Konica Minolta bizhub C451 User Manual

Specifying Utility mode parameters7
C4517-39
2
Reminder 
When the machine is turned off, then on again with the main power 
switch, wait at least 10 seconds to turn on the machine after turning it off; 
otherwise, the machine may not function correctly.
In order to enable the setting specified in the Overwrite Temporary Data 
screen, “Overwrite Temporary Data” must be set to “Yes”.
Overwrite All Data
The machine can be set to overwrite all data on the hard disk.
The methods for overwriting data are...

Specifying Utility mode parameters7
C4517-40
1Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 7-4.
2Touch [6 HDD Setting] in the Security Setting screen.
3Touch [3 Overwrite All Data] in the HDD Setting screen.
The Overwrite All Data screen appears.
4Select the desired method for overwriting data on the hard disk, and 
then touch [Overwrite].
A confirmation...

Specifying Utility mode parameters7
C4517-41
6Follow the instructions in the screen to restart the machine.
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected screen without applying 
the changes to the settings.
– To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility mode by touching [Close] in 
each screen until the screen for the Copy, Fax/Scan or User Box 
mode appears.
All data on...

Specifying Utility mode parameters7
C4517-42
1Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator Settings screen” on page 7-4.
2Touch [6 HDD Setting] in the Security Setting screen.
3Touch [4 HDD Lock Password] in the HDD Setting screen.
The HDD Lock Password screen appears. From this screen, the pass-
word can be changed or the hard disk locking password can be can-
celed.
4Type in the...

Specifying Utility mode parameters7
C4517-43
5Type the password specified in step 4, and then touch [OK].
The message “Turn the main switch OFF and ON.” appears.
6Follow the instructions in the screen to restart the machine.
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected screen without applying 
the changes to the settings.
– To finish specifying settings in the Utility mode, press the [Utility/
Counter] key. Otherwise, exit the Utility...

Specifying Utility mode parameters7
C4517-44 HDD Encryption Setting
If the security kit is installed, the machine can be set to encrypt the hard disk.
!
Detail 
[HDD Encryption Setting] appears when security kit SC-503 is installed.
If the encryption key is specified or changed, data saved on the hard disk 
may no longer be available.
1Touch [Security Settings] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to 
“Displaying the Administrator...

Specifying Utility mode parameters7
C4517-45
5Using the control panel keypad or the keyboard that appears in the 
touch panel, type in the new encryption key. To delete the entered en-
cryption key, press the [C] (clear) key.
The HDD Encryption Setting screen appears again.
6Follow the instructions in the screen to restart the machine.
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected screen without applying 
the changes to the settings.
– To...

Specifying Utility mode parameters7
C4517-46
2
Note 
The encryption key must be registered by the machine’s administrator.
The encryption key must contain 20 characters.
Do not specify an encryption key that contains the same character re-
peated 20 times.
Be sure to keep the specified encryption key in a safe place so that it will 
not be lost.
2
Reminder 
When the machine is turned off, then on again with the main power 
switch, wait at least 10 seconds to turn on the machine after turning it off;...

Specifying Utility mode parameters7
C4517-47
4To format the hard disk, touch [Yes], and then touch [OK].
– To return to the HDD Settings screen without formatting the hard 
disk, touch [No].
The hard disk is formatted.
5Follow the instructions in the screen to restart the machine.
– To cancel changes to the settings, touch the menu item name in the 
Bookmark screen to return to the selected screen without applying 
the changes to the settings.
– To finish specifying settings in the Utility mode, press...

8Appendix
Downloaded From ManualsPrinter.com Manuals