JVC Ux1 Manual

 
7 
To assemble and connect the AM loop antenna 
To assemble the AM loop antennaTo connect the AM loop antenna  
Make sure to connect the wire correctly.
•If the AM loop antenna wire or speaker cords are covered 
with vinyl, remove the vinyl to expose the tip of the 
antenna by twisting the vinyl.
•Make sure the antenna conductors do not touch any other 
terminals, connecting cords and power cord. Also, keep the 
antennas away from metallic parts of the System, 
connecting cords, and the AC power cord....

 
8 
Before Operating the System 
The indications on the display teach you a lot of things while you are operating the System.
Before operating the System, be familiar with when and how the indicator illuminates on the display.
1 
Disc tray indicators
•1–5: Disc tray number
•: Tray indicator
–Lights when the disc is detected.
–Blinking while playing back a disc.
–Goes off when there is no disc in the tray.
•: Shows the current disc.
2 
QP Link Indicator
•Lights when QP Link is activated.
3 
MP3...

 
9 
Daily Operations 
—Playback
1
 
Turn on the power. 
The STANDBY lamp on the main unit turns off.
•Without pressing STANDBY/ON  , the System 
turns on by pressing one of the source selecting 
buttons in the next step.
2
 
Select the source. 
Playback automatically starts if the selected source is 
ready to start.
•If you press AUX or USB, start playback source on 
the external component.
3
 
Adjust the volume.
4
 
Operate the target source as explained 
later. 
To turn off (stand by) the System
To...

10
Listening to the Radio
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is 
tuned in, the frequency stops changing.
•When you repeatedly press the button, the frequency 
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
To preset the stations
You can preset 30 FM and 15 AM stations.
1Tune in to a...

11
To tune in to a preset station
1
Select a band (FM or AM).
2Select a preset number for the station you store.
Playing Back a Disc
This System can play back the following discs—regular CD 
and CD-R/CD-RW (recorded either in the audio CD or MP3 
format).
•Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with 
the “Compact Disc Digital Audio” standard. Therefore, the 
use of Non-DVD side of a DualDisc on this product may 
not be recommended.
To insert a disc
You can insert...

12
Resume Play for Audio CD/MP3
If you press 7 during playback, the position of the track 
where you stopped playback will be memorized by the 
unit.
By pressing CD 6, you can start playback again 
from the point where you stoppped it.
To activate/cancel resume play
When the source is a CD...
memo
•Changing the disc by pressing the disc selection 
buttons will erase the track number for resume play. 
•To play back from the first track while resume play is 
activated, press 7 twice during playback then...

13
Playing Back from the PC
This System is equipped with a USB terminal on the front 
panel of the main unit. You can connect your PC to this 
terminal and enjoy sound reproduced through your PC. 
When you connect your PC for  the first time, follow the 
procedure below.
 Remember you cannot send any  signal or data to your PC 
from this System.
How to install the USB drivers
1
Turn on your PC and start running WindowsR 98, 
WindowsR 98SE, WindowsR Me, WindowsR 2000, or 
WindowsR XP.
 If the PC has...

 14 Playing Back from other equipment 
To connect other equipment 
By using an stereo mini plug cord (not supplied), you can 
connect equipment with analog audio output jacks such as a 
Digital Audio Player, or a TV, etc.
 
If the audio output on the other equipment is not stereo 
mini plug type,
 
Use a plug adapter to convert the stereo mini plug to the 
corresponding plug of the audio output.
Refer to the manuals supplied with the other equipment. 
To adjust the sound input level from other 
equipment...

15
Daily Operations—Sound & Other Adjustments
Adjusting the Volume
You can adjust the volume level from level 0 (VOL-MIN) to 
level 31 (VOL-MAX).
To drop the volume in a moment
Adjusting the Sound
To emphasize the sound—SOUND TURBO
This function emphasizes the sound.
To reinforce the bass sound
—AHB PRO
You can reinforce the bass sound to maintain rich, full bass 
at low volume.
To adjust the tone—BASS/TREBLE
You can adjust the bass and treble level from 0 to +5.
To adjust the bass
To adjust the treble...

16
Changing the Display Brightness
—DIMMER
You can dim the display window.
Setting the Clock
Without setting the built-in clock, you cannot use the Daily 
Timer (see page 21).
•To exit from the clock setting, press CLOCK/TIMER as 
required.
•To go back to the previous step, press CANCEL.
1Activate the clock setting mode.
•If you have already adjusted the clock before, press the 
button repeatedly until the clock setting mode (see 
page 21) is selected.
2Adjust the hour.
3Adjust the minute.
“CLOCK OK”...