Kyocera FS C5350DN User Manual

Printing Operation 2-7
AppleTalk
This section explains the procedure for enabling AppleTalk. 
1Enter the administrator ID and password. Then, if AppleTalk is set 
to  Off, use U  or V to select On.
2Press  [OK]. A blinking question mark ( ?) appears.
3Press  [OK] again.
4Press  [MENU] . The display returns to Ready .
IPP
This section explains the procedure for enabling IPP. 
1Enter the administrator ID and password. Then, if  IPP is set to Off, 
use  U or  V to select On.
2Press  [OK]. A blinking...

2-8Printing Operation 
SSL Server
This section explains the procedure for enabling SSL Server.
1Enter the administrator ID and password. Then, if SSL Server is set 
to Off , use U  or V to select  On and press  [OK].
2Press  Z. Each time you press  U or  V, the selection changes.
3Display the item you want to set and press  [OK]. A blinking question 
mark ( ?) appears.
4Select  On or  Off  using  U or  V.
5Press  [OK].
6Press  [MENU] . The display returns to  Ready.
IPSec
This section explains the...

Printing Operation 2-9
Security Level
Security Level is primarily a menu used by service personnel for 
maintenance work. There is no need for customers to use this menu.>Security Level
  High
Downloaded From ManualsPrinter.com Manuals 

2-10Printing Operation 
Printing a Network Interface Status Page
You can print out a status page for the network interface. The network 
status page shows the network addresses, and other information under 
various network protocols about the network interface.
Adjust/Maintenance
Adjust/Maintenance is used to adjust the print quality and to carry out 
printer maintenance.
The options available in Adjust/Maintenance are as follows:
• Color Calibration
• Registration Normal
• Registration Details
• Restart...

Printing Operation 2-11
Installing the Printer Driver
Ensure the printer is plugged in and connected to the PC before installing 
the printer driver from the CD-ROM.
Installing the Software in Windows
If you are connecting this printer to a Windows PC, follow the next steps 
to install the printer driver. The example shows you how to connect your 
printer to a Windows Vista PC.
You can use either Express Mode or Custom Mode to install the software. 
Express Mode automatically detects connected printers...

2-12Printing Operation 
Express Mode
In Express Mode, the installer automatically detects the printer when it is 
turned on. Use Express Mode for standard connection methods.
1In the installation method selection window, select Express Mode. 
The print system detection window appears and the installer detects 
the connected printers. If the installer does not detect a print system, 
check that the print system is connected via USB or a network and 
that it is turned on. Then return to the print system...

Printing Operation 2-13
Custom Mode 
Use Custom Mode if you want to specify the printer port and select the 
software to be installed.
For example, if you do not want fonts installed on your computer to be 
replaced, select Custom Mode and deselect the Fonts  checkbox in the 
installation window.
1Select  Custom Mode.
2Following the instructions in the install wizard window, select the 
software packages to be installed and the specify the port, etc.
For details, refer to  Custom Installation in the...

2-14Printing Operation 
6The printer driver installation program starts up.
7Choose Select Destination, Installation Type and then install the 
printer driver as directed by the instructions in the installation 
software.
IMPORTANT   In the Authenticate screen, enter the name and 
password used to log in to the operating system.
This completes the printer driver installation. Next, specify the print 
settings.
If an IP or AppleTalk connection is used, the settings below are 
required. If a USB connection...

Printing Operation 2-15
10Click the IP icon for an IP connection or the AppleTalk icon for an 
AppleTalk connection and then enter the IP address and printer 
name.
11Select the installed printer driver and click Add.
12Select the options available for the printer and click  Continue.
Downloaded From ManualsPrinter.com Manuals 

2-16Printing Operation 
13The selected printer is added. This completes the printer setup 
procedure.
Downloaded From ManualsPrinter.com Manuals