JVC Ux- H330 Manual

8
Common Operations
Setting the Clock
Before operating the unit any further, first set the unit’s clock.
When you plug in the power cord, “0:00” starts flashing on
the display.
You can set the clock when the unit is either turned on or in
standby mode.
On the remote control ONLY:
1Press CLOCK/TIMER.
The hour indication start flashing.
2Press UP or DOWN to adjust
the hour, then press SET.
•When you press and hold UP or
DOWN, the hour indication changes
continuously.
The minute indication starts flashing....

9
Selecting the Source
To select the source, press CD 6, TAPE 2 3, FM/AM, or
AU X .
•When you select CD as the source, playback starts
automatically.
To operate the CD player, see pages 10 to 13.
To operate the tape deck, see page 14.
To operate the tuner (FM or AM (MW)), see pages 15 to 18.
To record on a tape, see pages 19 and 20.
To use an external equipment, see page 18.
Adjusting the Volume
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between...

10
Playing Back the Entire Disc—Normal Play
1Press ) OPEN on top of the unit.
The disc cover opens.
•You can insert a disc while listening to another source.
2Place a disc correctly with its label side up.
3Close the disc cover gently.
4Press CD 6.
The unit automatically turns on and the source
changes to the CD player.
After loading the disc, the first track of the disc
starts playing.
•The disc automatically stops when the last track has
finished playing.
While “READING” appears on the display
You...

11
To remove the disc, press ) OPEN on the unit, then take out
the disc by holding it at the edges while pressing the unit’s
pivot lightly.
•If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
•If no disc is inserted
“NO DISC” appears on the display.
DO NOT open the disc cover by hand as it will be
damaged.
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a...

12
Repeating Tracks—Repeat Play
You can have all the tracks, the program or individual track
currently playing, repeat as many times as you like.
On the remote control ONLY:
Press REPEAT repeatedly before or
during playback.
•Each time you press the button, Repeat Play
changes as follows, and the following repeat
indicators light up on the display:
When playing back audio CD:
 ALL: In Normal Play, repeats all the tracks.
In Program Play, repeats all the tracks in the
program.
 : Repeats one track.
When...

13
RDS MODEREMAIN
Displaying the Remaining Time during
Playback
You can display the remaining time of the current track/disc
and the elapsed time of the current track/disc during playing.
On the remote control ONLY:
Press REMAIN repeatedly.
When playing back audio CD:
•Each time you press the button, the display changes as
follows, and the following remain indicators light up on the
display:
REMAIN: Shows the remaining time of the current
track.
TOTAL REMAIN: Shows the remaining time of the disc.
No...

14
If no cassette is inserted when you press TAPE ¤ ‹
“NO TAPE” appears on the display.
To stop playing, press 7.
To fast-wind to the left or to the right,
press ¢ or 4 (or UP ¢ or
DOWN 4 on the unit).
The tape direction indicator ( 3 or 2 ) starts
flashing rapidly on the display.
To remove the cassette, press PUSH OPEN
on the unit while playback is stopped.
To play both sides—Reverse Mode
You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.
On the remote...

15
Tuning in to a Station
1Press FM/AM to select either “FM”
or “AM (MW).”
The unit automatically turns on and tunes in to
the previously received station—either FM or AM (MW).
•Each time you press the button, the band alternates
between FM and AM (MW).
•If the station previously selected is stored in a preset
number, the preset number will appear instead of “FM”
or “AM (MW).”
2Press and hold ¢ or 4 (or
UP ¢ or DOWN 4 on the
unit) for more than 1 second.
•¢ (UP ¢): Increases the frequencies.
•4 (DOWN 4):...

16
123
456
78
09
OVER
FM/AM
PRESET
GROUP
PRESET
GROUPUP
DOWN
Tuning in to a Preset Station
On the remote control ONLY:
1Press FM/AM to select either “FM”
or “AM (MW).”
The unit automatically turns on and tunes in to
the previously received station—either FM or AM (MW).
•Each time you press the button, the band alternates
between FM and AM (MW).
2Press PRESET GROUP  or
PRESET GROUP 
 repeatedly
to select a preset number.
To tune in to a preset station directly using the number
buttons
On the remote...

17
Searching for Programs by PTY Codes (PTY
Search)
One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
•For details on the PTY codes, see “
Description of the PTY
codes
” on the right column.
•There is a time limit in doing the following steps. If the
setting is canceled before you finish, start over from step 
1.
On the remote control ONLY:
1Press RDS SEARCH repeatedly
until the PTY code you want
appears on the display.
•Each time you press the...