Konica Minolta magicolor 4650DN User Manual

Media Types 107
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„Approved for laser printing
DO NOT use transparencies that
„Have static electricity that will cause them to stick together
„Are specified for inkjet printers only
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that 
the image does not shift. 
DO NOT use glossy media stock that is
„Mixed with any other media in Tray 1 (as this will cause printer...

Media Types 108
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is 
up to 4.2 mm (0.165) from the edges 
of the media.
Each media size has a specific image-
able area, the maximum area on which 
the printer can print clearly and without 
distortion. 
This area is subject to both hardware 
limits (the physical media size and the 
margins required by the printer) and 
software constraints (the amount of 
memory available for the full-page frame buffer). The...

Loading Media 109
Loading Media 
How do I load media?
Take off the top and bottom sheets of a 
ream of paper. Holding a stack of approx-
imately 100 sheets at a time, fan the 
stack to prevent static buildup before 
inserting it in a tray.
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of 
media types, it is not intended to print exclusively on a single media 
type except plain paper. Continuous printing on media other than plain 
paper (such as...

Loading Media 110
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the paper face down in the 
tray.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 111
Do not load so much 
paper that the top of the 
stack is higher than the 
maximum limit guide. Up 
to 100 sheets (80 g/m
2 
[22 lb]) of plain paper can 
be loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the paper.
6Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of paper that are loaded. See also “PAPER MENU” on 
page 37.
Other Media
When loading media other...

Loading Media 112
Loading Envelopes
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 113
4Load the envelopes flap side up 
in the tray. 
Before loading enve-
lopes, press them down 
to make sure that all air is 
removed, and make sure 
that the folds of the flaps 
are firmly pressed; other-
wise the envelopes may 
become wrinkled or a 
media misfeed may 
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the 
flap along the long edge 
(Envelope C6, Envelope 
Monarch, and Envelope 
DL), load the envelopes 
with the flap side up.
5Slide...

Loading Media 114
6Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of media that is loaded. See also “PAPER MENU” on 
page 37.
Loading Label Sheets/Postcards/Thick Stock/Glossy 
Media and Transparencies
1Open Tray 1.
2Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals 

Loading Media 115
3Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
4Load the media face down in the 
tray.
Up to 20 sheets can be 
loaded into the tray at 
one time.
5Slide the media guides against 
the edges of the media.
6Select PAPER MENU/PAPER SOURCE/TRAY 1/PAPER SIZE and 
PAPER TYPE in the configuration menu, and then select the setting for 
the size and type of media that is loaded. See also “PAPER MENU” on 
page 37.
Downloaded...

Loading Media 116
Tray 2
Loading Plain Paper
1Pull out Tray 2.
2Press down the media pressure 
plate to lock it into place.
3Slide the media guides to pro-
vide more space between them.
Downloaded From ManualsPrinter.com Manuals