Konica Minolta magicolor 4650DN User Manual
Here you can view all the pages of manual Konica Minolta magicolor 4650DN User Manual. The Konica manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 112
Memory Direct 98 Memory Direct PDF, XPS, JPEG and TIFF files saved on USB memory devices can be printed by plugging the USB memory device into the printer. Memory direct can be used only if the optional hard disk kit or a Com- pactFlash card is installed. In order to perform collated printing with memory direct, the optional hard disk kit or a CompactFlash card of 1 GB or more must be installed. For details on specifying settings with the control panel, refer to “MEMORY DIRECT” on page 62. Printing...
Page 114
Media Specifications 100 Media Specifications What types and sizes of media can I load? Media Media Size Tray* Duplex** (double-sided)Inch Millimeter Letter 8.5 x 11.0 215.9 x 279.4 1/2/3 Yes Legal 8.5 x 14.0 215.9 x 355.6 1/3 Yes Statement 5.5 x 8.5 139.7 x 215.9 1/2 No Executive 7.25 x 10.5 184.2 x 266.7 1/2/3 Yes A4 8.2 x 11.7 210.0 x 297.0 1/2/3 Yes A5 5.9 x 8.3 148.0 x 210.0 1/2 No A6 4.1 x 5.8 105.0 x 148.0 1/2 No B5 (JIS) 7.2 x 10.1 182.0 x 257.0 1/2/3 Yes B6 5.0 x 7.2 128.0 x 182.0 1/2 No Folio...
Page 115
Media Types 101 For custom sizes, use the printer driver to specify the settings within the ranges shown in the table on previous page. Media Types Before purchasing a large quantity of special media, do a trial print with the same media and check the print quality. Keep media on a flat, level surface in its original wrapper until it is time to load it. For a list of approved media, refer to printer.konicaminolta.com. Plain Paper (Recycled Paper) Use media that is Suitable for plain paper laser...
Page 116
Media Types 102 DO NOT use media that is „Coated with a processed surface (such as carbon paper, and colored paper that has been treated) „Carbon backed „Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and heat-press transfer paper) „Cold-water-transfer paper „Pressure sensitive „Designed specifically for inkjet printers (such as superfine paper, glossy paper, glossy film, and postcards) „Paper that has already been printed on –Paper that has been printed on with...
Page 117
Media Types 103 Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all thick stock to ensure acceptable performance and to ensure that the image does not shift. DO NOT use thick stock that is „Mixed with any other media in Tray 1 (as this will cause printer misfeed- ing) Envelopes Print on the front (address) side only. Some parts of the envelope consist of three layers of paper—the front, back, and flap. Anything printed in these lay- ered regions may be lost or...
Page 118
Media Types 104 „Dry DO NOT use envelopes that have „Sticky flaps „Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal- ing „Transparent windows „Too rough of a surface „Material that will melt, vaporize, offset, discolor, or emit dangerous fumes „Been presealed Labels A sheet of labels consists of a face sheet (the printing surface), adhesive, and a carrier sheet: „The face sheet must follow the plain paper specification. „The face sheet surface must cover the entire carrier...
Page 119
Media Types 105 Labels may stick to the fuser, causing them to peel off and media misfeeds to occur. „Are precut or perforated Letterhead Try printing your data on a sheet of plain paper first to check placement. Postcards Try printing your data on a sheet of plain paper first to check placement.Capacity Tray 1 (Manual Feed Tray)Up to 20 sheets, depending on their size and thickness Tray 2/3Not supported OrientationFace down Driver Media TypeLetterhead Weight60-90g/m² (16-24 lb bond) DuplexingSee...
Page 120
Media Types 106 Use postcards that are „Approved for laser printers DO NOT use postcards that are „Coated „Designed for inkjet printers „Precut or perforated „Preprinted or multicolored If the postcard is warped, press on the warped area before putting it in Tray 1. Transparencies Do not fan transparencies before loading them. Resulting static elec- tricity may cause printing errors. If you touch the face of the transparencies with your bare hands, print quality may be affected. Keep the printer...