JVC Ux1 Manual

17
Turning Off the Power 
Automatically
To turn off the System after playback is over—
Auto Standby
This function works only when the source is CD.
When Auto Standby is in use, the A.STBY indicator lights 
on the display.
When the disc playback stops, the A.STBY indicator starts 
flashing.
If no disc operation is done for about 3 minutes while the 
indicator is flashing, the System turns off (stands by) 
automatically.
To turn off the System after a certain period of 
time—Sleep Timer
1
Specify the time...

18
Advanced Disc Operations
Programming the Playing Order—
Program Play
You can arrange the playing order of the tracks (up to 32) 
before you start playback.
•You cannot enjoy MP3 discs for program play.
•You can repeat all the programmed tracks by pressing 
REPEAT.
1Before starting playback, press PROGRAM.
2Select a disc by pressing CD 1–CD 5.
3Select tracks you want for Program Play.
4Repeat steps 2 and 3 to program the other tracks.
•To select a track from the same disc, repeat step 3.
5Start...

19
To check the programmed contents
While the PRGM indicator is shown on the display and 
before playback...
To modify the program
While the PRGM indicator is shown on the display and 
before playback...
To exit from Program Play
While the PRGM indicator is shown on the display...
Pressing 7 also cancels Program Play.
•During the PRGM indicator is shown on the display, you 
cannot open the disc trays.
Playing at Random—Random Play
You can play back all the tracks on the selected disc at 
random.
•You can...

20
Playing Repeatedly—Repeat Play
You can repeat playback.
For CD/MP3 (TRACK mode):
For MP3 (GROUP mode):
During Program Play:
During Random Play:
Prohibiting Disc Ejection—Child Lock
You can lock the disc trays so that no one can eject the 
loaded discs.
•This is possible while the System is on standby.
While the disc trays are closed...
•Only CD 1 0 can work for this function.
To cancel the prohibition, repeat the same procedure.
“UNLOCKED” appears on the display.
Repeats the current track.
Repeats all...

21
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with music, etc.
•You can store three Daily Timer settings; however, you 
can activate only one of Daily Timers at the same time.
•To exit from the timer setting, press CLOCK/TIMER as 
required.
•To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1Select one of the timer setting modes you want to set—
Daily 1 Timer, Daily 2 Timer, or Daily 3 Timer.
Remote control
CLOCK/
TIMERSET/RESUME...

22
2Make the timer setting as you want.
1
Set the hour then the minute for on-time.
2Set the hour then the minute for off-time in the 
same  manner.
3Select the playback source—“TUNER FM,” 
“TUNER AM,” “DISC,” or “AUX.”
When selecting tuner: Select a preset number or 
“P – – –” by pressing PRESET UP or PRESET 
DOWN, then press SET.
When selecting CD: Select a disc by pressing 
PRESET UP or PRESET DOWN, then press SET.
4
Set the volume.
If you select “VOL – –,” the volume is set to the level 
that was set...

23
Additional Information
Learning More about This System
Daily Operations—Playback (see pages 9 to 14)
Listening to the Radio:
•If you store a new station into an occupied preset number, the 
previously stored station in that number will be erased.
•When you unplug the AC power cord or if a power failure 
occurs, the preset stations will be erased in a few days. If this 
happens, preset the stations again.
Playing Back a Disc:
•When using an 8 cm (3-3/16 inch) disc, place it on the inner 
circle of the...

24
Troubleshooting
If you are having a problem with your System, check this list 
for a possible solution before calling for service.
General:
Adjustments or settings are  suddenly canceled before 
you finish.
]
There is a time limit. Repeat the procedure again.
Operations are disabled.
]The built-in microprocessor may malfunction due to 
external electrical interference.  Unplug the AC power cord 
and then plug it back in.
Unable to operate the System  from the remote control.
]The path between the...

25
Specifications
Amplifier section
Output Power:
120 W per channel, min. RMS, driven into 6 Ω at 1 kHz 
with no more than 10% total harmonic distortion.
Speakers Impedance: 6 Ω – 16 Ω
Audio Input AUX
Input sensitivity/Impedance:
LEVEL1: 150 mV/47 kΩ
LEVEL2: 500 mV/47 kΩ
USB: USB Ver. 1.1
Tuner section
FM tuning range: 87.5 MHz – 108.0 MHz
AM tuning range: 530 kHz – 1 710 kHz
CD player section
Dynamic range: 85 dB
Signal-to-noise ratio: 85 dB
Wow and flutter:  Immeasurable
General
Power requirement: AC...

26
Main unit
Remote sensor
15
10–12, 2011, 20
9 9, 22
9, 15 8
13
14 9, 11, 13
UX-G50[J].BOOK  Page 26  Thursday, February 9, 2006  4:11 PM