Kyocera FS 2020DN User Manual

							
9-2Computer Interface
General Information
This chapter explains the connector specifications of parallel, USB, and 
network interfaces.
Parallel Interface
The printer provides high-speed data transmission on a parallel 
interface.
USB Interface
This printer supports the Hi-Speed USB. USB (Universal Serial Bus) 
interface specifications are as follows.
Specifications
Basic specification
Complies with the Universal Serial Bus Specification Revision 2.0.
Connectors
Printer: B-type receptacle (female) with upstream port
Cable: B-type plug (male)
Cable
Use a shielded cable that complies with USB 2.0 (Hi-Speed USB) and 
not longer than 5 meters (16 feet).
Transfer Mode
High speed (480 Mbps maximum)
Full-Speed (12 Mbps maximum)
Power Control
Self-power device
Interface Signals
USB Connector Pin Assignment
Note Use a parallel interface cable that complies with the IEEE 
1284 standard.
Pin Signal Description
1 Vbus Power supply (+5 V)
2 D- Data transmission 
3 D+ Data transmission 
4 GND Signal ground
Shell — Shield
Downloaded From ManualsPrinter.com Manuals 
						

							
Computer Interface9-3
Network Interface
Features
Automatic IP address resolution
This feature is compatible with the DHCP/DHCPv6 protocol and allows 
the printer to automatically receive IP addresses from the 
DHCP/DHCPv6 server. 
Management using Web browsers
HTTP pages are incorporated in to the interface, so that a web browser 
can be used to monitor and change a range of settings. The settings can 
be password-protected.
Support for a range of protocols
The SMTP, POP3, SSL, SNMP, IPv6 and Notables over TCP/IP 
protocols are supported for easier printer management and more robust 
security.
Support for IEEE 802.1x
The interface supports EAP- TLS and PEAP authentication.
Supports IPv6
Supports IPv6, which is based on IPv4 with improvements, such as 
increased manageable address space, additional security functions and 
priority based data transmission.
Supports IPSec
Supports IPSec, the security protocol that authenticates and encrypts in 
the network layer (IP layer).
Specifications
Connector
10 Base-T/100 Base-TX
Operating Systems
Windows 2000/XP/Vista/Server2003, MacOS 10.x
Network protocols
•IPv6: HTTP, LPD, FTP, IPP, RawPort, ICMPv6, LLTD, SNTP, 
DHCPv6, SMTP, POP3, DNS, SNMPv1/v2c/v3, WSD
• IPv4: HTTP, HTTPS, LPD, FTP, IPP, RawPort, ICMP, DHCP, SMTP, 
POP3, SNTP, DNS, WINS, NetBIOS over TCP/IP, SNMPv1/v2c/v3, 
Apple Bonjour Compatible, IPPS, LLTD, WSD
• Etc.: IPX/SPX, NetWare (NDS/B indery), AppleTalk, NetBEUI
Security Protocols
SSL/TLS (HTTPS, IPPS), SNMPv3, EAP-TLS, PEAP, AH, ESP
Operation Environment
10 to 35 °C (50 to 95 °F), 20-80% RH (condensation-free)
Downloaded From ManualsPrinter.com Manuals 
						

							
9-4Computer Interface
EMI Countermeasures
VCCI Class B, FCC Class B (U.S.), CE (Europe)
IMPORTANTWhen IPv6 functions are used, the devices used on the 
network (routers, PCs, etc) must support IPv6.
Downloaded From ManualsPrinter.com Manuals 
						

							
Appendix10-1
10 Appendix
This section lists the following information of this printer. 
Specifications 10-2
Environmental Standard Requirements 10-4
Downloaded From ManualsPrinter.com Manuals 
						

							
10-2Appendix
Specifications
NoteThese specifications are subject to change without notice.
Item Description
FS-2020D FS-3920DN FS-4020DN
Type Desktop
Printing Method Semiconductor laser and electrophotography
Paper Weight Cassette 60 to 120 g/m² MP Tray 60 to 220 g/m²
Paper Type Cassette Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color (Colour),  Prepunched, High Quality, and Custom (1 to 8) 
MP Tray/Manual 
Feed Plain, Transparency, Preprinted, Labels, Bond, Recycled, Rough, Vellum, 
Letterhead, Color (Colour), Prepunched, Envelope, Cardstock, Thick paper, 
High Quality, and Custom (1 to 8)
Paper Size Cassette A4, A5, JIS B5, Letter,  Legal, Folio, Oficio II, 
Statement, ISO B5, 
Envelope C5, Executive, 
16 kai, Custom (140 × 
210 to 216 × 356mm)A4, A5, JIS B5, A6, Letter, Legal, Folio, Oficio II, 
Statement, ISO B5, Envelope C5, Executive, 16 kai, 
Custom (105 × 148 to 216 × 356mm)
MP Tray A4, JIS B5, A5, Folio, Legal, Letter, Oficio II, Statement, Executive, A6, JIS B6,  ISO B5, Envelope C5, Envelope #10, Envelope #9, Envelope #6, Envelope 
Monarch, Envelope DL, Hagaki, Ofuku-Hagaki, 16K, Yokei 2, Yokei 4, Custom 
(70 × 148 to 216 × 356mm)
Magnification ratio 25 to 400%, 1% increments
Printing Speed Simplex A6: 21 ppm
*A6: 22 ppm A6: 23 ppm
A5: 21 ppm A5: 22 ppm A5: 23 ppm
A4: 35 ppm A4: 40 ppm A4: 45 ppm
Letter: 37 ppm Letter: 42 ppm Letter: 47 ppm
Legal: 28 ppm Legal: 33 ppm Legal: 38 ppm
Duplex A4: 17.5 ppm A4: 24.5 ppm A4: 32.5 ppm Letter: 18.5 ppm Letter: 26 ppm Letter: 34 ppm
First Print Time (A4, feed from 
Cassette) 9 seconds or less 10.5 seconds or less 10.5 seconds or less
Warm-up Time 
(22°C/71.6°F, 
60%RH) Power on 17 seconds or less 17 seconds or less 17 seconds or less
Sleep 15.5 seconds or less 15 seconds or less 15 seconds or less
Paper Capacity Cassette 500 sheets (80 g/m²) MP Tray 100 sheets (80 g/m²)
Output Tray 
Capacity Top Tray 250 sheets (80 g/m²) 500 sheets (80 g/m²)
Face-up Tray - PT-310: 250 sheets (80 g/m²)
Continuous printing 1 to 999 sheets
Resolution Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 dpi
Downloaded From ManualsPrinter.com Manuals 
						

							
Appendix10-3
Operating 
EnvironmentTemperature 10 to 32.5°C/50 to 90.5°F
Humidity 15 to 80 %
Altitude 2,500 m/8,202 ft maximum
Brightness 1,500 lux maximum
Controller PowerPC 440/533 MHz PowerPC 440/600 MHz PowerPC 440/667 MHz
Supported OS Windows 2000 Service Pack 2 or later, Windows Server 2003, Windows XP,  Windows Vista, Mac OS X 10.x
Interface
StandardParallel: 1 (IEEE1284)
Hi-Speed USB: 1
Full-speed USB: 1 (USB 
flash memory slot)
KUIO/W slot
Parallel: 1 (IEEE1284)
Hi-Speed USB: 1
Network: 1(10 BASE-T/100BASE-TX)
Full-speed USB: 1 (USB flash memory slot)
KUIO/W slot
Option
IB-31: 10/100BASE-TX--
PDL PRESCRIBE
Emulation PCL 6, KPDL, KPDL (AUTO), Line Printer, IBM Proprinter, DIABLO 630, 
EPSON LQ-850
Memory
Standard128MB
Maximum1152MB
Dimension (W x D x H) 382 × 394 × 285 mm
15 1/16 × 15 1/2 × 11 1/4 382 × 394 × 320 mm
15 1/16 × 15 1/2 × 12 5/8
Weight (without toner container) 16.2 kg/35.7 lb 16.8 kg/37 lb
Power Requirements 120 V AC, 60 Hz, 7.6 A/ 
220 to 240 V AC, 
50/60 Hz, 4.1 A 120 V AC, 60 Hz, 7.7 A/ 
220 to 240 V AC, 
50/60 Hz, 4.2 A
120 V AC, 60 Hz, 7.7 A/ 
220 to 240 V AC, 
50/60 Hz, 4.3 A
Power 
ConsumptionMaximum947 W (U.S.A./Canada), 
1004 W (European 
countries)964 W (U.S.A./Canada), 
1022 W (European 
countries)970 W (U.S.A./Canada), 
1029 W (European 
countries)
During printing583 W (U.S.A./Canada), 
560 W (European 
c

ountries) 658 W (U.S.A./Canada), 
641 W (European 
countries) 682 W (U.S.A./Canada), 
667 W (European 
countries)
During standby9.1 W (U.S.A./Canada), 
9.2 W (European
countries) when
EcoFuser is On.9.4 W (U.S.A./Canada), 
9.5 W (European 
countries) when 
EcoFuser is On.9.4 W (U.S.A./Canada), 
9.9 W (European 
countries) when 
EcoFuser is On.
69 W (U.S.A./Canada), 
68 W (European 
countries) when 
EcoFuser is Off. 76 W when EcoFuser is 
Off.
80 W (U.S.A./Canada), 
79 W (European 
countries) when 
EcoFuser is Off.
Sleep mode 5.5 W (U.S.A./Canada),
5.7 W (European 
countries) 5.5 W (U.S.A./Canada),
5.9 W (European
countries)6.3 W (U.S.A./Canada),
6.4 W (European
countries)
Power off 0 W
Item Description
FS-2020D FS-3920DN FS-4020DN
Downloaded From ManualsPrinter.com Manuals 
						

							
10-4Appendix
Environmental Standard Requirements
This machine conforms to the following environmental standard 
requirements.
•Time for switching to Sleep mode (default): 30 minutes
• Duplex Printing: Standard Equipment
• Durable paper for feeding: Paper made of 100% recycled paper 
Options Expanded memory, 
Paper Feeder (250-sheet 
x 1), Hard disk (HD-5A)Expanded memory, Paper Feeder (250-sheet x 3), 
Hard disk (HD-5A)
*. Only applicable to feeding from MP tray.
Item
Description
FS-2020D FS-3920DN FS-4020DN
NoteContact your Dealer or Service Representative for 
recommended paper types. 
Downloaded From ManualsPrinter.com Manuals 
						

							
11 - 1
Glossar y
Additional memory
An additional memory (optional) is used for increasing the memory 
capacity of this machine. For DIMM that can be used in this machine, 
contact your service technician.
AppleTalk
AppleTalk offers file sharing and printer sharing and it also enables you 
to utilize application software that is on another computer on the same 
AppleTalk network.
Default Gateway
This indicates the device, such as a computer or router, that serves as 
the entrance/exit (gateway) for accessing computers outside of the 
network that you are on. When no specific gateway is designated for a 
destination IP address, data is sent to the host that is designated as the 
Default Gateway.
DHCP (Dynamic Host Configuration Protocol)
This is a protocol that automatically resolves the IP address, Subnet 
Mask and Gateway address on a TCP/IP network. Use of DHCP 
minimizes the load of network administration, especially on network 
environments with a large number of client computers where it is not 
specifically necessary to assign a separate IP address to each client, 
including printers.
dpi (dots per inch)
This indicates the number of dots printed per inch (25.4mm) as a unit for 
expressing resolution.
EcoPrint
This is a printing mode that reduces toner consumption. Pages printed in 
the EcoPrint mode are lighter than pages printed in the normal mode.
Emulation
This refers to emulation of other manufacturers printers. The printer 
emulates operation of the following printers: PCL 6, KPDL, KPDL 
(AUTO), Line Printer, IBM Proprinter, DIABLO 630 and EPSON LQ-850.
Form Feed Timeout
While data is being sent to a printer, some pauses may occur. At this 
time, the printer waits for the next data without making a page break. 
Form feed timeout is a function to wait only a preset amount of time 
before it executes an automatic page break. After the waiting period 
begins, once the designated amount of time is exceeded, the printer will 
automatically process the currently received data and print it out. If the 
machine has received no print data for the last page, the printer ends 
processing of that job without outputting paper.
Downloaded From ManualsPrinter.com Manuals 
						

							
11 - 2
IEEE1284
This is a standard used when connecting a printer to a computer, and 
was established by the Institute of Electrical and Electronic Engineers in 
1994.
IP Address (Internet Protocol Address)
The Internet Protocol address is a unique number that represents a 
specific computer in a network. The format of an IP Address is four 
numbers separated by dots, e.g. 192.168.110.171. Each number should 
be a decimal between 0 and 255.
KPDL
KPDL is Kyoceras implementation of the PostScript page description 
language Level3.
MP tray
This tray is used instead of the cassette when printing on envelopes, 
postcards, transparency sheets, and labels.
NetBEUI (NetBIOS Extended User Interface)
An enhanced version of the NetBIOS protocol, it enables the utilization 
of more advanced functions on small-scale networks than do other 
protocols such as TCP/IP, etc. 
Outline font
With outline fonts, character outlines are represented with numerical 
expressions and fonts can be enlarged or reduced in different ways by 
changing the numeric values of those expressions. Printing remains 
clear even if you enlarge fonts, since the characters are defined with 
outlines represented with numerical expressions. You can specify the 
font size in steps of 0.25 points up to 999.75 points.
Parallel interface
With this interface, data transfer between the printer and the computer 
takes place in 8-bit chunks. The printer can perform IEEE1284 
compatible bi-directional communications.
PostScript
This is a page description language developed by Adobe Systems, Inc. It 
enables flexible font functions and highly-functional graphics, allowing\
 
higher quality printing.
PPM (prints per minute)
This indicates the number of printouts made in one minute.
Printer driver
The printer driver makes it possible for you to print data created using 
application software. The printer driver for the printer is contained on the 
CD-ROM supplied with the printer. Install the printer driver on the 
computer connected to the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							
11 - 3
Sleep mode
This mode is provided to save power. It is activated when the machine is 
not used for a preset period of time. In this mode, power is reduced to 
the minimum. The default setting can be changed.
Status page
This lists machine conditions, such as the machines memory, the total 
number of prints and paper source settings. You can print the status 
page from the operation panel.
Subnet Mask
This is a 32-bit numerical value that defines which bits of the IP address 
specify the network address and which specify the host address.
TCP/IP (Transmission Control Protocol/Internet Protocol)
TCP/IP is a suite of protocols designed to define the way computers and 
other devices communicate with each other over a network.
USB (Universal Serial Bus)
An interface standard for low to middle speed serial interfaces. This 
printer supports Hi-Speed USB. The maximum transfer rate is 480 Mbps 
and the maximum cable length is 5 meters (16 feet).
Downloaded From ManualsPrinter.com Manuals