LaCie 321 Users Manual

							
LaCie 300 Series LCD Monitor
User Manualpage 
Table of Contents
Table of Contents
For ward	
Safety Precautions and Maintenance 
3
Health and Ergonomic Precautions 
4
Environmental Regulations 
5
Manufacturer’s Recycling and Energy Information 
6
Monitor	Specifications	
7
1. 	Introduction	to	 Your	LaCie	300	Series	LCD	Monitor	
8
1.1. 300 Series Monitor Capabilities 
8
1.2. Minimum System Requirements 
9
1.3. Package Content 
9
2. 	Installing	 Your	LaCie	300	Series	LCD	Monitor	 1
0
3. 	Using	 Your	LaCie	300	Series	LCD	Monitor	 1
3
3.1. Physical Adjustments  1
3
3.1.1. Raise and lower monitor screen  1
3
3.1.2. Screen tilt  1
3
3.1.3. Screen rotation  1
4
3.1.4. Swivel  1
4
3.1.5. Remove monitor stand for mounting  1
5
3.1.6. Flexible arm installation  1
6
4. 	OSD	(On-Screen	Display)	Control	Button	Functions	 1
7
4.1. Brightness/Contrast Controls  1
8
4.2. Auto Adjust (Analog input only)  1
8
4.3. Image Controls  1
8
4.4. Color Control Systems  2
0
4.5. Tools 1  2
0
4.6. Menu Tools  2
3
4.7. Information  2
4
4.8. OSD Warnings  2
5
4.9. Advanced Menu Functions  2
5
4.10. Using the Auto Brightness Function  3
4
5. 	Troubleshooting	 3
6
6. 	Contacting	Customer	Support	 3
8
6.1. LaCie Technical Support Contacts  3
9
7. 	Warranty	Information	 4
0
Downloaded	from	ManualMonitor.com	Manuals 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Copyrights
Copyright © 2006 LaCie. All rights 
reserved.  No  part  of  this  publication 
may be reproduced, stored in a retrieval 
system, or transmitted in any form or by 
any means, electronic, mechanical, pho-
tocopying, recording or otherwise, with-
out the prior written consent of LaCie.
Changes
The material in this document is for 
information  only  and  subject  to  change 
without  notice.  While  reasonable  ef-
forts have been made in the preparation 
of  this  document  to  assure  its  accuracy, 
LaCie  assumes  no  liability  resulting 
f rom  errors  or  omissions  in  this  docu-
ment,  or  f rom  the  use  of  the  informa-
tion  contained  herein.  LaCie  reserves 
the  right  to  make  changes  or  revisions 
in  the  product  design  or  the  product 
manual without reservation and without 
obligation  to  notify  any  person  of  such 
revisions and changes.
FCC Declaration of Conformity:
Tested To Comply With FCC standardsFor Home of Office Use
LaCie 300 SeriesLCD Monitor
NOTE:  This  equipment  has  been 
tested  and  found  to  comply  with  the 
limits  for  a  Class  B  digital  device,  pur-
suant  to  Part  15  of  the  FCC  Rules. 
These  limits  are  designed  to  provide 
reasonable  protection  against  harm-
ful  interference  in  a  residential  instal-
lation.  This  equipment  generates,  uses 
and  can  radiate  radio  f requency  energy 
and,  if  not  installed  and  used  in  accor-
dance  with  the  instructions,  may  cause 
harmful  interference  to  radio  commu-
nications.  However,  there  is  no  guaran-
tee  that  interference  will  not  occur  in  a 
particular installation. If this equipment 
does cause harmful interference to radio 
or television reception, which can be de-
termined  by  turning  the  equipment  off 
and on, the user is encouraged to try and 
correct  the  interference  by  one  or  more 
of the following measures:
Reorient or relocate the receiving an-
tenna.
Increase  the  separation  between  the 
equipment and receiver.
Connect the equipment into an out-
let on a circuit different f rom that to 
which the receiver is connected.
Consult the dealer or an experienced 
radio/TV technician for help.
Use  only  shielded  cables  to  connect 
I/O devices to this equipment.
Use  the  attached  specified  cables 
with  the  LaCie  300  Series  color  moni-
tor so as not to interfere with radio and 
television reception.
1.  The power supply cord you use must 
have  been  approved  by  and  comply 
with  the  safety  standards  of  U.S.A. 
and meet the following condition. 
Power supply 
chord
Non shield type, 
3-conductor
Length2.0 m
Plug shape
(USA)
2.  Please use the supplied shielded video 
signal cable, 15-pin mini D-SUB to 
•
•
•
•
•
DVI-A  cable  or  DVI-D  to  DVI-D 
cable. Use of other cables and adapt-
ers may cause interference with radio 
and television reception.
U.S. 	Responsible	Party:
  LaCie, LTD
Address:    22985 NW Evergreen Pkwy
    Hillsboro, OR 97124
Tel. 	No.: 		
(503) 844-4503
Manufacturer’s Declaration for 
CE Certification
We,  LaCie,  solemnly  declare  that  this 
product  conforms  to  the  following  Eu-
ropean standards:
EN60950-1, EN61000-3-2
EN61000-3-3, EN55024
With  reference  to  the  following  condi-
tions:
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
LaCie, Inc.
17, Rue Ampère
91349 Massy Cedex, France
•
•
•
•
For ward
CAUTION:  Modifications  not 
authorized  by  the  manufacturer 
may  void  the  user’s  authority  to 
operate  this  device.  Modifications 
not authorized by the manufactur-
er  may  void  the  user’s  authority  to 
operate this device.
CAUTION:  A  shielded-type 
power  cord  is  required  in  order  to 
meet FCC emission limits and also 
to prevent interference to the near-
by radio and television reception. It 
is  essential  that  only  the  supplied 
power cord be used.
  
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Safety Precautions and Maintenance
Safety Precautions and Maintenance
DO  NOT  OPEN  THE  MONI-
TOR.  There  are  no  user  serviceable 
parts inside and opening or removing 
covers  may  expose  you  to  dangerous 
shock hazards or other risks. Refer all 
servicing to qualified service person-
nel.
Do not spill any liquids into the cabi-
net or use your monitor near water.
Do not insert objects of any kind into 
the  cabinet  slots,  as  they  may  touch 
dangerous  voltage  points,  which  can 
be harmful or fatal or may cause elec-
tric shock, fire or equipment failure.
Do  not  place  any  heavy  objects  on 
the  power  cord.  Damage  to  the  cord 
may cause shock or fire.
Do not place this product on a slop-
ing or unstable surface, as the moni-
tor may fall, causing serious damage.
Do  not  place  any  objects  onto  the 
monitor  and  do  not  use  the  monitor 
outdoors.
The  inside  of  the  fluorescent  tube 
located  within  the  LCD  monitor 
contains  mercury.  Please  follow  the 
bylaws or rules of    
your  municipality  to  dispose  of  the 
tube properly.
Do not bend power cord.
Do not use monitor in high tempera-
tured, humid, dusty, or oily areas.
Do not cover vent on monitor.
Immediately  unplug  your  monitor 
f rom  the  outlet  and  refer  servicing  to 
•
•
•
•
•
•
•
•
•
•
qualified  personnel  under  the  following 
conditions:
When the power supply cord or plug 
is damaged.
If  liquid  has  been  spilled,  or  objects 
have fallen into the monitor.
If  the  monitor  has  been  exposed  to 
rain or water.
If  the  monitor  has  been  dropped  or 
the cabinet damaged.
If the monitor does not operate nor-
mally by following operating instruc-
tions.
If glass is broken, handle with care.
If  monitor  or  glass  is  broken,  do  not 
come in contact with the liquid crys-
tal and handle with care.
Allow  adequate  ventilation  around 
the monitor so that heat can properly 
dissipate.  Do  not  block  ventilated 
openings  or  place  the  monitor  near 
a  radiator  or  other  heat  sources.  Do 
not put anything on top of monitor.
The power cable connector is the pri-
mary means of detaching the system 
f rom  the  power  supply. The  monitor 
should  be  installed  close  to  a  power 
outlet which is easily accessible.
Handle with care when transporting. 
Save packaging for transporting.
Image  Persistence:  Please  be  aware 
that  LCD  Technology  may  experi-
ence a phenomenon known as Image 
Persistence.
•
•
•
•
•
•
•
•
•
•
•
Image  Persistence  occurs  when  a  re-
sidual or “ghost” image of a previous 
image  remains  visible  on  the  screen. 
Unlike  CRT  monitors,  LCD  moni-
tors’  image  persistence  is  not  per-
manent,  but  constant  images  being 
displayed  for  a  long  period  of  time 
should  be  avoided.  To  alleviate  im-
age  persistence,  turn  off  the  monitor 
for as long as the previous image was 
displayed.  For  example,  if  an  image 
was on the monitor for one hour, the 
monitor should be turned off for one 
hour to erase the image.
When  operating  the  LaCie  300  Se-
ries LCD Monitor with a 220-240V 
AC power source in Europe, use the 
power cord provided with the moni-
tor.
In the UK, a BS approved power cord 
with a moulded plug has a Black (five 
Amps) fuse installed for use with this 
equipment.
If  a  power  cord  is  not  supplied  with 
this  equipment  please  contact  your 
supplier.
When  operating  the  LaCie  300  Se-
ries LCD Monitor with a 220-240V 
AC power source in Australia, use the 
power cord provided with the moni-
tor.  If  a  power  cord  is  not  supplied 
with  this  equipment  please  contact 
your supplier.
For  all  other  cases,  use  a  power  cord 
that  matches  the  AC  voltage  of  the 
power  outlet  and  has  been  approved 
by and complies with the safety stan-
dard of your particular country.
•
•
•
•
•
•
 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Health and Ergonomic Precautions
Correct  placement  and  adjustment 
of the monitor can reduce eye, shoulder 
and  neck  fatigue.  Check  the  following 
when you position the monitor:
For  optimum  performance,  allow  20 
minutes for warm-up.
Adjust the monitor height so that the 
top of the screen is at or slightly be-
low eye level.  Your eyes should look 
slightly downward when viewing the 
middle of the screen.
Position your monitor no closer than 
40  cm  and  no  further  away  than  70 
cm  f rom  your  eyes. The  optimal  dis-
tance is 50 cm.
•
•
•
Rest your eyes periodically by focus-
ing on an object at least 20 feet away. 
Blink often.
Position  the  monitor  at  a  90°  angle 
to windows and other light sources to 
minimize  glare  and  reflections.  Ad-
just  the  monitor  tilt  so  that  ceiling 
lights do not reflect on your screen.
If  reflected  light  makes  it  hard  for 
you  to  see  your  screen,  use  an  anti-
glare filter.
Clean the lcd monitor surface with a 
lint-f ree,  non-abrasive  cloth.  Avoid 
using  any  cleaning  solution  or  glass 
cleaner!
•
•
•
•
Adjust  the  monitor’s  brightness  and 
contrast  controls  to  enhance  read-
ability.
Use  a  document  holder  placed  close 
to the screen.
Position whatever you are looking at 
most of the time (the screen or refer-
ence material) directly in f ront of you 
to minimize turning your head while 
you are typing.
Avoid  displaying  fixed  patterns  on 
the monitor for long periods of time 
to avoid image persistence (after-im-
age effects).
•
•
•
•
Health and Ergonomic Precautions
To  maximize  ergonomics  benefits, 
we recommend the following:
Adjust the brightness until the back-
ground raster disappears.
Do  not  position  the  contrast  control 
to its maximum setting.
Use the preset size and position con-
trols with standard signals.
•
•
•
Use the preset color setting.
Use  non-interlaced  signals  with  a 
vertical  ref resh  rate  between  60-75 
hz. 
Do  not  use  primary  color  blue  on  a 
dark  background,  as  it  is  difficult  to 
see  and  may  produce  eye  fatigue  to 
insufficient contrast.
•
•
•
 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Environmental Regulations
Congratulations!    You 
have  just  purchased  a 
TCO’03  approved  and 
labeled  product!  Your 
choice  has  provided  you  with  a  prod-
uct developed for professional use. Your 
purchase has also contributed to reduc-
ing  the  burden  on  the  environment  an 
to  the  further  development  of  environ-
mentally adapted electronics products.
Why do we have environmen-
tally labeled computers?
In  many  countries,  environmen-
tal  labeling  has  become  an  established 
method  for  encouraging  the  adaptation 
of  goods  to  the  environment. The  main 
problem,  as  far  as  computers  and  other 
electronics  equipment  are  concerned,  is 
that environmentally harmful substances 
are used both in the products and during 
the manufacturing. Since it has not been 
possible  for  the  majority  of  electronics 
equipment to be recycled in a satisfacto-
ry way, most of these potentially damag-
ing substances sooner or later enter Na-
ture. There are also other characteristics 
of a computer, such as energy consump-
tion  levels,  that  are  important  f rom  the 
viewpoints  of  both  the  work  (internal) 
and  natural  (external)  environments. 
Since all methods of conventional elec-
tricity  generation  have  a  negative  effect 
on the environment (acidic and climate-
influencing emissions, radioactive waste, 
etc.), it is vital to conserve energy. Elec-
tronics equipment in offices consume an 
enormous  amount  of  energy  since  they 
are often left running continuously.
■
What does labeling involve?
This product meets the requirements 
for  international  and  environmental 
labeling  of  personal  computers.  The 
requirements  cover  a  wide  range  of  is-
sues, including: environment, ergonom-
ics,  usability,  emission  of  electrical  and 
magnetic  fields,  energy  consumption 
and  electrical  and  fire  safety.  The  envi-
ronmental demands concern restrictions 
on  the  presence  and  use  of  heavy  met-
als,  brominated  and  chlorinated  flame 
retardants,  CFCs  (f reons)  and  chlori-
nated solvents, among other things. The 
product  must  be  prepared  for  recycling 
and the manufacturer is obliged to have 
an  environmental  plan  which  must  be 
adhered  to  in  each  country  where  the 
company  implements  its  operational 
policy. The energy requirements include 
a demand that the computer and/or dis-
play,  after  a  certain  period  of  inactivity, 
shall reduce its power consumption to a 
lower  level  in  one  or  more  stages.  The 
length  of  time  to  reactivate  the  com-
puter  shall  be  reasonable  for  the  user. 
Labeled  products  must  meet  strict  en-
vironmental  demands,  for  example,  in 
respect  of  the  reduction  of  electric  and 
magnetic  fields,  physical  and  visual  er-
gonomics and good usability.
Environmental Requirements
Flame retardants
Flame  retardants  are  present  in 
printed circuit boards, cables, wires, cas-
ings  and  housings.  In  turn,  they  delay 
the  spread  of  fire.  Up  to  thirty  percent 
of  the  plastic  in  a  computer  casing  can 
■
■
consist  of  flame  retardant  substances. 
Most  flame  retardants  contain  bromine 
or  chloride  and  these  are  related  to  an-
other  group  of  environmental  toxins, 
PCBs,  which  are  suspected  to  give  rise 
to severe health effects, including repro-
ductive damage in fish-eating birds and 
mammals, due to the bio-accumulative* 
processes.  Flame  retardants  have  been 
found  in  human  blood  and  researchers 
fear  that  disturbances  in  fetus  develop-
ment  may  occur.  Plastic  components 
weighing more than 25 grams must not 
contain flame retardants with organical-
ly  bound  chlorine  and  bromine.  Flame 
retardants  are  allowed  in  the  printed 
circuit  boards  since  no  substitutes  are 
available.
Lead**
Lead  can  be  found  in  picture  tubes, 
display  screens,  solders  and  capacitors. 
Lead  damages  the  nervous  system  and 
in  higher  doses,  causes  lead  poisoning. 
Requirements  permit  the  inclusion  of 
lead  since  no  replacement  has  yet  been 
developed.
Cadmium**
Cadmium  is  present  in  recharge-
able  batteries  and  in  the  color-generat-
ing  layers  of  certain  computer  displays. 
Cadmium  damages  the  nervous  system 
and is toxic in high doses. Requirements 
state that batteries, the color-generating 
layers of display screens and the electri-
cal  or  electronics  components  must  not 
contain any cadmium.
Environmental Regulations
 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Environmental Regulations
Mercur y**
Mercury  is  sometimes  found  in 
batteries,  relays  and  switches,  Mercury 
damages the nervous system and is toxic 
in  high  doses.  Requirements  state  that 
batteries  may  not  contain  any  Mercury. 
It also demands that no mercury is pres-
ent in any of the electrical or electronics 
components associated with the display 
unit.
CFCs (freons)
CFCs  (f reons)  are  sometimes  used 
for washing printed circuit boards. CFCs 
break  down  ozone  and  thereby  dam-
age  the  ozone  layer  in  the  stratosphere, 
causing  increased  reception  on  Earth 
of  ultraviolet  light  with  consequent  in-
creased  risks  of  skin  cancer  (malignant 
melanoma).  The  relevant  requirement; 
Neither CFCs nor HCFCs may be used 
during the manufacturing and assembly 
of the product or its packaging.
*Bio-accumulative  is  defined  as  substances 
which accumulate within living organisms.
**Lead,  Cadmium  and  Mercury  are  heavy 
metals which are bio-accumulative.
This  symbol  on  the  product 
or on its packaging indicates 
that  this  product  must  not 
be  disposed  of  with  your 
other  household  waste.  Instead,  it  is 
your  responsibility  to  dispose  of  your 
waste  equipment  by  handing  it  over  to 
a  designed  collection  point  for  the  re-
cycling of waste electrical and electronic 
equipment.  The  separate  collection  and 
recycling of your waste equipment at the 
time  of  disposal  will  help  to  conserve 
natural resources and ensure that it is re-
cycled in a manner that protects human 
health  and  the  environment.  For  more 
information  about  where  you  can  drop 
off  your  waste  equipment  for  recycling, 
please contact your local city office, your 
household waste disposal service, or the 
shop where you purchased the product.
LaCie is strongly committed to envi-
ronmental protection and sees recycling 
as one of the company’s top priorities in 
trying  to  minimize  the  burden  placed 
on  the  environment.  We  are  engaged 
in  developing  environmentally  f riendly 
products,  and  always  strive  to  help  de-
fine and comply with the latest indepen-
dent standards f rom agencies.
Recycling programs information:
Sweden - http://www.el-retur.se
Germany - http://www.recyclingpartner.de/
Holland - http://www.mirec.nl/
Japan - http://www.diarcs.com/
Energy saving:
This  monitor  features  an  advanced 
energy saving capability. When a VESA 
Display  Power  Management  Signaling 
(DPMS)  Standard  signal  is  sent  to  the 
monitor, the Energy Saving mode is ac-
tivated. The monitor enters a single En-
ergy Saving mode.
Manufacturer’s Recycling and Energy Information
ModePower consumptionLED color
Normal operation46W (319), 50W (320/321)Blue
Energy saving modeLess than 1WAmber
Off modeLess than 1WN/A
 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Monitor Specifications
Monitor Specifications
319 LCD Monitor320 LCD Monitor321 LCD Monitor
Technology:S-IPSA-TW-IPSSA-SF T
Diagonal display:19.0” (48 cm)20.1” (51 cm)21.0” (53.3 cm)
Active Display:376.3 (H) x 301.1 ( V ) mm408 (H) x 306 ( V ) mm432 (H) x 324 ( V ) mm
Resolution:720 x 400 at 70 Hz to 85 Hz; 640 x 480 at 60 Hz to 85 Hz; 800 x 600 at 56 Hz to 85 Hz;
832 x 624 at 75 Hz; 1024 x 768 at 60 Hz to 85 Hz; 1152 x 864 at 70 Hz to 85 Hz;
1152 x 870 at 75 Hz; 1280 x 960 at 60 Hz; 1280 x 1024 at 60 Hz to 85 Hz (Optimal resolu-
tion for LaCie 319); 1200 x 1600 at 60 Hz; 1600 x 1200 at 60 Hz (Optimal resolution for 
LaCie 320 and 321, not supported for 319); some systems may not support all modes listed.
Pixel pitch:0.294 mm0.255 mm0.270 mm
Color depth:16,777,216
Gamma correction:12 bit
Luminance:270 cd/m2 (typical) 1280 cd/m2 (typical) 1250 cd/m2 (typical) 1
Contrast ratio:600:1 (typical)700:1 (typical)500:1 (typical)
Response time:Rise time + Fall time : 
18ms (typical)
Rise time + Fall time : 
16ms (typical)
Rise time + Fall time : 20ms 
(typical)
Viewing angles:178°
Connections:Mini D-sub 15 pin, DVI-I (analog or digital), DVI-D (digital)
Power consumption:46 W (typical) 50 W (typical) 50 W (typical) 
In power save mode< 1 W
Weight:6.3 kg7.0 kg8.2 kg
Weight with stand:9.0 kg9.7 kg10.9 kg
Box weight:13.4 kg14.2 kg16.3 kg
Box dimensions:(WxHxD) 508 x 600 x 321 mm(WxHxD) 558 x 641 x 325 mm(WxHxD) 620 x 685 x 370 mm
Ergonomy:Up/down: 30° to -5°; left/right: 170° to 170°; clockwise: 90°; height adjustment: 150 mm
Operating Temp.:5°C to 35°C/41°F to 95°F
Humidity:30% to 80%
Altitude:0 to 10,000 feet / 0 to 3,048 m
Storing Temp.:-10°C to 60°C / 14°F to 140°F
Storing Humidity:10% to 85%
Storing Altitude:0 to 40,000 feet / 0 to 12,192 m
Certifications:CE, FCC-B, TÜV-Ergonomie, TÜV-GS, TCO’03, EnergyStar, C-Tick, GOST-R, c-UL, 
UL, VCCI-B, VESA DDC 2B, DDC-CI
Warranty:US: 3-year limited; Europe: 3-year advance swap
1 Values for when the UNIFORMITY function is OFF.
 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Introduction
1. Introduction to Your LaCie 300 Series LCD Monitor
Thank  you  for  purchasing  the  LaCie  300  Series 
LCD  Monitor.    Designed  for  serious  graphics  profes-
sionals, these LCD monitors feature 12-bit gamma cor-
rection to meet the challenge of today’s color needs.
1.1. 300 Series Monitor Capabilities
IPS  (LaCie  319), A-TW-IPS  (LaCie  320)  and SA-
SF T-IPS  (LaCie  321)  panel  technologies  offer  the 
best available LCD color accuracy, with a good balance 
between Contrast, Brightness and Expansive Viewing 
Angles of 178°.
Improved	uniformity
: Each panel is individually test-
ed  at  the  factory  and  corrected  to  ensure  that  bright-
ness and chromaticity are uniform across the screen.
12-bit	gamma	 correction
:  An  embedded  Integrated 
Circuit  containing  12-bit  color  correction  tables  en-
ables true hardware calibration of the display.
LaCie	blue	eye	pro	 software	 included
: This complete 
yet easy-to-use calibration software offers professional 
grade  calibration  and  ICC  profiling  of  the  monitors 
on Mac OSX, Windows XP, 2000, and XP64.
Monitor	 easyHood	 included
:  The  black,  anti-reflec-
tive  velvet  material  that  lines  the  easyHood  reduces 
ambient  light  glare  and  ensures  document  colors  are 
accurately seen by the user. 
Ergonomic	 stand
 enabling Height- Swivel- Tilt- and 
Pivot- adjustments
Pivot	Pro	software	 for	Windows	 included
:  In  con-
junction  with  the  monitor  stand’s  mechanical  Pivot 
adjustment, this software allows the user to effectively 
rotate the desktop and work in Landscape mode. 
Portability	 handle	and	quick-release	 stand
  make 
your LaCie 300 Series Monitor easy to carry.
•
•
•
•
•
•
•
•
 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 
Introduction
1.2. Minimum System Requirements
Hardware Requirements■
DVI graphics board required for automatic hardware calibration•
1.3. Package Content
LaCie 300 Series LCD Monitor with tilt/
swivel/pivot/height adjustable stand
Power cord
Screws (to mount the monitor to a flexible arm)
Cable cover
Video signal cable (15-pin mini D-SUB male 
to DVI-A)
Video signal cable (DVI-D to DVI-D cable)
easyHood
LaCie Utilities CD-ROM (includes User 
Manual and blue eye pro calibration software)
Quick Install Guide
Pivot Pro Software
1
3
2
4
Your LaCie 300 Series LCD monitor should contain the following:
5
6
7
8
5
13
4
8
9
ImpOrTANT INfO: Please save your packaging.  In the event that the monitor should need to be repaired or 
serviced, it must be returned in its original packaging.
7
2
6
9
10
10
   
LaCie User ManualICC Profiles Included2006
LaCie 300 Series LCD Monitor Version 2.0
Manuel Utilisateur 
						

							
LaCie 300 Series LCD Monitor
User Manualpage 0
Installing Your LaCie Monitor
2. Installing Your LaCie 300 Series LCD Monitor
To  attach  the  LCD  monitor  to  your  system,  follow 
these instructions:
1. Turn off the power to your computer.
2.  For	the	PC	or	MAC	with	DVI	digital	output:
Connect the DVI signal cable to the connector of the 
display  card  in  your  system  (Figure  A).  Tighten  all 
screws.
For	the	PC	with	Analog	output:
Connect  the  15-pin  mini  D-SUB  to  DVI-A  signal 
cable to the connector of the display card in your sys-
tem (Figure B).
For	the	MAC:
Connect the Macintosh cable adapter to the comput-
er, then attach the 15-pin mini D-SUB signal cable to 
the Macintosh cable adapter (Figure C).
Figure AFigure BFigure C
Mac Cable Adaptor
(not included)
TeChNICAl  NOTe: Some Macintosh systems 
do not require a Macintosh cable adapter.