the  screen  on  the  desk 
or pinching with your fingers.
To  raise  the  screen,  place  your  hands  on  each  side 
of the monitor and lift up to the highest position (page 
13, figure B).
To rotate the screen, place hands on each side of the 
monitor  screen  and  turn  clockwise  f rom  Landscape  to 
Portrait or...

LaCie 300 Series LCD Monitor
User Manualpage 
Using Your LaCie Monitor
3.1.5. Remove monitor stand for mounting■
To  prepare  the  monitor  for  alternate  mounting  pur-
poses:
1. Disconnect all cables.
2. Place hands on each side of the monitor and lift up to 
the highest position.
3.  Place  monitor  face  down  on  a  non-abrasive  surface 
(Figure G).
Figure G
TeChNICAl  NOTe: Use only VESA-compat-
ible alternative mounting method (100 mm pitch).
ImpOrTANT INfO : Handle with care when...

LaCie 300 Series LCD Monitor
User Manualpage 
Using Your LaCie Monitor
3.1.6. Flexible arm installation■
This  LCD  monitor  is  designed  for  use  with  a  flex-
ible arm.
1.  Follow  the  instructions  on  how  Remove  Monitor 
Stand for Mounting to remove the stand.
2. Using the 4 screws f rom the stand removal and attach 
the arm to the monitor (Figure J).
Figure J
ImpOrTANT  INfO :    Use  ONLY  the  screws 
that are included when mounting to avoid damage 
to the monitor and stand.
To...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
4. OSD (On-Screen Display) Control Button Functions
To access OSD menu, press any of the control but-
tons (EXIT, LEF T, RIGHT, UP, DOWN).
To change signal input, press the SELECT button.
TeChNICAl  NOTe: The OSD must be closed 
in order to change signal input.
1 POWERTurns the monitor on and off.
2 LEDIndicates that the power is on. 
3 INPUT/SELECTEnters OSD sub menus. Changes the input source when not in the OSD...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
SymbolMenu titleExplanation
BRIGHTNESSAdjusts the overall image and background screen brightness.
CONTRASTAdjusts the image brightness in relation to the background.
BLACK LEVELAdjust the black level.
4.1. Brightness/Contrast Controls
SymbolMenu titleExplanation
Automatically adjusts the Image Position and H. Size settings and Fine settings.
4.2. Auto Adjust (Analog input only)
4.3. Image Controls
SymbolMenu...

LaCie 300 Series LCD Monitor
User Manualpage 
OSD Control Button Functions
SymbolMenu titleExplanation
H.SIZE ( V.SIZE)
(Analog input only)
Adjusts the horizontal size by increasing or decreasing this setting. If the 
“AUTO Adjust function” do not give you a satisfactory picture setting, a further 
tuning can be performed using the “H.Size (or V.Size)” function (dot clock). 
For this a Moiré test pattern could be used. This function may alter the width of 
the picture. Use LEF T/RIGHT Menu to...

LaCie 300 Series LCD Monitor
User Manualpage 0
OSD Control Button Functions
SymbolMenu titleExplanation
Seven color presets select the desired color setting (sRGB, NATIVE and PROGRAMMABLE color 
presets are standard and cannot be changed).
1, 2, 3 and 5: Increases or decreases Color temperature, Red, Yellow, Green, Cyan, Blue, Magenta de-
pending upon which is selected. The change in color will appear on screen and the direction (increase or 
decrease) will be shown by the color bars.
NATIVE,...