Kyocera KM 2035 User Manual
Here you can view all the pages of manual Kyocera KM 2035 User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 11
OPERATION GUIDEix INSTALLATION PRECAUTIONS Environment Caution Avoid placing the copier on or in locations which are unstable or not level. Such locations may cause the copier to fall down or fall over. This type of situation presents a danger of personal injury or damage to the copier. Avoid locations with humidity or dust and dirt. If dust or dirt become attached to the power plug, clean the plug to avoid the danger of fire or electrical shock. Avoid locations near radiators, heaters, or other...
Page 12
xOPERATION GUIDE • Avoid locations with drastic temperature fluctuations. • Avoid locations with direct exposure to hot or cold air. • Avoid poorly ventilated locations. If the floor is delicate, when this product is moved after installation, the floor material may be damaged. During copying, some ozone is released, but the amount will not cause any ill effect to ones health. If, however, the copier is used over a long period of time in a poorly ventilated room or when making an extremely large...
Page 13
OPERATION GUIDExi PRECAUTIONS FOR USE Cautions when using the copier Warning DO NOT place metallic objects or containers with water (flower vases, flower pots, cups, etc.) on or near the copier. This type of situation presents a danger of fire or electrical shock should they fall inside. DO NOT remove any of the covers from the copier as there is a danger of electrical shock from high voltage parts inside the copier. DO NOT damage, break or attempt to repair the power cord. DO NOT place heavy...
Page 14
xiiOPERATION GUIDE Caution DO NOT pull the power cord when removing it from the outlet. Pulling on the power cord may break the wires and start a fire or cause an electrical shock. (ALWAYS grasp the power plug when removing the power cord from the outlet.) ALWAYS remove the power plug from the outlet when moving the copier. If the power cord is damaged, there is a danger of fire or electrical shock. If the copier will not be used for a short period of time (overnight, etc.), turn the power switch...
Page 15
OPERATION GUIDExiii Do not look directly at the light from the scanning lamp. Doing so may cause pain in the eyes or eyestrain. Cautions when handling consumables Caution DO NOT attempt to incinerate the toner containers or the waste toner box. Dangerous sparks may cause burns. Keep the toner containers and the waste toner box out of the reach of children. If toner happens to spill from the toner container or the waste toner box, avoid inhalation or ingestion, as well as contact with your eyes and...
Page 16
xivOPERATION GUIDE Laser Safety (Europe) Laser radiation could be hazardous to the human body. For this reason, laser radiation emitted inside this machine is hermetically sealed within the protective housing and external cover. In the normal operation of the product by user, no radiation can leak from the machine. This machine is classified as Class 1 laser product under IEC 60825. CAUTION: Performance of procedures other than those specified in this manual may result in hazardous radiation...
Page 17
OPERATION GUIDExv Safety Instructions Regarding the Disconnection of Power (Europe) CAUTION: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. VORSICHT: Der Netzstecker ist die Hauptisoliervorrichtung! Die anderen Schalter auf dem Gerät sind nur Funktionsschalter und können nicht verwendet werden, um den Stromfluß im Gerät zu unterbrechen. DECLARATION OF CONFORMITY TO...
Page 18
xviOPERATION GUIDE Safety of Laser Beam (USA) 1. Safety of laser beam This copier has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape. 2. The CDRH Act A...
Page 19
OPERATION GUIDExvii 4. Maintenance For safety of the service personnel, follow the maintenance instructions in the other section of this manual. 5. Safety switch The power to the laser unit is cut off when the upper front cover is opened. Safety Instructions Regarding the Disconnection of Power CAUTION: The power plug is the main isolation device! Other switches on the equipment are only functional switches and are not suitable for isolating the equipment from the power source. AT T E N T I O N :...
Page 20
xviiiOPERATION GUIDE Warranty (USA) 1635/2035 COPIER LIMITED WARRANTY 1Kyocera Mita America, Inc. and Kyocera Mita Canada, Ltd. (both referred to as Kyocera) warrants the Customers new Multifunctional Product (referred to as MFP), and the new accessories installed with the initial installation of the MFP, against any defects in material and workmanship for a period of one (1) year, or 100,000 copies/prints from date of installation by an Authorized Kyocera Dealer for the 1635/2035, whichever first...