JVC Tm H1950cg Instructions

BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR
MANUEL D’INSTRUCTIONS : MONITEUR VIDÉO COULEUR
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR

 !"#$%&'(&)
INSTRUCTIONSTM-H1950CG
TM-H1750CG
COLOR VIDEO  MONITOR
ESPAÑOLITALIANOFRANÇAIS
DEUTSCH
ENGLISH


For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.
Retain this information for future reference.
Pour l’usage du client:
Enter ci-dessous le numéro de série qui est situé sur...

ENGLISH
INSTRUCTIONS
COLOR VIDEO MONITOR
TM-H1950CG
TM-H1750CG
Thank you for purchasing this JVC color video monitor. Before using it, read and follow all
instructions carefully to take full advantage of the monitor’s capabilities.
 LCT1025-002A-H(EN)02.4.25, 1:31 PM 3
 

In order to prevent any fatal accidents caused by misoperation
or mishandling the monitor, be fully aware of all the following
precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this
monitor to rain or moisture. Dangerous high voltages
are present inside the unit. Do not remove the back
cover of  the cabinet. When servicing the monitor,
consult qualified service personnel. Never try to service
it yourself.
WARNING : THIS APPARATUS  MUST
BE EARTHED.
PRECAUTIONS
● Use only the power...

ENGLISH
CONTENTS
SAFETY PRECAUTIONS ................................................................................. 2
CONTROLS AND FEATURES ......................................................................... 4
CONTROLS AND FEATURES (INPUT CARD: OPTIONAL) ........................... 7
PREPARATION ................................................................................................. 8

INSTALLING THE INPUT CARD .............................................................. 8

ATTACHING...

Tally lamp
Lights when the tally control signal is ON. The tally control
signal is input through the REMOTE (external control)
remote terminal. For details, refer to Page 18.
Chroma/Phase button
[
 CHROMA/ PHASE]
Press this button to activate the picture color density
adjustment mode or picture hue adjustment mode. Each
time you press the button, the adjustment item changes.
     Picture color density  
f  Picture hue
Adjust the value with the VOLUME/SELECT buttons 
4.
Also used as a control button in...

ENGLISH
Input card slot (SLOT)
Optional input cards can be installed in this slot.  Input
cards are not provided when you purchase this monitor.
REMOTE (external control) terminal
Connect this terminal to an external control unit to enable
remote operation of the monitor.
Refer to the HOW TO USE EXTERNAL CONTROL on
page 18 for more details.
Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals.
The output terminal is bridge-connected.
(The input signal is automatically...

VIDEO AREMOTE
SLOT
AUDIO A
AUDIO B VIDEO B
IN OUT
IN
ININOUT
OUT
INOUT
Y/COUT
2423
25
25
25
REAR VIEW

CONTROLS AND FEATURES (cont’d)
6
Main power switch
Press the switch to turn the main power ON or OFF. When
the main power is ON, the power indicator on the front
panel lights in orange and the monitor enters the stand-by
mode.
I : ON : OFF
AC inlet [AC IN]
Power input connector. Connect the provided AC power
cord 
t to an AC outlet (120 V AC or 230 V AC,
50 Hz/60 Hz).To AC  outlet
(230 V AC,
50 Hz/60...

ENGLISH
Video input/output terminals
Input (IN) and output (OUT) terminals for component
(color deference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT C button
Select RGB signal : press INPUT SELECT D button
Synchronized signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronized...

1. Turn off the Color Video Monitor’s main power and unplug the power cable
from the AC outlet.
2. Unscrew the screws and remove the slot cover from the slot (on the rear side
of the monitor) in which you are going to install the card.
3. Insert the Input Card’s board (green-colored) into the slot, fitting the board into
the guide rails on the top and bottom of the slot.
4. Push the Input Card in so that its front panel touches the monitor’s rear panel.
5. Secure the Input Card by replacing the screws...

ENGLISH
9 1. Attach the Power Cord Holder case to the AC inlet on the back of the monitor with 2 screws
(provided).
2. Attach the Power Cord Holder cover to the AC power cord.
3. Connect the AC power cord to the AC inlet, and join the Power Cord Holder cover with the
case.
ATTACHING THE POWER CORD HOLDER
The provided Power Cord Holder prevents the AC power cord from being accidentally disconnected from the AC inlet.
The Power Cord Holder consists of two parts; a case and cover.
Press the cover until it...