Konica Minolta bizhub C452 User Manual

bizhub C652/C652DS/C552/C552DS/C4525-5
5.1 Basic5
5.1.2 Paper
Select the paper type and size to be printed, or to change the paper size and paper type settings specified 
for each paper tray.
The paper size can be selected automatically according to the original size or it can be specified manually.
0If you select [Transparency], specify [Black] for [Color] in advance.
0The auto zoom setting and the auto paper setting cannot be selected at the same time.
0If a setting for special paper is selected for a...

bizhub C652/C652DS/C552/C552DS/C4525-6
5.1 Basic5
Configuring a custom size
%[Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Custom Size].
Configuring wide paper
%[Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Wide Paper]. Settings
X/Y • North American model (inch): Configure the length [X] and width [Y] with 
pressing [+] or [-].
• European model (cm): Enter the length [X] and width [Y] of the paper.
Store Register custom paper sizes.
memory  1  to  5 Select the memory...

bizhub C652/C652DS/C552/C552DS/C4525-7
5.1 Basic5
5.1.3 Zoom
The original image size in the original can be enlarged or reduced.
0The auto zoom setting and the auto paper setting cannot be selected at the same time.
0If the auto zoom setting is selected and an enlargement is to be copied on paper larger than the original, 
load the original with the same orientation as the paper.
%Press [Basic] ö [Zoom].
dReference
To set image rotation:
Press the [Utility/Counter] key ö [User Settings] ö [Copier...

bizhub C652/C652DS/C552/C552DS/C4525-8
5.1 Basic5
5.1.4 Duplex/Combine
Configure whether to scan one side or both sides of the originals and whether to print on one side or both 
sides of the paper. Multiple (2, 4 or 8) pages of original images can be reduced in size and printed on a single 
page.
Using the Duplex/Combine function, you can save paper sheets for copying.
%Press [Basic] ö [Duplex/Combine].
Settings
1-Sided > 1-Sided
2-Sided > 1-Sided
1-Sided > 2-Sided
2-Sided > 2-Sided
Binding Position...

bizhub C652/C652DS/C552/C552DS/C4525-9
5.1 Basic5
Binding Position Output Binding Posi-
tionSelect the output binding position from [Left 
Bind], [Right Bind], [Top] and [Auto]. 
• If the binding position for the copy is set to 
[Auto], the binding position is automatically 
determined according to the orientation of the 
loaded original. If the original length is 11-
11/16 inch (297 mm) or less, a binding posi-
tion along the long side of the paper is select-
ed. If the original length is more than...

bizhub C652/C652DS/C552/C552DS/C4525-10
5.1 Basic5
5.1.5 Finishing
Various settings can be selected for sorting and finishing copies fed into the copy output tray.
0The Staple settings are available only if the optional finisher is installed.
0The Punch settings are available only if the Punch Kit PK-516 or Z Folding Unit is installed on the 
Finisher FS-526 or the Punch Kit PK-517 is installed on the Finisher FS-527.
0The Fold/Bind is available only if the Saddle Stitcher is installed on the optional...

bizhub C652/C652DS/C552/C552DS/C4525-11
5.1 Basic5
Offset Yes/No Specify whether to separate each set of copies from another set in the output 
tray when copying multiple sets of multi-page originals.
When the Finisher or Job Separator JS-504 is not installed:
If the following conditions are met, printed copies are fed out and sorted in an 
alternating crisscross pattern.
•8-1/2 e 11, A4 or B5 paper is used
• Paper of the same size and type is loaded with the w orientation in one pa-
per tray and with...

bizhub C652/C652DS/C552/C552DS/C4525-12
5.1 Basic5
5.1.6 Post Inserter
When the Post Inserter PI-505 is installed on the Finisher FS-526, you can manually operate the Finisher 
FS-526 using the post inserter control panel.
Reference
-Only the lower tray can be used as the output tray. The upper tray is not available.
Keys on control panel
Position Setting Configure desired staple or hole-punch positions.
Select Auto, and the machine automatically judges the staple or punch posi-
tions for the paper...

bizhub C652/C652DS/C552/C552DS/C4525-13
5.1 Basic5
Finishing using Post Inserter
1Place paper in the lower tray of the Post Inserter, and align the lateral guide to the paper size.
%Set the paper by placing it so that its top side faces the back of the machine.
%To use the corner staple or 2-staple option, load the paper face up.
%To perform Punch, load the paper face up.
%To perform Bind, load the front side of the bound paper face down.
%To perform Tri-Fold, load the outside of the tri-folded paper...

bizhub C652/C652DS/C552/C552DS/C4525-14
5.1 Basic5
3Press the [Start] key.
The original is scanned.
4Load the next batch of the original, and then press the [Start] key.
%To change the scanning settings, press [Change Setting].
5Repeat Step 4 until all pages of the original are scanned.
6After all original pages have been scanned, press [Finish].
7Press the [Start] key.
dReference
To set the Separate Scan output method:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Separate...