Kyocera KM 3060 User Manual

							Basic Operation 
OPERATION GUIDE3-65
3
Changing Registration
The following procedure is one example for replacing the registration of 
Density with Original Image in the Quick Setup Screen for copying.
1Press the System Menu key.
2Press [Copy], [Next] of Quick Setup Registration, and then [Change] of 
Original Image. Document 
BoxDocument 
Storage1: Zoom
2: Density
3: Scan Resolution
4: 2-sided/Book Original
5: Original Image
6: Color Selection• Zoom
•Density
• Scan Resolution
• 2-sided/Book Original
• Original Image
• Color Selection
•Original Size
•Storing Size
• Original Orientation
Sending 
From Box1: File Format
2: Delete after Transmitted• File Format
• Delete after Transmitted
Printing
From Box1: Paper Selection
2: Delete after Printed
3: Staple
4: Duplex
5: Collate/Offset• Paper Selection
• Delete after Printed
•Staple
•Duplex
• Collate/Offset Function Default RegistrationFunctions Available for 
Registration
Status10/10/2007    10:1 0
Original
Zoom
Paper100 %
-- - :
:
:-- -
Image
Quality
Ready to copy .
Set Original.Copies
Copy Image
Org./Paper /
Finis hing Quick Setup Layout /Edit Advanced
Set up
1
Normal 0 Letter
Zoom Dens i t y Paper
Selection
1- s i ded
>>1-sidedText+Photo Collate
Duplex Original
ImageCollate/
Offset Auto
Pl ai n
Pr ev i ewInterrupt
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Operation 
3-66OPERATION GUIDE
3Press [Key 4] here 
as the key to set 
replacement 
location.
4Press [OK]. The Original Image Quality function will be newly registered.
Status 10/10/2007    10:10
Key 1
Cancel OK
Off
Key 2 Key 3
Key 4 Key 5Key 6
C opy  - O r i gi nal  I m age
Register Original  Image function  on  the Quick  Setup  screen.
Downloaded From ManualsPrinter.com Manuals 
						

							OPERATION GUIDE4-1
4 Optional Equipment
This chapter introduces the optional equipment available for 
the machine.
• Overview of Optional Equipment.................................. 4-2
• Document Processor .................................................... 4-4
• Paper Feeder ............................................................... 4-4
• Built-in Finisher............................................................. 4-5
• Document Finisher ....................................................... 4-9
• Job Separator ............................................................... 4-9
• Key Counter ................................................................4-11
• FAX Kit ........................................................................4-11
• Data Backup Kit.......................................................... 4-12
• Security Kit (USB Key)............................................... 4-12
• PDF Upgrade Kit (USB Key) ...................................... 4-12
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-2OPERATION GUIDE
Overview of Optional Equipment
The following optional equipment is available for the machine.
Document Processor
Paper FeederJob Separator Built-in Finisher
Document Finisher
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
OPERATION GUIDE4-3
4
Data Backup Kit Key Counter
FAX Kit PDF Upgrade KitSecurity Kit
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-4OPERATION GUIDE
Document Processor
Automatically scans originals. Also you can perform duplex copying and 
split copying.
For document processor operation, refer to Loading Originals in the 
Document Processor on page 2-49.
Paper Feeder
Two additional cassettes identical to the printer’s double cassettes can be 
installed in the printer. Paper capacity and loading method are the same 
as Cassettes 1 and 2. Refer to Loading Paper in the Cassettes on page 2-
35.
NOTE: Left cover 3 is located on the left side of the paper feeder for use 
in clearing paper jams.
Downloaded From ManualsPrinter.com Manuals 
						

							
Optional Equipment 
OPERATION GUIDE4-5
4
Built-in Finisher
The built-in finisher holds a large quantity of finished prints. The finisher 
offers a convenient means of sorting. Sorted finished prints may also be 
stapled.
1Ejected paper guide 
extension
2Ejected paper guide 1
3Ejected paper guide 2
4Finisher Tray
5Process Table
6Finisher tray extension
NOTE: 
• Sorted copies are  delivered onto the finisher 
tray.
• Adjust the finisher tray  extension to match the 
paper size.
• The paper sizes are  marked on the finisher tray 
extension. Open ejected 
paper guides 1 and 2 as 
necessary to match the 
paper size.
124
3 6
5
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-6OPERATION GUIDE • When stapling 11 × 17, 5 
1/2 × 8 1/2, A3 or B4 
paper, open the finisher 
tray extension to ensure 
that the paper does not fall 
out of the tray.
Adding Staples
1Pull to open the stapler front 
cover.
2Pull out the staple holder.
3Remove the empty staple case 
from the staple holder.
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
OPERATION GUIDE4-7
4
4Holding the staple holder in 
your left hand and a new 
staple case in your right hand, 
insert the staple case into the 
staple holder in the direction of 
the arrow.
5Insert the staple case fully as 
far as it will go. Pull to remove 
the paper tape wound on the 
staple case.
6Insert the staple holder into the 
slot of the staple unit again. 
When fully inserted, the staple 
holder locks with a clicking 
sound.
Clearing Staple Jams
1Pull out the staple holder referring to steps 1 and 2 of Adding Staples.
2Holding the knob A on the face 
plate of the staple holder, lift 
the face plate.
A
Downloaded From ManualsPrinter.com Manuals 
						

							Optional Equipment 
4-8OPERATION GUIDE
3Clear the staple jammed in the 
cartridge end (staple-loaded 
side).
4Lower the face plate of the 
staple holder.
5Insert the face plate back in place. When fully inserted, the face plate locks 
with a clicking sound.
6After lifting the staple unit slightly, lower it and insert it again into its place.
7Close the stapler front cover.
Downloaded From ManualsPrinter.com Manuals