Kyocera FS 1128MFP User Manual

Default Setting (System Menu) 
OPERATION GUIDE8-143
8
6Press the OK key. Secure Protocol appears.
7Press the  U or  V key to select [LDAP Security].
8Press the  OK key. LDAP Security appears.
9Press the  U or V  key to select [Off], [LDAPv3/TLS] 
or [LDAP over SSL].
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
SNMPv3 Setting
Sets up SNMPv3. The default setting is Off . Use the procedure below.
Refer to  Protocol Detail on page 8-135  about the...

Default Setting (System Menu) 
8-144OPERATION GUIDE
IPSec Setting
Make this setting when you use IPSec. The default setting is On and that of Rule Setting is also  Off.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
2The System...

Default Setting (System Menu) 
OPERATION GUIDE8-145
8
If you select [On] and press the OK key, Rule 
Setting appears. Press the U  or V key to select 
[On] or [Off].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Network Setting menu.
Rule Setting:a  b 
*********************
2  On
1 *Off
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
8-146OPERATION GUIDE
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or 
optional interfaces. 
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The...

Default Setting (System Menu) 
OPERATION GUIDE8-147
8
6Press the OK key. USB Host appears.
7Press the  U or  V key to select [Unblock] or [Block].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the  I/F Block Set. menu.
USB Device (USB interface setting)
This locks and protects the USB interface connect or (B1) (USB Device). The default setting is Unblock.
Use the procedure below to specify the USB Device setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select...

Default Setting (System Menu) 
8-148OPERATION GUIDE
6Press the OK key. USB Device appears.
7Press the  U or  V key to select [Unblock] or [Block].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to  the System menu.
USB Device:a  b 
*********************
2  Block
1 *Unblock
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
OPERATION GUIDE8-149
8
Optional interface (Optional interface card setting)
This locks and protects the optional interf ace slots (OPT1). The default setting is Unblock.
Use the procedure below to specif y the optional interface setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [System].
2Press the  OK key. The System menu appears.
3Press the  U or  V key to select [I/F Block Set.].
4Press the  OK key. The I/F Block Set. menu 
appears.
5Press the  U...

Default Setting (System Menu) 
8-150OPERATION GUIDE
Security Level (Security Level setting)
The Security Level setting is primarily a menu option used by service personnel for maintenance work. There is 
no need for customers to use this menu.
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
OPERATION GUIDE8-151
8
Optional Functions
You can use the optional applications installed on this machine.
Op Functions
Although nothing is currently displayed, when the optional functions that will be released in the future is installed, 
the licenses can be set using this menu.
Downloaded From ManualsPrinter.com Manuals 

Default Setting (System Menu) 
8-152OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals