Konica Minolta magicolor 4650EN User Manual

Configuration Menu Overview 67
RGB 
SOURCESettingsDEVICE COLOR/sRGB
Specify the color space for RGB image data.
If 
DEVICE COLOR is selected, no color space is 
specified.
RGB 
INTENTSettingsVIVID/PHOTOGRAPHIC
Specify the characteristic applied when converting 
RGB image data to CMYK data.
If 
VIVID is selected, a vivid output is produced.
If 
PHOTOGRAPHIC is selected, a brighter output is 
produced.
RGB GRAYSettingsCOMPOSITE BLACK/BLACK AND 
GRAY/BLACK ONLY
Specify how black and grays are reproduced in...

Configuration Menu Overview 68
INTERFACE MENU
With this menu, interface settings can be specified.
Restart the printer after changing settings in the ETHERNET menu.
SUBNET MASK*
DEFAULT 
GATEWAY*
HTTP*
FTP*
TCP/IPENABLE
IP ADDRESS*
JOB TIMEOUT
ETHERNET
INTERFACE MENU
MEMORY 
DIRECT**
ARP/PING*
CAMERA 
DIRECT
TELNET*
BONJOUR*
DYNAMIC DNS*
IPP*
DHCP*
BOOTP*
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 69


*This menu item appears when INTERFACE MENU/ETHERNET/
TCP/IP/ENABLE
 is set to YES.
** This menu item appears only if an optional hard disk kit or a Com-
pactFlash card is installed.
SNMP*
WSD PRINT*
IPSEC*
ENABLE
ENABLE
SLP*
SMTP*
NETWARE
APPLETALK
SPEED/
DUPLEX
IP ADDRESS 
FILTER*
IEEE802.1X
IPv6*
ENABLE
RAW PORT*ENABLE
BIDIREC-
TIONAL
ENABLE
ENABLE
ENABLE
ENABLE
ENABLE
ACCESS PER-
MISSION
ACCESS 
REFUSE
ENABLE
LINK LOKAL
GLOBAL 
ADDRESS
AUTO 
SETTING
GATEWAY...

Configuration Menu Overview 70
All factory default values are shown in bold.
JOB 
TIME-
OUTSettings5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NETTCP/IP ENABLESettingsYES/NO
If YES is selected, TCP/IP is enabled.
If 
NO is selected, TCP/IP is disabled.
IP 
ADDRESSSetting000.000.000.000
Set the IP address for this printer on the 
network.
Use the  ,  ,  , and   keys to 
specify the value.
If the IP address is manually specified, 
DHCP/BOOTP is...

Configuration Menu Overview 71
BOOTPSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
ARP/
PINGSettingsON/OFF
Select whether or not the IP address is 
automatically acquired.
If 
ON is selected, the IP address is auto-
matically acquired.
If 
OFF is selected, the IP address is not 
automatically acquired.
HTTP ENABLESettingsYES/NO
If YES is...

Configuration Menu Overview 72
DYNAMIC 
DNSENABLESettingsYES/NO
If YES is selected, Dynamic 
DNS is enabled.
If 
NO is selected, Dynamic 
DNS is disabled.
IPP ENABLESettingsYES/NO
If YES is selected, IPP is 
enabled.
If 
NO is selected, IPP is dis-
abled.
RAW 
PORTENABLESettingsYES/NO
If YES is selected, Raw Port 
is enabled.
If 
NO is selected, Raw Port is 
disabled.
BIDI-
REC-
TIONALSettingsON/OFF
If ON is selected, Raw port 
transmissions are enabled.
If 
OFF is selected, Raw port 
transmissions are...

Configuration Menu Overview 73
WSD 
PRINTENABLESettingsYES/NO
If YES is selected, WSD print 
is enabled.
If 
NO is selected, WSD print is 
disabled.
IPSEC ENABLESettingsYES/NO
If YES is selected, IPsec is 
enabled.
If 
NO is selected, IPsec is dis-
abled.
IP 
ADDRESS 
FILTERACCESS 
PER-
MIS-
SIONSettingsENABLE/
DISABLED
Select whether to enable or 
disable access granting.
If 
ENABLE is selected, 
access granting is enabled.
If 
DISABLE is selected, 
access granting is disabled.
ACCESS...

Configuration Menu Overview 74
AUTO 
SET-
TINGSettingsYES/NO
If YES is selected, auto 
configuration of IPv6 is 
enabled.
If 
NO is selected, auto config-
uration of IPv6 is disabled.
LINK 
LOKALDisplays the Link-Local 
address.
GLOBAL
ADDRESSDisplays the global address.
GATE-
WAY 
ADDRESSDisplays the gateway 
address.
NETWARE ENABLESettingsYES/NO
If YES is selected, NetWare is enabled.
If 
NO is selected, NetWare is disabled.
APPLE
TALKENABLESettingsYES/NO
If YES is selected, AppleTalk is enabled.
If...

Configuration Menu Overview 75
CAMERA 
DIRECTSettingsENABLE/DISABLE
Select whether to enable or disable camera direct printing.
If 
ENABLE is selected, camera direct printing is enabled.
If 
DISABLE is selected, camera direct printing is disabled.
Downloaded From ManualsPrinter.com Manuals 

Configuration Menu Overview 76
SYS DEFAULT MENU
With this menu, settings can be specified to adjust the operation of the printer, 
such as the display language of the message window and the time until the 
machine enters Energy Saver mode.
LANGUAGE
EMULATIONDEF.
EMULATION
POSTSCRIPTWAIT 
TIMEOUT
PS ERROR 
PAGE
PS PROTOCOL
PCLCR/LF 
MAPPING
LINES PER 
PAGE
FONT SOURCEFONT NUMBER
PITCH SIZE
(POINT SIZE)
SYMBOL SET
PAPERDEFAULT 
PAPER
UNIT OF 
MEASURE
SYS DEFAULT MENU
PAPER SIZE
CUSTOM SIZE
PAPER TYPE...