JVC Tm H1950cg Instructions
Have a look at the manual JVC Tm H1950cg Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 313 JVC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

20 SPECIFICATIONS MODEL TM-H1950CG TM-H1750CG TypeColor video monitor Color systemPAL, NTSC (3.58) Picture tube49 cm (19) measured diagonally, 44 cm (17) measured diagonally, 90° deflection, in-line gun, 90° deflection, in-line gun, trio-dot type trio-dot type (phosphor dot-trio pitch 0.27 mm) (phosphor dot-trio pitch 0.27 mm) Effective screen sizeWidth 365.8 mm (14-5/8) Width 327.5 mm (12-7/8) Height 274.3 mm (10-7/8) Height 246.2 mm (9-5/8) Diagonal 457.2 mm (18) Diagonal 407.1 mm (16-1/32) Scanning frequencyH: 15.734 kHz (NTSC), 15.625 kHz (PAL) V: 59.94 Hz (NTSC) 50 Hz (PAL) Horizontal resolution750 TV lines or more (Y/C input mode) Input terminals VIDEO AComposite video: 1 line, BNC connector x 2, 1 V(p-p), 75 Ω, negative sync (bridge connection possible, auto termination) VIDEO BComposite video: 1 line, BNC connector x 2, 1 V(p-p), 75 Ω, negative sync (bridge connection possible, auto termination) Y/C-separated: 1 line, mini-DIN 4-pin connector x 2 Y: 1.0 V (p-p), 75 Ω C (BURST): 0.286 V (p-p), 75 Ω (NTSC) 0.3 V (p-p), 75 Ω (PAL) (bridge connection possible, auto termination) AUDIO A1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance (bridge connection possible) AUDIO B1 line (monaural), RCA pin x 2, 0.5 V(rms), high-impedance (bridge connection possible) REMOTEPoint-of-contact connection, 1 line D-sub connector (15-pin, 3-line) Audio power output1 W Built-in speaker8 cm round x 1, impedance of 8 Ω Environmental conditionsOperation temperature: 5°C – 40°C (41°F – 104°F) Operation humidity: 20 % – 80 % (non-condensing) Power requirements120 V/230 V AC, 50 Hz/ 60 Hz Power consumption1.3 A (120 V AC)/0.9 A (230 V AC) 1.2 A (120 V AC)/0.8 A (230 V AC) DimensionsWidth 440 mm (17-3/8) Width 395 mm (15-5/8) Height 375 mm (14-7/8) Height 334 mm (13-1/4) Depth 496 mm (19-5/8) Depth 418 mm (16-1/2) Weight25.6 kg (56.3 lbs) 20.1 kg (44.3 lbs) (not including input card) (not including input card) AccessoryAC power cord POWER CORD HOLDER x 1 (case and cover) Screw x 2 (POWER CORD HOLDER) * Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly. * Dimensions and weight are approximate. * E. & O. E. Design and specifications subject to change without notice. LCT1025-002B-H(EN)02.6.20, 9:39 AM 22

ENGLISH POWERCHROMAMENUASPECTINPUT SELECTUNDER SCANCOLOR OFFBLUE CHECKPHASETM-H1950CGBRIGHTCONTRASTVOLUME/SELECTABSLOT CD 440 (17-3/8)496 (19-5/8) 485 (19-1/9) 375 (14-7/8) * 380.4 (15) 284.3 (11-1/4) * 375 (14-7/8) 195.5 (7-3/4) 1.5 (1/16) ø20 (7/8)95.7 (3-7/8)336 (13-1/4) 5 (1/4) 5 (1/4) Dimensions < Front View >< Side View > * Asterisks (*) are used to indicate front panel dimensions. Unit : mm (inch) 21 POWERCHROMA MENU ASPECT INPUT SELECTSLOT UNDER SCANCOLOR OFFBLUE CHECK PHASETM-H1750CGBRIGHT CONTRAST VOLUME/SELECT ABCD 395 (15-5/8)418 (16-1/2) 407 (16-1/8) 68 (2-3/4)286 (11-3/8) 3 (1/8)3 (1/8) 336.3 (13-1/4)* 288 (11-3/8) ø20 (7/8) 256 (10-1/8) * 334 (13-1/4) 175 (7) 1.5 (1/16) < Front View >< Side View > * Asterisks (*) are used to indicate front panel dimensions. [TM-H1950CG] [TM-H1750CG] Unit : mm (inch) LCT1025-002A-H(EN)02.4.25, 1:31 PM 23

21 ●To use the SWITCHED OUT terminal, the main power must be ON. (Unlike a bridged output, this connector outputs relocked digital signals.) ●Signal output from the SWITCHED OUT terminal can be changed by selecting INPUT C (SDI 1) or INPUT D (SDI 2). You can use the front panel buttons or do it via external control. ●When INPUT-A or INPUT-B is selected, this terminal outputs the signals last selected. In the standby mode, signals from the SDI 1 connector are output. APPENDIX: CONNECTION EXAMPLES FOR THE SDI INPUT CARD Pin No. Signal 1 GND (Y) 2 GND (C) 3Y 4C Y/C (Mini DIN 4 pin) terminal specification IN Y/C OUT 2 1 2 14 3 4 3 22 LCT1025-002A-H(EN)02.4.25, 1:31 PM 24

VICTOR COMPANY OF JAPAN, LIMITEDPrinted in Thailand 0602-Y-U-JMT © 2002 VICTOR COMPANY OF JAPAN, LIMITED TM-H1950CG/TM-H1750CG COLOR VIDEO MONITOR LCT1025-002B-H(CH)02.6.18, 4:31 PM 25