Kodak Dp2000 Projector User Manual

5
Introduction
The KODAK DP2000 Digital Projector is specifically designed for 
the mobile presenter. It packs XGA 1024 x 768 graphics with 
16.7 million colors into a small, 4.8 pound package. It generates 
crisp, clear images using Digital Light Processing™ (DLP) 
technology. The DP2000 is easy to connect, easy to use, easy to 
transport, and easy to maintain.
Included with the DP2000 is Kodak’s exclusive Image Manager 
feature. With this feature you can select the image display setting best 
suited...

User’s Guide KODAK DP2000 Digital Projector 
6
Unpacking the Projector
The projector comes with the items shown here. Check to make sure 
that all are included. Contact your dealer of KODAK products 
immediately if anything is missing.
    
1. Digital projector and lens cap   6. VESA computer cable
2. Soft carry case   7. Audio cable adapter
3. Remote control   8. Audio cable
4. Power cords (U.S., U.K, Euro)   9. Composite video cable
5.User’s Guide, Quick Start Guide, 
and Online User Guide CD10.
11.USB...

Introduction
7
Projector Features
Usage Guidelines
• Do not look directly into the projection lens when the lamp 
is turned on. The bright light may harm your eyes.
• Do not block the grills on the projector. Restricting the air 
flow can cause it to overheat and turn off. If this happens, 
you must wait a minute before attempting to turn it back 
on.
• Handle the projector as you would any product with glass 
components. Be especially careful not to drop it.
• Avoid leaving the projector in direct...

User’s Guide KODAK DP2000 Digital Projector 
8
If You Need Assistance
The first place to look for help is in “Maintenance & 
Troubleshooting” on page 37. But you can also get help online, by 
fax, or by phone.
Online Services
Contact Kodak via:
Faxed Information
Kodak offers automated support by fax:World Wide Web http://www.kodak.com
(click on Service and Support)
America Online (keyword) KODAK
CompuServe GO KODAK
Kodak Internet List Server [email protected]; or 
ftp.kodak.com
U.S. and Canada...

Introduction
9
Customer Support
If you have questions concerning the operation of your KODAK 
projector, you can speak directly to a customer support representative. 
Have the projector serial number ready, and be at your computer with 
your projector when you call.
In the U.S. and Canada call toll free, 1-888-375-6325, between the 
hours of 9:00 a.m. and 8:00 p.m. (Eastern Standard Time) Monday 
through Friday.
The International Toll Line is +44 (0) 131 458 6714.
In Europe call
Austria/Osterreich 0179...

User’s Guide KODAK DP2000 Digital Projector 
10
Warranty
This product is backed by a limited two-year warranty. The details of 
the warranty are printed at the back of this manual. A longer term 
warranty can be purchased from your dealer of KODAK products. 

11
Setting up the Projector
This section describes how to:
•determine where to position the projector
•connect the projector to a computer or a video player 
•turn on and turn off the projector
If you are experienced in setting up presentation systems, use the 
Quick Start card that came with the KODAK DP2000 Digital 
Projector. Otherwise, follow the procedures described here.
Positioning the Projector
Note: If you want to project from behind a translucent screen, set up 
the projector behind your...

User’s Guide KODAK DP2000 Digital Projector 
12
Connecting the Projector 
,FRQVRQWKHSURMHFWRUZLOODLG\RXZKHQFRQQHFWLQJWKHSURMHFWRUWRD
FRPSXWHURUYLGHRSOD\HU
&DXWLRQ 7XUQRIIWKHFRPSXWHUPRQLWRUDQGSURMHFWRUZKHQHYHU
\RXFRQQHFWWKHFRPSRQHQWV
Connecting to a Computer
When you connect the projector to a computer, make sure that the 
distance between it and the projector is 6 feet or less.
Always use the power cord and VESA cable that shipped with the 
projector. A surge-protected...

Setting up the Projector
13
To connect to a computer:
 1. Plug one end of the VESA computer cable into the video 
connector on your computer.
 2. Plug the other end of the VESA computer cable in the   
connector on the projector
Do you want to play your computer’s audio on the 
projector?
 1. Plug either end of the audio cable into the audio connector on 
your computer.
 2. Plug the other end of the audio cable into the   connector on 
the projector.
audio cable
VESA cable 

User’s Guide KODAK DP2000 Digital Projector 
14
Do you want to control the computer’s mouse from the 
projector’s remote control or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
 1. Plug the 6-pin end of the PS/2 mouse cable into the mouse 
connector on your computer. 
 2. Plug the 8-pin end of the PS/2 mouse cable into the   connector 
on the cable hub.
If your computer has a USB connector and is running a USB 
compatible operating system, use the USB mouse cable. 
 1. Plug...