Kyocera FS 2020DN User Manual

							
7-84Using the Operation Panel
Downloaded From ManualsPrinter.com Manuals 
						

							
Option8-1
8Option
This chapter explains the options for this printer.
General Information 8-2
Expansion Memory Modules 8-3
Paper Feeder (PF-310) 8-5
CompactFlash (CF) Card 8-6
Other Options 8-8
Downloaded From ManualsPrinter.com Manuals 
						

							
8-2Option
General Information
The printers have the following options available to satisfy your printing 
requirements. For instructions on installing individual options, refer to the 
documentation included with the option. Some options are explained in 
the following sections. 
NoteInstall the memory module before installing the optional 
paper feeder (PF-310).
Envelope Feeder EF-310 (for 
FS-3920DN/FS-4020DN) Faceup Output Tray PT-310 
(for FS-3920DN/FS-4020DN)
Expansion Memory (DIMM 
64/128/256/512 MB)
Network Interface Card 
IB-31 (for FS-2020D) Hard Disk 
HD-5ACompactFlash
USB Flash Memory
Paper Feeder PF-310
FS-2020D x 1
FS-3920DN/FS-4020DN x 3
Bulk Paper Feeder PF-315
(for FS-3920DN/FS-4020DN)
Downloaded From ManualsPrinter.com Manuals 
						

							
Option8-3
Expansion Memory Modules
To expand the printer memory for more complex print jobs and faster 
print speed, you can plug in optional memory module (dual in line 
memory module) in the memory slot provided on the printer main 
controller board. You can select additional memory module from 128, 
256 or 512MB. The maximum memory size is 544MB.
Precautions for handling the memory module
To protect electronic parts, discharge static electricity from your body by 
touching a water pipe (faucet) or other large metal object before handling 
the memory module. Or, wear an antistatic wrist strap, if possible, when 
you install the memory module.
Always hold the main controller board or a memory module by its edges 
as shown below to avoid damaging electronic parts.
NoteThe expansion memory should only be installed by your 
service technician. We shall not be liable for any damages caused 
by improper installation of expansion memory.
Correct Incorrect
Downloaded From ManualsPrinter.com Manuals 
						

							
8-4Option
Installing the Memory Module
1
Turn off the printer and disconnect the power cord and printer cable.
2Remove the right cover.
3Remove the screw and open the inner cover.
4Remove the memory module from its package.
5Aligning the cutouts of the memory module with the matching keys of 
the socket, carefully plug the memory module into the memory 
socket until it clicks in place. Then, push down the memory module 
to secure.
6After you finish installing the memory module, secure the inner cover 
with screws removed in step 3, and close the right cover.
Removing a Memory Module
To remove a memory module, remove the right cover and the memory 
slot cover from the printer. Then, carefully push out the two socket 
clamps. Ease the memory module out of the socket to remove.
Verifying the expanded memory
To verify that the memory module is working properly, test it by printing a 
status page.
Downloaded From ManualsPrinter.com Manuals 
						

							
Option8-5
Paper Feeder (PF-310)
The PF-310 paper feeder allows you to add three (FS-2020D: one) more 
paper cassettes to the bottom of the printer for continuous feeding of a \
large volume of paper. Each paper cassette can hold up to 
approximately 500 sheets of ISO A4, ISO A5, JIS B5, letter, and legal 
size (80g/m
2) paper. This feeder is attached at the bottom of the printer 
as shown on below.
FS-2020D FS-3920DN/FS04020DN
Downloaded From ManualsPrinter.com Manuals 
						

							
8-6Option
CompactFlash (CF) Card
The printer is equipped with a slot for a CF card with the maximum size 
of 256MB. A CF card is useful for storing fonts, macros, and overlays.
1Turn off the printer and disconnect the power cord and printer cable.
2Remove the screws and the option interface slot cover.
3Install the CompactFlash card into the slot.
4Secure the option interface slot cover with screws removed in step 2.
CAUTION  Before inserting a CF card  in the printer, make 
sure that the printer is switched off.
Downloaded From ManualsPrinter.com Manuals 
						

							
Option8-7
PT-310 Faceup Output Tray (for FS-3920DN/FS-
4020DN)
Use the faceup output tray when you wish paper to be stacked with the 
printed side facing up (reverse order).
To install the faceup output tray, perform the following procedures:
1Install the paper stopper according to the size of paper to be used.
2Install the faceup output tray on the rear of the printer.
IB-31 Network Interface Cards (For FS-2020D)
Along with the standard for the network interface on the printer, the 
network interface card supports TCP/IP, IPX/SPX, NetBEUI and 
AppleTalk protocols, so that the printer can be used on network 
environments including Windows, Macintosh, UNIX, NetWare, etc. The 
network interface card must be installed in the option interface slot. For 
details, refer to IB-31 Installation Guide .
Downloaded From ManualsPrinter.com Manuals 
						

							
8-8Option
Other Options
PF-315 Bulk Paper Feeder (for FS-3920DN/FS-
4020DN)
Holds approximately 2,000 sheets of 76 to 216 mm x 148 to 305 mm size 
paper. This bulk paper feeder can be attached to the front of the printer 
after the MP tray has been removed.
EF-310 Envelope Feeder (for FS-3920DN/FS-4020DN)
Holds more envelopes at a time than the MP tray. This envelope feeder 
can be attached to the front of the printer after the MP tray has been 
removed.
HD-5A Hard Disk
If a hard disk is installed in the printer, received data can be rasterized 
and stored on this hard disk. This enables to use the Job Box functions. 
For details, refer to  Job Box on page7-19.
USB Flash Memory
See your dealer for purchasing information of this optional device that 
are best suited for use with this printer.
Downloaded From ManualsPrinter.com Manuals 
						

							
Computer Interface9-1
9 Computer Interface
This chapter contains explanations on the following topics:
General Information 9-2
Parallel Interface 9-2
USB Interface 9-2
Network Interface 9-3
Downloaded From ManualsPrinter.com Manuals