Konica Minolta magicolor 3730DN User Manual

Configuring the Printer 5-34
Reset Printer
The System - Maintenance - Reset Printer page allows you to reset the 
printer controller.
Item Description
Reset button When clicked, the message “Is it OK to reset the 
Printer?” appears. Click OK to automatically restart 
the printer.
Downloaded From ManualsPrinter.com Manuals 

Configuring the Printer5-35 Print Page
From this page, timeout periods for each interface can be specified.
Local Interface
The Print - Local Interface window allows you to configure the following 
items:
Item Description
Network I/O Timeout Specify the length of time until input/output times out 
during a network connection.
Choices: 15, 60, 300
Default: 60
Configuration Menu Equivalent:
INTERFACE - NETWORK TIME OUT
USB I/O Timeout Specify the length of time until input/output times out 
during a USB...

Configuring the Printer 5-36
Network Page
This page allows you to configure network settings. For more information on 
these protocols, see Chapter 4 “Network Printing”
TCP/IP
TCP/IP (shown above)
The Network - TCP/IP - TCP/IP window allows you to configure the following 
items. For more information on these TCP/IP, see Chapter 4 “Network Print-
ing”
Item Description
Speed Specifies the operating mode and speed for Ethernet.
Choices: Auto, 10Base-T(Half), 10Base-T(Full), 
100Base-TX(Half),...

Configuring the Printer5-37
IPv4 Settings
The Network - TCP/IP - IPv4 Settings window allows you to configure the 
following items. For more information on these TCP/IP, see Chapter 4 “Net-
work Printing”
Item Description
Auto IP Specifies the automatic assigning method for the printer 
IP address.
Choices: DHCP, BootP, ARP/PING
Default: DHCP
Configuration Menu Equivalent: 
NETWORK - IP ADDRESS - IP 
ADDRESS SET AUTO
IP Address* Sets the printer’s IP address.
Range: 0–255 for each xxx triplet
Default:...

Configuring the Printer 5-38
Subnet Mask* Sets the printer’s subnet mask address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
If the specified subnet mask address is outside of 
the allowable range, the value is not changed, even 
after the Apply button is clicked. The setting 
returns to the previous value.
Default Gateway* If a router is used on the network, sets the router’s 
address.
Range: 0–255 for each xxx triplet
Default: 0.0.0.0
If the specified router address is outside of the...

Configuring the Printer5-39
RAW Port Settings
The Network - TCP/IP - RAW Port Settings window allows you to configure 
the following items. For more information on these TCP/IP, see Chapter 4 
“Network Printing”
Item Description
RAW Port 
NumberIdentifies the number of the printer’s RAW port.
Choices: 1 - 65535
Default: 9100
Apply button Applies the configuration settings for this window.
Clear button Resets all configuration settings to previous values.
Downloaded From ManualsPrinter.com Manuals 

Configuring the Printer 5-40
Bonjour
The Network - Bonjour page allows you to configure the following items.
Item Description
Bonjour Select whether to enable or disable the Bonjour function.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent: 
NETWORK - BONJOUR - BONJOUR SET
Bonjour Name Specify the Bonjour name for the printer.
Range: 1 to 63 characters
Default: KONICA MINOLTA magicolor 3730 (xx:xx:xx) 
“xx:xx:xx” refers to the last six digits of the MAC 
address (in hexadecimal)....

Configuring the Printer5-41
IPP
The Network - IPP window allows you to configure the following items. For 
details on IPP, refer to Chapter 4 “Network Printing” In order to apply the set-
tings, the printer must be turned off, then on again after the setting is speci-
fied.Apply button Applies the configuration settings in this page.
Clear button Resets all configuration settings to previous values.
Item Description
IPP Print Sets whether or not to use IPP.
Choices: Enable, Disable
Default: Enable...

Configuring the Printer 5-42
Printer Name Displays the printer’s name.
Range: Up to 127 characters
Default: KONICA MINOLTA magicolor 
3730 (xx:xx:xx)
Specify the settings from the 
System - Machine Settings page.
xx:xx:xx refers to the last six digits 
of the MAC address (in 
hexadecimal).
Printer Location Displays the printer’s location.
Default: [Blank]
Specify the settings from the 
System - Machine Settings page.
Printer Information Displays the printer information.
Default: [Blank]
Specify the...

Configuring the Printer5-43
SNMP
The Network - SNMP window allows you to configure the following items:
Item Description
SNMP SNMP v1/
v2c(IP)If Enable is selected, SNMP v1/v2c(IP) is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
NETWORK - SNMP - SNMP SET
UDP Port Specifies the UDP port number.
Range: 1 - 65535
Default: 161
SNMP v1/
v2cRead 
Commu-
nity NameSpecifies the community name to be used for scan-
ning.
Range: 1 to 15 characters
Default: public
Write If Enable...