Kyocera FS 1320D User Manual

Connecting and Printing3-7
9Click the plus symbol (+) to add the installed printer driver.
10Click the IP icon for an IP connection and then enter the IP address 
and printer name.
When you click the AppleTalk icon for an AppleTalk connection, 
enter the printer name.
For a Bonjour connection, click the default icon and select the printer 
for which Bonjour appears in Connection.
11Select the installed printer driver and click Add.
12Select the options available for the printer and click  Continue....

3-8Connecting and Printing
13The selected printer is added. This completes the printer setup 
procedure.
Downloaded From ManualsPrinter.com Manuals 

Connecting and Printing3-9
Printing
This section explains the printing procedure from an application software. 
You can specify the printing settings from each tab on KX Driver. KX Driver is 
stored in the CD-ROM (Product Library). For more information, refer to the 
Printer Driver User Guide  in the CD-ROM.
About KX Driver
KX Driver consists of the following tabs.
Quick Print
Use this tab to define basic print options into group profiles that can be 
accessed quickly and easily.
Basic
Use this tab to...

3-10Connecting and Printing
Printing from Application Software
The steps required to print a document created with an application are 
explained below. You can select the printing paper size.
1Load the paper required into the paper cassette.
2From the application  File menu, select Print. The Print dialog box 
appears.
3Click the drop-down list of printer names. All the installed printers are 
listed. Click the name of the printer.
4Use Number of copies to enter the number of copies required. Up to 
999...

Connecting and Printing3-11
Screen Overview
The screen overview of the Status Monitor is as follows.
Pop-up window
If an information notification event occurs, a pop-up window appears. 
This window only appears when the 3D View is open on the desktop.
3D View
This shows the status of the monitored printer as a 3D image. You can 
choose whether to show or hide the 3D view from the menu displayed 
when you right-click the Status Monitor icon.
If an information notification event occurs, the 3D view and an...

3-12Connecting and Printing
Status Monitor Settings
The Status Monitor has two tabs to configure its settings. Use the 
Preference option to set up the Status Monitor.
Sound Notification Tab
The Event Notification tab contains the following items.
Enable Event Notification
Select to enable or disable monitoring the events in Available events.
Sound file
A sound file can be selected if you require an audible notification. Cli\
ck 
Browse to search for the sound file.
Use Text to speech
Select this check...

Connecting and Printing3-13
Appearance Tab
The Appearance tab is contains the following items.
Enlarge window
Doubles the size of the Status Monitor window.
Always on top
Positions the Status Monitor in front of other active windows.
Transparency
Displays the Status Monitor as a transparent window.
Downloaded From ManualsPrinter.com Manuals 

3-14Connecting and Printing
Configuration Tool
The Configuration Tool  allows you to check and/or change the settings 
for printers not included in the KX Driver. 
The Configuration Tool can be used for printers connected to the PC via 
a USB cable.
Accessing the Configuration Tool
Follow these steps to display the Configuration Tool on the desktop.
1Right-click the Status Monitor icon in the Windows taskbar.
2Select Configure the Printing System  from the menu. The 
Configuration Tool window appears....

Connecting and Printing3-15
Status Tab
The Status tab displays current information about the device, such as the 
model name, system firmware, engine firmware, serial number, total 
memory, and number of printed pages.
Input Tab
The Input tab displays information about the paper feeder attached to the 
machine, such as the current paper level and the maximum paper 
capacity.
Media Tab
The Media tab displays and lets you select the weight and density for 
each media type. It also enables or disables...

3-16Connecting and Printing
Printer Tab
The Printer tab allows you to set print processing parameters that are not 
available in the KX Driver. As well as the form feed timeout, you can 
change the memory size used for processing raster data such as bitmap 
and JPEG files.
Connection Tab
You can use the Connection tab to set the emulation. You can also use 
this tab to change the buffer memory size and buffer mode of the printer 
for communication processing to the host.
Data Tab
The Data tab fetches and...