Konica Minolta magicolor 4750EN User Manual

Clearing Media Misfeeds 9-14
Clearing a Media Misfeed from the Fuser Unit
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 1.
2Open the eject cover.
3Lift up the 2 levers.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-15
4Open the fuser unit cover.
5Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 9-16
If the misfed media cannot 
be removed by pulling it 
down, pull it from the top of 
the fuser unit.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-17
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds 9-18
6Close the fuser unit cover.
7Push down the 2 levers.
8Close the eject cover. 
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-19
9Close the right side cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 9-20
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) 
and Transfer Roller
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 1.
2Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-21
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds 9-22
3Close the right side cover.
Downloaded From ManualsPrinter.com Manuals 

Solving Problems with Media Misfeeds9-23
Solving Problems with Media Misfeeds
Frequent misfeeds in any area indicate that area should be checked, 
repaired, or cleaned. Repeated misfeeds may also happen if you’re 
using unsupported print media.
Symptom Cause Solution
Several 
sheets go 
through the 
printer 
together.The front edges of 
the media are not 
even.Remove the media and even up the 
front edges, then reload it.
The media is moist 
from humidity.Remove the moist media and replace it 
with new,...