Kodak EasyShare Printer Dock 6000 User Manual

21
Chapter 4
1
Make sure the power is connected to the 
printer dock (see Connecting the Power, 
page 5).
2Connect the Audio/Video cable from the 
printer dock A/V out connector to the 
television video-in port.
3Turn on your television, and change to a 
video channel.
See your television user’s guide for details.
4Place the Kodak EasyShare camera in the 
printer dock (see Docking and Charging the 
Camera, page 13).
5Press the Slide Show button  .
The camera screen turns off; the 
television screen acts...

urg_00041.book  Page 22  Friday, January 3, 2003  10:37 AM
Downloaded From ManualsPrinter.com Manuals 

23
5Using the Printer Dock with a 
Computer
System Requirements
Windows-based Computer

Personal computer running Windows 98, 98SE, ME, 2000*, or XP*

233 MHz processor or greater

64 MB of RAM (128 MB for Windows XP)

200 MB of available hard disk space

CD-ROM drive

Built-in USB port 

Color monitor with a minimum resolution of 800 x 600 pixels; High Color 
(16-bit) or true color (24-bit) recommended

Internet access for ordering supplies online
Mac OS X

Power Mac G3, G4, G4 Cube; iMac Powerbook G3,...

 24
Chapter 5
Installing the Software
CAUTION:Do not install the Kodak 
EasyShare printer dock 6000 
software with the printer dock 
connected to the computer. It 
may cause the software to load 
incorrectly. If the printer dock 
is connected, disconnect it 
before you proceed.
NOTE: For more information on installing the software, see the ReadMe file on 
the Kodak EasyShare printer dock 6000 software CD.
On a Windows-based computer:
1Close all software applications that are open on your computer.
2Place...

25
Chapter 5
3
Load the software:
aDouble-click the CD icon on the desktop, then double-click the 
Kodak PD6000 Installer icon.
bFollow the on-screen instructions. Use the installer menus to select a 
language. When prompted, restart the computer.
cOpen the finder window and click the Applications button. If you don’t 
see the Applications button, access the Applications folder on your 
operating drive.
dOpen the Utilities folder, then double-click Print Center.
eIn the Printer List window, click the Add...

 26
Chapter 5
On Mac OS X:
1Double-click the operating drive for your system.
2Select Library, then select Printers.
3Open the Kodak folder, then double-click Kodak PD6000 Uninstaller. 
Follow the on-screen instructions.
Connecting to a Computer
A USB cable is required to connect to a computer. Use the USB cable that came 
with your Kodak EasyShare camera. To purchase one separately, see a retail 
dealer of Kodak products or visit www.kodak.com/go/printerdock.
CAUTION:Make sure your camera is NOT in the...

27
Chapter 5
Transferring Pictures
You can transfer pictures directly from your Kodak EasyShare camera to your 
computer (see your camera user’s guide), or with the camera docked, you can 
transfer pictures through the printer dock.
1Make sure the Kodak EasyShare printer dock 6000 software is installed 
(see Installing the Software, page 24) and the printer dock is connected to 
your computer (see Connecting to a Computer, page 26).
2Place the camera in the printer dock (see Docking and Charging the...

 28
Chapter 5
Printing from a Computer
We recommend using the Kodak EasyShare software included with your Kodak 
EasyShare camera for printing. This software lets you to take advantage of a 
wide range of features, including full color enhancement, red eye reduction, 
picture organization, and much more.
See your camera quick start guide or the Kodak EasyShare software Help for 
information on installing and using the Kodak EasyShare software.
If there are no pictures on your computer, use the printer...

29
Chapter 5
Printing Using Other Applications
1Make sure the Kodak EasyShare printer dock 6000 software is installed 
(see Installing the Software, page 24), and the printer dock is connected to 
your computer (see Connecting to a Computer, page 26).
2Open the pictures you wish to print in the application from which you want 
to print.
3Access printer settings by selecting Print or Page Setup from the File menu 
(depending on your application and platform).
4Make sure that Kodak PD6000 is selected as...

 30
Chapter 5
On Windows 98/ME:
1From the Start menu, select Settings, then select Printers.
2Right-click the Kodak PD6000 printer icon, then select Properties.
3Click the Printer Options tab.
4Under Color Control, select Natural or Enhanced.
5Click OK when complete.
On Mac OS X:
Make sure the Kodak PD6000 is selected as the current printer.
1From an application File menu, select Print.
2Use   to scroll through the available panels and select Color.
3Select Kodak Color.
4Choose Natural or Enhanced....