Konica Minolta magicolor 4650DN User Manual

Status, Error, and Service Messages 207 Error Messages (Warning: )
“I-UNIT” in a message refers to the imaging unit.
REBOOTINGThe printer is being 
restarted.No action needed.
WARMING UPThe printer is warming up.
OFFLINEThe printer is offline. To print on a 
network, change 
the 
TELNET 
setting so it is 
online.
This message... means... do this...
FUSER UNIT
END OF LIFEThe fuser unit has 
reached the end of its 
life.Replace the fuser unit 
and reset the counter in 
the 
MAINTENACE 
MENU/SUPPLIES/...

Status, Error, and Service Messages 208
INCORRECT
I-UNIT XThe X imaging unit is 
an unapproved type.Install a KONICA 
MINOLTA imaging unit 
of the appropriate type 
(AM, EU, AP or GC). 
See page 135.
INCORRECT
TONER XThe X toner cartridge 
is an unapproved 
type.Install a 
KONICA MINOLTA 
toner cartridge of the 
appropriate type (AM, 
EU, AP or GC). See 
page 129.
MEMORY CARD
NEAR FULLThe CompactFlash 
card is nearly full.Delete resources (fonts, 
forms, etc.) which saved 
on the CompactFlash 
card by...

Status, Error, and Service Messages 209
I-UNIT LOW
XThe X imaging unit is 
low and should be 
replaced within 4,500 
pages at 5% cover-
age of letter/A4 
pages. 
(Appears when 
SYS 
DEFAULT MENU/
ENABLE WARN-
ING/I-UNIT LOW
 
is set to 
ON.)Prepare the specified 
color imaging unit.
I-UNIT LIFE
XThe X imaging unit 
has reached the end 
of its life.Replace the imaging 
unit. Printing continues 
until the message 
I-UNIT END appears.
TONER OUT
XThe X toner cartridge 
is empty.Replace the toner car-...

Status, Error, and Service Messages 210
UNABLE TO 
COLLATE JOBThe hard disk is full. 
Print jobs over 10,000 
pages cannot be col-
lated.Print one copy of the file 
at a time.
WASTE TONER 
NEAR FULLThe waste toner bot-
tle is nearly full.Prepare a new waste 
toner bottle.
HUBS
NOT SUPPORTEDA USB hub is con-
nected.Do not connect a USB 
hub.
DEVICE
NOT SUPPORTEDAn incompatible 
device is connected.Do not connect an 
incompatible device. This message... means... do this...
Downloaded From...

Status, Error, and Service Messages 211 Error Messages (Operator Call: )
This message... means... do this...
COVER OPEN 
FRONT COVERThe printer’s front 
cover is open.Close the front cover.
COVER OPEN 
SIDE COVERThe printer’s right 
side cover is open.Close the right side 
cover.
COVER OPEN
TRAY3 COVERThe right side cover 
of Tray 3 is open.Close the right side 
cover of the tray.
HOLD JOB ERROR
UNABLE TO 
STORE JOBThe specified print job 
saved on the hard 
disk is sent while the 
hard disk is not...

Status, Error, and Service Messages 212
OUTPUT FULL 
REMOVE PAPERThe output tray is full 
of media.
This message 
appears only on mag-
icolor 4650DN.Remove all media from 
the output tray.
PAPER EMPTY
“SIZE”
“MEDIA”The specified tray is 
empty. (Appears 
when 
PAPER 
MENU/PAPER 
SOURCE/TRAY 
CHAINING ON
 is 
set.)Load the correct media 
into the specified tray.
PAPER ERROR
“SIZE”
“MEDIA”The media size/type 
set in the printer 
driver is different from 
the size/type of media 
loaded (Appears 
when 
PAPER...

Status, Error, and Service Messages 213
PAPER JAM
DUPLEX1Media has misfed in 
the duplex.Press the   key to dis-
play the help screen. 
Follow the instructions in 
the help screen to 
remove the misfed 
media.
PAPER JAM
DUPLEX2Media has misfed in 
the duplex.
PAPER JAM
FUSER/EXITMedia has misfed 
leaving the fuser 
area.
PAPER JAM
SECOND TRANSMedia has misfed in 
the transfer roller 
area. This type of 
misfeed means that 
the media did not 
make it to the media 
exit area.
PAPER JAM
TRAY1Media has...

Status, Error, and Service Messages 214
I-UNIT END
REPLACE
XThe X Imaging unit 
has completely 
reached the end of its 
life.Replace the Imaging 
unit.
I-UNIT MISSING
CHECK XThe X imaging unit is 
not installed, or an 
unapproved imaging 
unit is installed.Install a correct KONICA 
MINOLTA imaging unit.
TONER OUT
REPLACE XThe X toner cartridge 
is completely empty.Replace the toner car-
tridge.
TONER MISSING
CHECK XThe X toner cartridge 
is not installed, or an 
unapproved toner 
cartridge is...

Status, Error, and Service Messages 215
TRAYX TYPE ERR
ADD
“MEDIA”The media type set in 
the printer driver is 
different from the type 
of media loaded.Load the correct media 
type into the specified 
tray.
WASTE TONER FULL
REPLACE BOTTLEThe waste toner 
bottle is full.Install a new waste toner 
bottle.
CONFIGURATION ERRThe printer configura-
tion was changed 
when the printer 
power was on.Reboot the printer
INCORRECT
TONER XThe X toner cartridge 
is an unapproved 
type.Install a KONICAMI-
NOLTA toner...

Status, Error, and Service Messages 216
Service Messages:
These messages indicate a more serious error that can only be corrected by 
a customer service engineer. If one of these messages appears, turn the 
printer off, then turn it on again. If the problem persists, contact your local 
vendor or authorized service provider.  
This service 
message...means... do this...
SERVICE CALL XXXX
“Error”An error has been 
detected with the item 
indicated “XXXX” in the 
service message.
Information about errors...