Konica Minolta magicolor 4750EN User Manual

Understanding the Media Path 9-4
Understanding the Media Path
Understanding the printer’s media path will help you locate media misfeeds
1 Toner cartridge 6 Tray 3 (optional lower feeder unit 
PF-P07)
2 Output tray 7 Tray 2
3 Fuser unit FU-P02 8 Print head unit
4 Duplex (magicolor 4750DN only) 9 Imaging unit
5 Tray 1 (Manual feed tray) 10 Transfer belt unit TF-P05
321
9 10
5
4
8
7
6
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-5
Clearing Media Misfeeds 
To avoid damage, always remove misfed media gently, without tearing it. Any 
piece of media left in the printer, whether large or small, can obstruct the 
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you 
touch the printed surface, the toner may stick to your hands, so be 
careful not to touch the printed face when removing the misfed media. 
Make sure...

Clearing Media Misfeeds 9-6
Media Misfeed Messages and Clearing Procedures
If the message PAPER JAM/VERTICAL TRANS appears, check 
for media misfeeds in the transfer roller section of the right side covers 
for Tray 3. Media Misfeed Message Page Reference
PAPER JAM
TRAY2page 9-7
PAPER JAM
TRAY3page 9-11
PAPER JAM 
DUPLEX1page 9-13
PAPER JAM
DUPLEX2page 9-13
PAPER JAM
FUSER/EXITpage 9-14
PAPER JAM
TRAY1page 9-20
PAPER JAM
SECOND TRANSpage 9-20
PAPER JAM
VERTICAL TRANSpage 9-11, page 9-20
Downloaded From...

Clearing Media Misfeeds9-7
Clearing a Media Misfeed in Tray 2
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 1.
2Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 9-8
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds9-9
3Close the right side cover.
4Pull out Tray 2, and then remove 
all media from the tray. 
5Fan the media you removed and 
then align it well.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 9-10
6Load the media face up in Tray 2.
Make sure that the media is flat.
Do not load paper above the  mark. 
7Close Tray 2.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-11
Clearing a Media Misfeed in Tray 3
1Open the right side cover of 
Tray 3.
Before opening the right 
side cover of Tray 3, fold 
up Tray 1.
2Carefully pull out the misfed 
media.
3Close the right side cover of 
Tray 3.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 9-12
4Pull out Tray 3, and then remove 
all paper from the tray.
5Fan the paper you removed and 
then align it well.
6Load the paper face up in Tray 3.
Make sure that the paper is flat.
Do not load paper above the  mark.
Slide the media guides against the edges of the paper.
7Close Tray 3.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds9-13
Clearing a Media Misfeed from the Duplex (magicolor 
4750DN only)
1Pull the lever, and then open the 
right side cover.
Before opening the right 
side cover, fold up Tray 1.
2Carefully pull out the misfed 
media.
3Close the right side cover.
Downloaded From ManualsPrinter.com Manuals