Konica Minolta magicolor 3730DN User Manual

Network Connection 4-4
3When the printer’s message window displays READY, print a configura-
tion page to verify that the IP address is set.
4Install the printer driver and utilities.
If the printer cannot be connected to a DHCP server, an IP 
address within the range between 169.254.0.0 and 
169.254.255.255 is automatically set. Press this 
key...(until) the message window displays . . .
READY
MENU
SPECIAL PAGES
PRINT
CONFIG PAGE
CONFIG PAGE 
PRINT ?
CONFIG PAGE
PRINTING
Downloaded From...

Network Connection4-5
Setting the Address Manually
You may also manually change the printer’s IP address, subnet mask, and 
gateway by using the following instructions. (See Chapter 3 “Understanding 
the Ethernet Configuration Menus” for more information.) 
When manually setting the IP address, turn off DHCP, BOOTP and 
ARP/PING first. In addition, when the IP address is changed, add a 
new port or reinstall the printer driver.
CAUTION
You should always notify your network’s administrator before...

Network Connection 4-6
3If you don’t set the subnet mask or gateway, go to step 5.
If you don’t set the subnet mask, but you set the gateway, go to step 4.
If you set the subnet mask, follow these steps.
IP ADDRESS
192.168.1.2
Use the   and   keys to move to each of the four number triplets. 
Use the   and   keys to increase or decrease each number.
xxx.xxx.xxx.xxx
IS SELECTED
Press this 
key...(until) the message window displays . . .
SUBNET MASK
255.255.255.0
Use the   and   keys to move to each of the...

Network Connection4-7
4If you don’t set the gateway, go to step 5.
If you set the gateway, follow these steps.
5Save your configuration changes and make the printer ready for printing 
again. Press this 
key...(until) the message window displays . . .
DEFAULT GATEWAY
192.168.1.1
Use the   and   keys to move to each of the four number triplets.
Use the   and   keys to increase or decrease each number.
xxx.xxx.xxx.xxx
IS SELECTED
Press this 
key...(until) the message window displays . . .
Press the Cancel...

Network Connection 4-8
6Print a configuration page to verify that the correct IP address, subnet 
mask, and gateway have been set.
7Install the printer driver and utilities. Press this 
key...(until) the message window displays . . .
READY
MENU
SPECIAL PAGES
PRINT
CONFIG PAGE
CONFIG PAGE 
PRINT ?
CONFIG PAGE
PRINTING
Downloaded From ManualsPrinter.com Manuals 

Network Printing4-9
Network Printing
Network printing terms are described below.
„Bonjour
„BOOTP
„DHCP
„HTTP
„IPP
„LPD/LPR
„SNMP
„Port9100
This chapter contains descriptions on the network printing terms and the IPP 
printing methods.
Bonjour
Macintosh network technology for automatically detecting devices connected 
to the network and for specifying settings. Previously called “Rendezvous”, 
the name was changed to “Bonjour” starting with Mac OS X v10.4.
BOOTP
BOOTP (Bootstrap Protocol) is an Internet...

Network Printing 4-10
HTTP
HTTP (HyperText Transfer Protocol) is the underlying protocol used by the 
World Wide Web. It defines how messages are formatted and transmitted, 
and what actions web servers and browsers should take in response to vari-
ous commands. For example, when you enter a URL in your browser, this 
actually sends an HTTP command to the Web server directing it to fetch and 
transmit the requested web page. 
IPP
IPP (Internet Printing Protocol) is a protocol for end users’ most common...

Network Printing4-11 Printing via IPP (Internet Printing Protocol)
You must have administrator privileges in order to install the printer 
driver. 
If the User Account Control window appears when installing on Win-
dows 7/Vista/Server 2008, click the Allow button or the Continue but-
ton. 
For IPP printing, specify the network setting. Refer to “Making the 
Connection” on page 4-3 and “IPP” on page 4-10.
Adding an IPP Port using Add Printer Wizard - Windows 
Server 2003/XP/2000
„For Windows Server...

Network Printing 4-12
2In the URL field in the next dialog box, enter the printer’s network path-
name in one of the following formats, and then choose Next: 
„http://ipaddress/ipp
„ipp://ipaddress/ipp
„http://ipaddress:80/ipp
„http://ipaddress:631/ipp
If your system cannot connect to the printer, the following message appears:
„Windows Server 2003/XP—“Windows cannot connect to the printer. 
Either the printer name was typed incorrectly, or the specified printer 
has lost its connection to the server....

Network Printing4-13
4Choose Have Disk.
5Choose Browse.
6Locate the directory on the CD/DVD where the printer driver files are 
located (for example: Driver\Windows\English\WIN32), and then click 
Open.
7Click OK.
Downloaded From ManualsPrinter.com Manuals