Kyocera KM 3050 User Manual

Preparation before Use 
OPERATION GUIDE2-31
NOTE: If you use special paper such as letterheads, paper with holes or 
paper with pre-prints like logo or company name.
Loading Paper in the Cassettes
Up to 500 sheets of standard paper (80 g/m2) or colored paper may be 
loaded in each of the standard two drawers of cassettes.
The following paper sizes are supported: Ledger, Legal, Oficio II, 
8.5×13.5, Letter, Letter-R, Statement-R, A3, B4, A4, A4-R, B5-R, A5-R, 
Folio, 8K, 16K, and 16K-R.
1Pull the cassette...

Preparation before Use 
2-32OPERATION GUIDE
3Using the paper length 
adjusting tab, move the plate 
to fit the paper.
4Align the paper flush against 
the left side of the cassette.
IMPORTANT: 
• Before loading the paper, be sure that it is not curled or folded. Paper 
that is curled or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicated (see 
illustration below).
• When loading the paper, keep the side toward the sealed side facing 
up.
• Paper length and width...

Preparation before Use 
OPERATION GUIDE2-33
5Insert the appropriate paper 
size card in the slot to indicate 
the size of the paper inside.
6Gently push the cassette back in.
NOTE: If the machine will not be used for a prolonged period, protect all 
paper from humidity by removing it from the cassettes and sealing it in the 
original package.
7Select the type of the paper (plain, recycled, etc.) loaded in the cassette. 
(Refer to Selecting Paper Size and Type to the Cassettes on page 2-36).
Loading Paper...

Preparation before Use 
2-34OPERATION GUIDE
1Open the Multi Purpose Tray.
2Adjust the paper width guides 
to the width of the paper.
3Insert the paper along the 
paper width guides into the 
tray until it stops.
IMPORTANT: Keep the side toward the sealed side facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
Loading Envelopes
Up to 20 envelopes may be loaded in the Multi Purpose Tray.
Acceptable envelope sizes are as follows.
Acceptable Envelope Size
Monarch 3...

Preparation before Use 
OPERATION GUIDE2-35
1Open the Multi Purpose Tray.
2Adjust the paper width guides 
to the width of the envelope.
3In the case of the landscape form envelope, close the flap. Insert the 
envelope all the way along the width guides, keeping the printing side face-
up and with the flap positioned backward.
In the case of the portrait form envelope, open the flap. Insert the envelope 
all the way along the width guides, keeping the printing side face-up and 
with the flap positioned...

Preparation before Use 
2-36OPERATION GUIDE
IMPORTANT: How to load envelope (orientation and facing) will differ 
depending on the type of envelope. Be sure to load it in a correct way. 
Otherwise printing may be done in wrong direction or on wrong face.
NOTE: When you load envelope in the Multi Purpose Tray, select the 
envelope type by referring to Selecting Paper Size and Type to the Multi 
Purpose Tray on page 2-38.
Selecting Paper Size and Type
Selecting Paper Size and Type to the Cassettes
When you...

Preparation before Use 
OPERATION GUIDE2-37
1Press the System Menu key.
2Press [Common Settings], [Change] of Original/Paper Setup, [Change] of 
Cassette setting, [Change] of the required paper source and then [Change] 
of Paper Size.
3For automatic 
detection of the 
paper size, press 
[Auto] and select 
[Metric] or [Inch] as 
the unit.
To select the paper 
size, press 
[Standard Sizes 1] 
or [Standard Sizes 
2] and select the 
paper size.
4Press [OK].
5Press [Change] of Media Type and select the media...

Preparation before Use 
2-38OPERATION GUIDE Selecting Paper Size and Type to the Multi Purpose Tray
Select the paper size and media type when using the Multi Purpose Tray. 
You may select in advance the paper size and media type that will be used 
often.
Item Description
Paper 
SizeAuto Paper size is automatically detected and 
selected. Select whether the paper is in Metric 
size or in Inch size.
Standard 
Size 1Select from the standard sizes. Selectable paper 
sizes are as follows.
Inch size: Ledger,...

Preparation before Use 
OPERATION GUIDE2-39
1Press the System Menu key.
2Press [Common Settings], [Change] of Original/Paper Setup, [Change] of 
MP Tray Setting, and then [Change] of Paper Size.
3For automatic detection of the paper size, press [Auto] and select [Metric] 
or [Inch] as the unit.
To select the paper 
size, press any of 
[Standard Sizes 1], 
[Standard Sizes 2], 
[Others] or [Size 
Entry] and select the 
paper size.
If you have chosen 
[Size Entry], press 
[+] or [–] to enter X 
(horizontal)...

Preparation before Use 
2-40OPERATION GUIDE
Loading Originals
Follow the steps below to load originals for copying, sending or storing.
Placing Originals on the Platen
You may place book or magazine on the platen in addition to ordinary 
sheet originals.
1Open the original cover.
NOTE: If the optional document processor is installed, open the 
document processor. Before opening the document processor, be sure 
that there are no originals left on the original table or on the original eject 
table....