Kyocera FS 1300DN User Manual
Here you can view all the pages of manual Kyocera FS 1300DN User Manual. The Kyocera manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 61
Connecting and Printing3-17 Others Tab The Others tab enables you to configure the printer settings shown below. Item Description Auto sleep Configures the amount of time when the printer automatically enters Sleep Mode. Click Advanced to turn Auto sleep On or Off. EcoFuser Enables or disables the EcoFuser. Select On to reduce the power consumption to a minimum by turning off the heater of the fixing unit at Sleep Mode. The default setting is On. Panel lock Locks or unlocks the operation...
Page 62
3-18Connecting and Printing Uninstalling Software The CD-ROM lets you remove the printer software. 1Click Remove Software . The Kyocera Uninstall er appears. 2Select the software package to remove. 3Click Uninstall . The uninstaller starts. 4When Uninstall complete screen appears, click Finish. 5Select whether you restart your computer or not, click Finish. NoteIn Windows Vista, Remove Driver and Package screen appears. Select Remove driver and driver package, and click OK. Downloaded From...
Page 63
Maintenance4-1 4 Maintenance This chapter explains how to replace the toner container and clean the printer . General Information 4-2 Toner Container Replacement 4-2 Cleaning the Printer 4-6 Prolonged Non-Use and Moving the Printer 4-9 Downloaded From ManualsPrinter.com Manuals
Page 64
4-2Maintenance General Information This chapter describes basic maintenance tasks you can perform for the printer. You can replace the toner container according to the printers status: Also, the internal parts need periodic cleaning. Toner Container Replacement The Toner indicator identifies the toner status at two stages of toner usage. • When the printer becomes low on toner, the Toner indicator flashes. Note the replacement is not always necessary at this stage. • If you ignore the above...
Page 65
Maintenance4-3 Replacing the Toner Container This section explains how to replace the toner container. 1Open the top cover. 2Turn lock lever to the unlock position. Push lock lever to the position marked arrow and pull out the toner container . CAUTION Do not attempt to incinerate the Toner Container. Dangerous sparks may cause burns. IMPORTANT During toner container replacement, temporarily move storage media and computer supplies (such as floppy disks) away from the toner container. This is to...
Page 66
4-4Maintenance 3Take the new toner container out of the toner kit. Shake the new toner container at least 5 times as shown in the figure in order to distribute the toner evenly inside the container. 4Remove the label from the toner container. 5Install the new toner container in the printer. Push firmly on the top of the container at the positions marked PUSH, until you hear a click. Downloaded From ManualsPrinter.com Manuals
Page 67
Maintenance4-5 6Turn lock lever to the lock position. 7Close the top cover . Downloaded From ManualsPrinter.com Manuals
Page 68
4-6Maintenance Cleaning the Printer To avoid print quality problems, the interior of the printer must be cleaned with every toner container replacement. 1Open the top cover and front cover . 2Lift the process unit together with the toner container out of the printer. 3Remove the drum unit from the printer by holding the green levers with both hands. Note The drum is sensitive to light. Never expose the drum unit to light for more than five minutes. Downloaded From ManualsPrinter.com Manuals
Page 69
Maintenance4-7 4Place the drum unit flat on a clean, level surface. 5Use a clean, lint free cloth to clean dust and dirt away from the metal registration roller . 6Slide the charger cleaner (green) back and forth 2 or 3 times to clean the charger wire , then return it to its original position (CLEANER HOME POSITION ). 7When cleaning is complete, return the drum unit to the original position. IMPORTANT Do not place the drum unit on end. IMPORTANTTake care not to touch the transfer roller (black)...
Page 70
4-8Maintenance 8Return the process unit to its position, aligning the guides at both ends with the slots in the printer. Then, close the front cover and top cover . Downloaded From ManualsPrinter.com Manuals