Konica Minolta bizhub C550 User Manual

Saving documents2
C5502-55
4Adjust the sharpness.
5Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals 

Saving documents2
C5502-56 Frame Erase (Erase)
An area around the edge of the document can be erased. Areas with a width 
between 1/16 and 2 inches on the North American (inch) model (between 0.1 
and 50.0 mm on the European (metric) model) can be specified separately for 
the left and right sides and the top and bottom.
!
Detail 
If a width to be erased around the document is specified with “Frame 
Erase” with the “Book Copy” function, the same settings are also applied 
on the Frame Erase screen...

Saving documents2
C5502-57
4Select the width of the area to be erased.
– To use frame erasing, touch [Yes].
– To erase the same width on all sides, touch [Frame], and then spec-
ify a value.
– To specify different widths for the top, left, right and bottom, touch 
the button for the desired location, and then specify a value. To 
cancel frame erasing, touch [None].
– On the North American (inch) model:
– On the European (metric) model:
5Touch [OK], and then touch [OK] in the next two screens that...

Saving documents2
C5502-58 Book Copy (Book Scan)
Select the method for scanning page spreads. The following four scanning 
methods are available. In addition, the binding position and erase settings 
can be specified.
2
Note 
Specify the size of the page spread as the scan size.
The document can be scanned while erasing the shadows typical for page 
spreads.
2
Note 
If a width to be erased around the document is specified with “Frame 
Erase” with the “Book Copy” function, the same settings are also...

Saving documents2
C5502-59
2Touch [Book Scan].
3Touch [Book Copy].
4Specify the settings for the “Book Copy” function.
Downloaded From ManualsPrinter.com Manuals 

Saving documents2
C5502-60 – If “Separation”, “Front Cover” or “Front + Back Covers” was select-
ed, touch [Binding Position], and then select the binding position.
5Touch [OK], and then touch [OK] in the next two screens that appear.
Scan Size (Application)
Select the size of paper that is to be scanned.
The following Scan Size settings are available.
2
Note 
If the “Book Copy” function was set, specify the size of the page spread.
1In the Save Document screen, touch [Scan Settings].
SettingDescription...

Saving documents2
C5502-61
2Touch [Application].
3Touch [Scan Size].
4Select the desired size and orientation.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 

Saving documents2
C5502-62 – On the European (metric) model:
– Select the orientation and size of the paper to be scanned.
– Touching [Custom Size] displays the Custom Size screen. Use the 
keypad to type in the size, and then touch [OK].
– The values can be specified in 1/16-inch increments on the North 
American (inch) model (in 0.1 mm increments on the European 
(metric) model).
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 

Saving documents2
C5502-63 – On the European (metric) model:
– Touching [Photo Size] displays the Photo Size screen. Select the 
orientation and size of the photo to be scanned, and then touch 
[OK].
– On the North American (inch) model:
– On the European (metric) model:
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals 

Saving documents2
C5502-64 Original Settings
Specify the type of document that is loaded, for example, if it contains mixed 
page sizes or is folded in a zigzag.
2
Note 
The original settings and direction settings can be used together.
1In the Save Document screen, touch [Original Settings].
2Select settings for the Original Settings functions.
ParameterDescription
Mixed  Original Select this setting when documents of different sizes are loaded into 
the ADF (optional). The scan speed is decreased since...