Kodak Dp1100 Projector User Manual

Reference Manual KODAK DP900 / DP1100 
283/99
Adjusting the Projector
To focus the image, rotate the focus ring (Figure 12) until the 
image is clear. To zoom the image, rotate the zoom ring. This 
adjusts the image size without affecting focus.
Figure 12 Focus ring, zoom ring, and elevator button
The projector is equipped with a self-locking, quick-release 
elevator foot and button (Figure 13).
To raise the projector:
 1. Press and hold the elevator button (Figure 13).
 2. Raise the projector to the...

Using the Projector
3/9929
Using the Keypad and Remote Buttons
The keypad is lit orange when the projector is on and lit green 
while the menus are displayed. While the menus are displayed, 
the volume, source, and standby buttons act as navigation 
buttons. See “Using the On-Screen Menus” on page 31 for 
details.
.
Figure 14  Keypad
simulates left and right mouse buttons
menu button - displays a menu of 
projector options on the screen
volume - 
increases volume
standby - turns off the image without...

Reference Manual KODAK DP900 / DP1100 
303/99
Menu 
Press   to open the on-screen menus (the keypad lights 
green). Press   again to close the menus. When you close the 
menus, the projector saves any changes you made. For more 
information about the on-screen menus, see page 31.
Mouse buttons
Use the left and right mouse buttons to make selections and 
adjustments in the menus. See “Using the On-Screen Menus” on 
page 31 for details.
Source (keypad only)   or Computer and 
Video (remote only)
When you...

Using the Projector
3/9931
Using the On-Screen Menus
The projector has seven drop-down menus that allow you to make 
image adjustments and change a variety of settings. Most of these 
adjustments aren’t available directly from the keypad.
Note: Some menu items may be grayed out at certain times. This 
indicates that the item is not applicable to your setup (for 
example, video standards do not apply to computer 
sources) or the item is not enabled until another selection is 
made (for example, Manual...

Reference Manual KODAK DP900 / DP1100 
323/99
Display Menu 

Figure 16 Display menu
Brightness
Adjusting the brightness changes the intensity of the image.
Press the left mouse button to darken the image.
Press the right mouse button to lighten the image.
Tint
The tint adjusts the red-green color balance in the projected 
image. Changing the Tint setting has no effect on PAL or 
SECAM video sources. 
Press the left mouse button to increase the amount of 
green in the image.
Press the right mouse...

Using the Projector
3/9933
Contrast
The contrast controls the degree of difference between the 
lightest and darkest parts of the picture. Adjusting the contrast 
changes the amount of black and white in the image.
Press the left mouse button to decrease the contrast.
Press the right mouse button to increase the contrast, 
making the blacks appear blacker and the whites 
appear whiter.
Color
The color setting adjusts a video image from black and white to 
fully saturated color.
Press the left mouse...

Reference Manual KODAK DP900 / DP1100 
343/99
Audio Menu
 
Figure 17Audio menu
Vo l u m e
Note: Changing the volume from the menu is the same as 
changing it using the keypad.
Press the left mouse button to decrease the volume. 
Press the right mouse button to increase the volume.
Volume adjustments you make are saved for each source.
Treble
The treble setting controls the high frequencies of your audio 
source. 
Press the left mouse button to decrease the treble. 
Press the right mouse button to...

Using the Projector
3/9935
Image Menu

Figure 18 Image menu
Auto Image
Note: Some screen savers interfere with the operation of Auto 
Image. If you’re experiencing problems, try turning your 
screen saver off, then turning Auto Image off and back on.
The projector automatically adjusts tracking, signal 
synchronization and vertical and horizontal position for most 
computers (Auto Image does not apply to video sources). If you 
want to adjust these features manually, you must turn off 
Auto 
Image...

Reference Manual KODAK DP900 / DP1100 
363/99
Manual Sync
The projector adjusts signal synchronization automatically for 
most computers. But if the projected computer image looks fuzzy 
or streaked, try turning 
Auto Image off then back on again. If the 
image still looks bad, try adjusting the signal synchronization 
manually:
 1. Turn Auto Image off.
 2. Highlight Manual sync, then press either mouse button 
repeatedly until the image is sharp and free of streaks.
Manual Tracking
The projector adjusts...

Using the Projector
3/9937
Vertical position
Follow these steps to manually adjust the vertical position.
 1. Turn Auto Image off.
 2. Highlight Vertical position, then press the left mouse button 
to move the image down or press the right mouse button to 
move the image up.
Positioning adjustments are saved when you power off the 
projector.
Controls Menu 
 
Figure 19 Controls menu
Video Standard
Note: If you already know the video standard used in your 
geographical area, it’s often best to manually...