JVC Th V70r Instructions

							48
Changing the VFP setting
The VFP (Video Fine Processor) function enables you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
7During playback
1 Press VFP (PROGRESSIVE).
The current VFP settings appear on the TV.
Example: When “NORMAL” is selected.
2 Press Cursor 3/2 repeatedly to select the
VFP mode.
Each time you press the button, the VFP mode changes
as follows.
“ NORMAL “ CINEMA “ USER 1 “ USER 2
“ (back to the beginning)
•NORMAL:Normally select this.
•CINEMA:Suitable for a movie source.
•USER 1 and USER 2:You can adjust parameters that
affect the appearance of
picture and store the settings.
NOTE:
You cannot adjust “NORMAL” and “CINEMA.”
To adjust USER 1 or USER 2
1 Press VFP (PROGRESSIVE), then press Cursor 3/2
repeatedly to select “USER 1” or “USER 2.”
2 Press Cursor ∞/5repeatedly to select a
parameter you want to adjust.
• Adjust gradually to show preferable appearance by
confirming the picture.
•GAMMA:
Controls the brightness of neutral tints while maintaining
the brightness of dark and bright portions (-4 to +4).
•BRIGHTNESS:
Controls the brightness of the screen (-16 to +16).
•CONTRAST:
Controls the contrast of the screen (-16 to +16).
•SATURATION:
Controls the color depth of the screen (-16 to +16).
•TINT:
Controls the tint of the screen (-16 to +16).
•SHARPNESS:
Controls the sharpness of the screen (+0 to +3).
•Y DELAY:
Controls the color gap of the screen (-2 to +2).
3 Press ENTER.
VFP menu disappears, and the following pop-up window
appears on the TV.
4 Press Cursor 5/∞ repeatedly to change the
setting.
5 Press ENTER.
 The current VFP settings appear again.
6 Repeat steps 2–5 to adjust other parameters.
To return to the normal screen
Press VFP (PROGRESSIVE).
To activate your setting
Press VFP (PROGRESSIVE), then press Cursor 3/2
repeatedly to select “USER 1” or “USER 2.”
NOTE:
The VFP settings disappear if no operations are done for more than
about 10 seconds.
CHANNEL VOLUME TV VOL
DV DVCR 1
AUDIOAUX
ANGLEFM/AM
SUBTITLEDECODE
RETURN DIGEST ZOOM VFP
TOP MENU MENU ZOOM
CONTROL– SUBWOOFER +EFFECT
–     CENTER     +
– 
    REAR-R     +
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE
12 3
45 6
78 9
100+10100+
CATV/DBS
TV AUDIO
VCR
SOUND– +
–     REAR-L     +
PROGRESSIVE
DVDSUPER
VCD
VIDEO
CD
VFP
(PROGRESSIVE)
button
Cursor and
ENTER buttons
+
0 NORMALGAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY+
0
+
0
+
0
+
0
+
3
+
0
+
0GAMMA
+
0GAMMA
+
0 USER 1GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY+
0
+
0
+
0
+
0
+
3
+
0
EN37-50TH-V70[J]B02.3.13, 9:17 PM 48
 
						

							49
Advanced operations
Changing the track order
You can play tracks on a Video CD, SVCD or Audio CD in the
desired order or in random order.
Playing back in the desired order
You can play up to 99 tracks in desired order.
• You may program the same tracks more than once.
7While stopped
1 Press ON SCREEN twice.
The on-screen bar appears on the TV.
2 Press Cursor  3/2  to move  to PROG. in
the on-screen bar, then press ENTER.
The program menu appears on the TV.
• 10 steps appear at a time.
3 Press Number buttons (1-10, +10) to enter a track number you want to program.
Examples:
To select 3, press 3.
To select 14, press +10 then 4.
To select 40, press +10, +10, +10 then 10.
• The total program time is shown on the top of the
program menu.
4 Repeat step 3 to program the next steps.
• Each time you enter a track number in the step at thebottom of the program menu, the next steps appear. To erase a step
Press Cursor 
5/∞  to move 
 to the desired step, then
press STOP.
To program the next steps again, press Cursor  ∞ repeatedly to
move 
 to the blank step, then repeat step 3.
5 Press PLAY.
When playing a VCD or SVCD, the program menu goes off.
Playback starts in the programmed order.
To stop the program playback
Press STOP.
When playing a VCD or SVCD, the pr ogram menu resumes.
• To edit your program, repeat steps 3 and 4.
To clear all steps and quit the program playback
When the program playback is stopped, press ON SCREEN
to turn off the program menu (the on-screen bar appears),
then press STOP.
All steps are cleared and the system quits the program
playback.
The total program time indication on the display window
returns to normal indication.
To turn off the on-screen bar
Press ON SCREEN.
NO TE:
When all of the prog rammed tracks ha ve  been pla yed, the prog ram
pla ybac k stops.
Playing back tracks in random order
7While stopped
1 Press ON SCREEN twice.
The on-screen bar appears on the TV.
2 Press Cursor  3/2  to move  to RND. in the
on-screen bar, then press ENTER.
Playback starts in random order.
To turn off the on-screen bar
Press ON SCREEN.
To quit random playback
Press STOP. Playback stops and random playback mode is
canceled.
NO TES:
• When all tr acks ha ve  been pla yed once , random pla y ends.
• The same tr ack will not be pla yed more than once dur ing random
pla y.
• Dur ing the r andom pla yback, you can skip bac k to the beginning of
the current tr ack b y pressing 
4/REW , but cannot skip bac k to the
tr ac ks that ha ve  been pla yed.
• Dur ing the r andom pla yback, pressing ENTER when  
RND.in the
on-screen bar is selected quits r andom playback mode and
contin ues pla yback in the nor mal order.
AUDIO
CD
SUPER
VCD
VIDEO
CD
Cursor and
ENTER buttons
ON SCREEN
button
AUDIO
CD
SUPER
VCD
VIDEO
CD
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
CATV/DBSCursor and
ENTER buttons
ON SCREEN
button
CHANNEL VOLUME
TV VOL
TUNINGSTOP PAUSE
FF//REW
TV/VIDEO1MUTING¡
RECPLAYDOWN UP
MEMORY STROBE
CONTROL– SUBWOOFER +EFFECT
–     CENTER     +
–  
    REAR-R     +
TEST
SLEEP TV
VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE
12 3
45 6
78 9
100+10100+
CATV/DBS
–      REAR-L     +Number buttons
PROGRAMNo.1
2
3
4
5
6
7
89
10 Total Program Time 00:00:00
PROGRAMNo.1
2
3
4
5
6
7
89
10 3
Total Program Time 00:04:14
PLAY button
STOP button
EN37-50TH-V70[J]B
02.3.13, 9:17 PM
49
 
						

							50
Repeat playback
You can repeat playback of the current title or chapter (for
DVD Video) or track (for Video CD/SVCD/Audio CD).
You can also repeat playback of a desired part.
Repeating a current title, chapter, or
all tracks
7For DVD/Audio CD: During playback or while stopped
For Video CD/SVCD: During playback or while stopped
without PBC function
1 Press ON SCREEN twice.
The on-screen bar appears on the TV.
2 Press Cursor 3/2 to move  to  in
the on-screen bar, then press ENTER.
The following pop-up window appears under the on-
screen bar.
3 Press Cursor ∞/5 repeatedly to select the
repeat mode.
• You can select the repeat modes as follows.
7For DVD
“ CHAPTER “ TITLE “ A-B “ OFF
“ (back to the beginning)
7For Video CD/SVCD/Audio CD
“ TRACK “ ALL “ A-B “ OFF
“ (back to the beginning)
•CHAPTER:The current chapter is played
repeatedly.
•TITLE:The current title is played repeatedly.
•TRACK:The current track is played repeatedly.
•ALL:The all tracks of the disc (or of the
program) are played repeatedly.
•A-B:The selected portion is played repeatedly.
•OFF:Select this to cancel the repeat mode.
NOTES:
•If you select “ALL” during random playback, the all tracks of the
disc are played repeatedly in random order.
•“A-B” cannot be selected during the program and random
playback.
•“A-B” cannot be selected while stopped.
4 Press ENTER.
To turn off the on-screen bar
Press ON SCREEN.
To cancel the repeat playback
Repeat from step 1, select “OFF” in step 3, then press
ENTER.
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE100+
CATV/DBSCursor and
ENTER buttons ON SCREEN
button
DVDAUDIO
CD
SUPER
VCD
VIDEO
CD
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
OFF1/31/3 1/3TIMECHAP.
OFF
DVDAUDIO
CD
SUPER
VCD
VIDEO
CD
Repeating a desired part
You can repeat playback of a desired part by specifying the
beginning (point A) and the ending (point B).
7During playback
1 Press ON SCREEN twice.
The on-screen bar appears on the TV.
2 Press Cursor 3/2 to move  to  in
the on-screen bar, then press ENTER.
The following pop-up window appears under the on-
screen bar.
3 Press Cursor ∞/5 repeatedly to select “A-B.”
4 Press ENTER at the beginning of the part you
want to repeat (point A).
The following display appears in the on-screen bar.
5 Press ENTER at the end of the part you want
to repeat (point B).
A-B repeat playback starts. The selected part of the disc
(between point A and B) is played repeatedly.
To turn off the on-screen bar
Press ON SCREEN.
To cancel the A-B repeat playback
Repeat from step 1, select “OFF” in step 3, then press
ENTER.
NOTE:
While playing back a DVD disc, A-B repeat playback is possible only
within the same title.
A 
B 
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
CATV/DBSCursor and
ENTER buttons ON SCREEN
button
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
OFF1/31/3 1/3TIMECHAP.
OFF
8.5Mbps
A -TIMEC
DVD-VIDEO
EN37-50TH-V70[J]B02.3.13, 9:17 PM 50
 
						

							51
MP3 disc playback
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct
position:
To operate this system, set it to “AUDIO/TV/VCR.”
7What is MP3?
MP3 is an abbreviation of Motion Picture Experts Group 1 (or
MPEG-1) Audio Layer 3. MP3 is simply a file format with a
data compression. By using MP3 format, one CD-R or CD-
RW can contain 10 times as much data volume as a regular
CD can.
7Disc structure
On an MP3 disc, each song (material) is recorded as a file.
Files are usually grouped into a folder. Folders can also
include other folders, creating hierarchical folder layers.
This system simplifies the hierarchical construction of a disc
and manages files and folders by “tracks” and “groups.”
This system can recognize up to 150 tracks per group, and up to
99 groups per disc (up to 14,850 tracks). The system ignores those
exceeding the maximum numbers and cannot play them.
• If there is any type of files other than MP3 files in a folder, those
files are also counted in the total number of 150.
7NOTES for MP3 disc
• MP3 discs (either CD-R or CD-RW) require a longer
readout time. (It differs due to the complexity of the
directory/file configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This system supports “multi-session” discs (up to 5
sessions).
• This system can not play “packet write” discs.
• The system can play MP3 files only with the following file
extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• ID3* tags cannot be shown on the display.
* An MP3 file can contain file information called “ID3 Tag” where
its album name, performer, track title, etc. are recorded. There
are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag
version 2).
• We recommended to record each song (material) at
a samplerate of 44.1 kHz and at a data transfer rate of 128 kbps.
• If both MP3 files and JPEG files are recorded on a disc, set the
MP3/JPEG setting in the PICTURE menu to “MP3.”
(See page 58.)
• Some MP3 discs may not be played back because of their
disc characteristics or recording conditions.
AUDIO/
TV/VCR
CATV/DBS
This system can play MP3 files recorded on a CD-R or CD-RW (MP3 disc).
• Before performing the operation in this section from the remote control, press DVD to use the remote control for the MP3
disc operations.
• Turn on your TV, and select the correct input mode on the TV.
•If “
” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.
Basic operations
Insert an MP3 disc.
Playback starts.
The MP3 control display appears on the TV. (See page 52.)
When all tracks in a group have been played, the system
plays tracks in the next group.
You can perform the following operations.
7To stop playback temporarily
Press PAUSE (or 8 on the center unit).
7To start playback again
Press PLAY (or 3 on the center unit).
7To skip tracks forward
Press FF/¢ or Cursor ∞ (or ¢ on the center unit)
as many times as required.
7To skip to the beginning of the current track
Press 4/REW (or 4 on the center unit) once.
7To skip tracks backward
Press  4/REW or Cursor 5 (or 4 on the center
unit)
 as many times as required.
7To skip groups
Press Cursor 3/2.
To skip groups forward: Press Cursor 3 repeatedly.
To skip groups backward: Press Cursor 2 repeatedly.
7To stop playback completely
Press STOP (or 7 on the center unit).
NOTES:
• The following functions are not available to MP3 disc playback:
Program playback, random playback, repeat playback,
fast-forward/reverse playback, on-screen bar,
and choice menus
• Some tracks on an MP3 disc are skipped and may not be
played back normally.
Group 2
Group 1
Group 3
Group 4 Group 5
Track 1Track 2
Up to 99 groups
Up to 150 tracksPLAY button
FF/¢ button
PAUSE button
STOP button 4/REW
button
CHANNEL VOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
RECPLAYDOWN UP
MEMORY
STROBE
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
CATV/DBSCursor buttons
EN51-54TH-V70[J]B02.3.13, 9:14 PM 51
 
						

							52
NOTES:
• You can also check the playback information on the display window.
Ex.:
• Some group and track names may not be displayed correctly
because of the recording condition.
• The order of groups and tracks on a MP3 disc may be displayed
differently from the order displayed on your personal computer.
7Operations
•To select groups (or skip groups during
playback)
Press Cursor 3/2.
To select the next groups (or skip groups forward):
Press Cursor 3 repeatedly.
To select the previous groups (or skip groups backward):
Press Cursor 2 repeatedly.
•To select tracks (or skip tracks during
playback)
Press Cursor ∞/5.
To select the next tracks (or skip tracks forward):
Press Cursor ∞ repeatedly.
To select the previous tracks (or skip tracks backward):
Press Cursor 5 repeatedly.
NOTE:
Groups and tracks are displayed up to 12 each at once. Pressing
Cursor 
3/2/ ∞/5 repeatedly shows the hidden groups and tracks
one by one.
•To start playback of the selected track
Press ENTER or PLAY.
•To start playback by specifying the track
number
Press Number buttons (0-10, +10) to enter the
track number.
Example:
• To select 3, press 3.
• To select 14, press +10 then 4.
• To select 24, press +10, +10, then 4.
• To select 110, press +10 ten times, then 10.
The entered number appears in the track number
indication, then playback starts from the track you have
specified.
Operations through the MP3
control display
You can search and play the desired groups and tracks
through the MP3 control display.
7MP3 control display
MP3 CONTROL
Group :  01 / 03Time :  00:00:14
Track :  01 / 14 (Total 41)
Blue
Red
GreenCloudy
Fair
Fog
Hail
Indian summer
Rain
Shower
Snow
Thunder
Typhoon
Wind
Winter sky
CHANNEL VOLUME TV VOL
TUNINGFF//REW
TV/VIDEO1MUTING¡
PLAYDOWN UP
CONTROL– SUBWOOFER +EFFECT
–     CENTER     +
– 
    REAR-R     +
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE
12 3
45 6
78 9
100+10100+
CATV/DBS
–     REAR-L     +Number buttons
Cursor and
ENTER buttons
Current group
Group number
indication**Elapsed playing time
of the current track Track number
indication*
Current track
Total track number
on the discCurrent track number
Total track number in the current group
*
01 / 14 (Total 41)
Current group number
Total group number on the disc
**
01 / 03
• The elapsed playing time is shown only during playback.
L
R
Current track number
Elapsed playing time (minutes:seconds) of the
current track  (during playback only)
Current group numberPLAY button
EN51-54TH-V70[J]B02.3.13, 9:14 PM 52
 
						

							53
JPEG disc playback
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct
position:
To operate this system, set it to “AUDIO/TV/VCR.”
7What is JPEG?
A still-picture data compression system proposed by the
Joint Photographic Expert Group, which features small
decrease in image quality in spite of its high compression
ratio.
7Disc structure
On a JPEG disc, each still picture (material) is recorded as a
file. Files are usually grouped into a folder. Folders can also
include other folders, creating hierarchical folder layers.
This system simplifies the hierarchical construction of a disc and
manages folders by “groups.”
This system can recognize up to 150 files per group, and up to 99
groups per disc (up to 14,850 files). The system ignores those
exceeding the maximum numbers and cannot play them.
• If there is any type of files other than JPEG files in a folder, those
files are also counted in the total number of 150.
7NOTES for JPEG disc
• JPEG discs (either CD-R or CD-RW) require a longer
readout time. (It differs due to the complexity of the
directory/file configuration.)
• When making a JPEG disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This system supports “multi-session” discs (up to 5
sessions).
• This system cannot play “packet write” discs.
• The system can play JPEG files only with the following file
extensions: “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any
uppercase and lowercase combination (such as “.Jpg”).
• We recommend to record a file at 640 x 480 resolution. (If a
file has been recorded at a resolution of more than 640 x
480, it will take a longer time to be shown.)
• If both JPEG files and MP3 files are recorded on a disc, set
the MP3/JPEG setting in the PICTURE menu to “JPEG.”
(See page 58.)
• This system can play only baseline JPEG files*. Progressive
JPEG files* or lossless JPEG files* cannot be played.
• Some JPEG discs may not be played back because of their
disc characteristics or recording conditions.
* • Baseline JPEG format: Used for digital cameras, web, etc.
• Progressive JPEG format: Used for web.
• Lossless JPEG format: An old type and rarely used now.
AUDIO/
TV/VCR
CATV/DBS
This system can play JPEG files such as the digital photographs recorded on a CD-R and CD-RW (JPEG disc).
¥ Before performing the operation in this section from the remote control, press DVD to use the remote control for the JPEG
disc operations.
¥ Turn on your TV, and select the correct input mode on the TV.
¥If “
” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.
Slide-show
You can see the still pictures one after another automatically
in the slide-show playback.
Insert a JPEG disc.
The slide-show starts.
Each file (still picture) is shown on the TV for about
3 seconds, then changed to the next file one after another.
When all files in a group have been played, the system play
files in the next group.
You can perform the following operations during the slide-
show playback.
• You can perform the following operations after the still
picture has been shown on the TV thoroughly.
7To stop the slide-show playback temporarily
Press PAUSE (or 8 on the center unit).
7To resume the slide-show playback
Press PLAY (or 3 on the center unit).
7To zoom in or out a still picture
Press ZOOM + or – while the slide-show is
paused. (See also page 47.)
7To skip files forward
Press FF/¢ or Cursor ∞ (or ¢ on the center unit)
as many times as required.
7To skip files backward
Press  4/REW or Cursor 5 (or 4 on the center
unit)
 as many times as required.
Group 2
Group 1
Group 3
Group 4 Group 5
File 1File 2
Up to 99 groups
Up to 150 files
PLAY button
FF/¢ button
PAUSE button
STOP button 4/REW
button
CHANNEL VOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
RECPLAYDOWN UP
MEMORY
STROBE
RETURN DIGEST ZOOM VFP
TOP MENU MENU ZOOM
CONTROL– SUBWOOFER +EFFECT
–     CENTER     +
– 
    REAR-R     +
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE
12 3
45 6
78 9
100+10100+
CATV/DBS
SOUND– +
–     REAR-L     +
PROGRESSIVEZOOM +/–
buttons
Cursor buttons
EN51-54TH-V70[J]B02.3.13, 9:14 PM 53
 
						

							54
Operations through the JPEG
control display
You can search and show the desired groups and files
through the JPEG control display.
7JPEG control display
JPEG CONTROL
Group :  01 / 03 File :  01 / 14 (Total 41)
Anemone fish
Bonito
Butterfly fish
Dolphin
Garden eel
Manta ray
Seal
Swordfish
Tuna
Turtle
Whale
Whale shark Sea
Mountain
Sky
Current group
Group number
indication**File number
indication*
Current file
Total file number
on the disc
Current file number
Total file number in the current group
*
01 / 14 (Total 41)
Current group number
Total group number on the disc
**
01 / 03
7Operations
•To select groups (or skip groups during the
slide-show playback)
Press Cursor 3/2.
To select the next groups (or skip groups forward):
Press Cursor 3 repeatedly.
To select the previous groups (or skip groups backward):
Press Cursor 2 repeatedly.
•To select files (or skip files during the slide-
show playback)
Press Cursor ∞/5.
To select the next files (or skip files forward):
Press Cursor ∞ repeatedly.
To select the previous files (or skip files backward):
Press Cursor 5 repeatedly.
NOTE:
Groups and files are displayed up to 12 each at once. Pressing
Cursor 
3/2/ ∞/5 repeatedly shows the hidden groups and files
one by one.
•To show the selected file only
Press ENTER.
• When the still picture has been shown on the TV screen
thoroughly, you can zoom in or out the still picture. See
page 53.
• If you press PLAY (or 3 on the center unit), the slide-
show playback starts from the selected file.
•To start the slide-show playback by
specifying the file number
Press Number buttons (0-10, +10) to enter the
file number.
Example:
• To select 3, press 3.
• To select 14, press +10 then 4.
• To select 24, press +10, +10, then 4.
• To select 110, press +10 ten times, then 10.
The selected file number appears in the file number
indication, then the slide-show playback starts from the file
you have specified.
•To return to the JPEG control display
Press MENU.
TOP MENU MENU ZOOM
CONTROL– SUBWOOFER +EFFECT
–     CENTER     +
– 
    REAR-R     +
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE
12 3
45 6
78 9
100+10100+
CATV/DBS
SOUND–
–     REAR-L     +
PROGRESSIVE
Number buttons
Cursor and
ENTER buttons MENU button
7To stop the slide-show playback completely
Press STOP (or 7 on the center unit).
The JPEG control display appears on the TV screen.
• For how to operate through the JPEG control display, see
“Operations through the JPEG control display.”
NOTES:
•The following functions are not available to JPEG disc
playback:
Program playback, random playback, repeat playback,
fast-forward/reverse playback, on-screen bar,
and choice menus
•If a black screen continuously appears in the slide-show
playback:
The file currently played may be non-baseline JPEG file.
In this case, select a playable file (a baseline JPEG file)
again. (e.g., pressing STOP or MENU to open the JPEG
control display, etc.)
Note that it may take a long time to select another file.
•Some files on a JPEG disc may be played back
distortedly.
NOTES:
•You can check only the current file number on the display window.
•Some group and file names may not be displayed correctly
because of the recording condition.
•The order of groups and files on a JPEG disc may be displayed
differently from the order displayed on your personal computer.
EN51-54TH-V70[J]B02.3.13, 9:14 PM 54
 
						

							55
You can adjust the initial setting of DVD player according to your preference or needs through the choice menus shown on the TV screen.
Before performing the operations in this section, press DVD on the remote control to change the source to DVD.
• You can also adjust the initial setting through the choice menus when selecting AUX or AUX DIGITAL as the source (except
when an MP3 disc or a JPEG disc is inserted). In this case, the adjustment of front speakers (L/R BALANCE, BASS, and
TREBLE: see page 59) and the adjustment of speaker level (see page 61) take effect for AUX or AUX DIGITAL.
IMPORTANT:
When using the remote control, check to see if its remote
control mode selector is set to the correct position:
To operate this system, set it to “AUDIO/TV/VCR.”
Using the choice menus
You can adjust the initial setting of DVD playback according to your preference or needs through five choice menus.
• You need to turn on your TV and select the correct input mode on the TV.
• You can only use the remote control for the choice menu operations.
• You can change the language used in the choice menus. See page 57.
• You cannot show the choice menus when an MP3 disc or a JPEG disc is inserted.
Choice menus
Setting DVD preferences
: LANGUAGE menu (see page 57)
You can select the initial languages for the disc
menu, audio, and subtitle.
You can also select the language used on the TV
screen while operating this system.: PICTURE menu (see page 58)
You can select the desired options concerning a
picture or monitor screen.
: SPK. SETTING menu (see page 60)
You can make the speaker settings according to
the size and layout of your speakers.
You can also adjust the output level of the
subwoofer, center speaker, and rear speakers.
: AUDIO menu (see page 59)
You can adjust the sound settings of this system
through this menu.
: OTHERS menu (see page 62)
You can change the settings for some of the
functions. To set AV COMPU LINK mode and
Parental Lock, also use this menu.
ENGLISH
ENGLISH
ENGLISH OFF LANGUAGE
MENU LANGUAGE
ON SCREEN LANGUAGE AUDIO LANGUAGE
SUBTITLE
USE             TO SELECT,  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
CENTER
0
0 AUDIO
L/R BALANCE
BASS
TREBLE
LFE ATT.D. RANGE COMPRESSIONOFF
MID
USE             TO SELECT,  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
ON OTHERS
RESUME
ON SCREEN GUIDE
AUTO STANDBYON
OFF
AV COMPULINK MODE
PARENTAL LOCKDVD1
USE             TO SELECT,  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
200 Hz SPK. SETTING
CROSS OVER LEVELSIZEDISTANCE
RETURN TO INITIAL
USE             TO SELECT,  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
4:3LB PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVERAUTO
ON
USE             TO SELECT,  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
MP3 / JPEGMP3
AUDIO/
TV/VCR
CATV/DBS
EN55-66TH-V70[J]B02.3.13, 9:18 PM 55
 
						

							56
Basic procedure through the choice
menus
1 Press CHOICE.
The LANGUAGE menu appears on the TV.
2 Press Cursor 3/2 repeatedly to display one
of the choice menus—LANGUAGE, PICTURE,
AUDIO, SPK. SETTING, or OTHERS.
Each time you press the button, the choice menus
change.
Example: When the PICTURE menu is selected.
3 Press Cursor ∞/5 repeatedly to move  to
the item you want to set up.
Example: When “PROGRESSIVE MODE” is selected.
4 Press ENTER.
The pop-up window, listing the selectable options,
appears on the choice menu.
5 Press Cursor 5/∞ repeatedly to select the
desired option.
Example: When “FILM” is selected.
6 Press ENTER.
Your choice is stored.
To set other items on the same choice menu
Repeat steps 3 to 6.
To move to another choice menu
Press Cursor 2/3 repeatedly to select a CHOICE menu you
want to set up.
To return to the normal screen
Press CHOICE.
NOTE:
Some items in the choice menus consist of sub-menus to set up.
Selecting them and pressing ENTER makes its sub-menu appear on
the TV. You can set them using Cursor 
2/3/5/∞ and ENTER (as
explained in this basic procedure).
TV RETURN
ENTER
ON
SCREEN
CHOICE
AUDIO/
TV/VCR
SURROUNDMODE
FM MODE0100+
CATV/DBS
CHOICE
buttonCursor and
ENTER buttons
ENGLISH
ENGLISH
ENGLISH OFF LANGUAGE
MENU LANGUAGE
ON SCREEN LANGUAGE AUDIO LANGUAGE
SUBTITLE
USE             TO SELECT.  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
4:3LB PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVERAUTO
ON
USE             TO SELECT.  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
MP3 / JPEGMP3
4:3LB PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVERAUTO
ON
USE             TO SELECT.  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
MP3 / JPEGMP3
4:3LB PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVERAUTO
ON
USE             TO SELECT.  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
MP3 / JPEGMP3AUTO FILM VIDEO
4:3LB PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVERAUTO
ON
USE             TO SELECT.  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
MP3 / JPEGMP3AUTO FILM VIDEO
4:3LB PICTURE
MONITOR TYPE
PROGRESSIVE MODE
SCREEN SAVERFILM
ON
USE             TO SELECT.  USE ENTER TO CONFIRM.
TO EXIT, PRESS CHOICE.
ENTER SELECT
MP3 / JPEGMP3
EN55-66TH-V70[J]B02.3.13, 9:18 PM 56
 
						

							57
Setting DVD preferences
LANGUAGE menu
NOTE:
You can select “MENU LANGUAGE,” “AUDIO LANGUAGE,” and “SUBTITLE” only while playback is
stopped.
Items
MENU LANGUAGE
Some DVDs have their own
menus in multiple languages.
• Select the initial language
shown in the menus.
AUDIO LANGUAGE
Some DVDs have multiple audio
languages.
• Select the initial audio
language.
SUBTITLE
Some DVDs have multiple
subtitle languages.
• Select the initial subtitle
language.
ON SCREEN LANGUAGE
Select the language shown on
the TV screen while operating
this system.
Contents and guidelines
ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, and
language codes from AA to ZU (see below)
Note: when the language you have selected is not recorded on a disc, the original
language is automatically used as the initial language.
OFF (no indication of subtitles), ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN,
ITALIAN, JAPANESE, and language codes from AA to ZU (see below)
Note: when the language you have selected is not recorded on a disc, the original
language is automatically used as the initial language.
ENGLISH, SPANISH, and FRENCH
The language codes list
ENGLISH
ENGLISH
ENGLISH OFF LANGUAGE
MENU LANGUAGE
ON SCREEN LANGUAGE AUDIO LANGUAGE
SUBTITLE
SO Somali
SQ Albanian
SR Serbian
SS Siswati
ST Sesotho
SU Sundanese
SV Swedish
SW Swahili
TA Tamil
TE Telugu
TG Tajik
TH Thai
TI Tigrinya
TK Turkmen
TL Tagalog
TN Setswana
TO Tonga
TR Turkish
TS Tsonga
TT Tatar
TW Twi
UK Ukrainian
UR Urdu
UZ Uzbek
VI Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
ZU Zulu
AA Afar
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
BE Byelorussian
BG Bulgarian
BH Bihari
BI Bislama
BN Bengali, Bangla
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
CY Welsh
DA Danish
DZ Bhutani
EL Greek
EO Esperanto
ET Estonian
EU Basque
FA Persian
FI Finnish
FJ Fiji
FO Faroese
FY Frisian
GA Irish
GD Scots Gaelic
GL Galician
GN Guarani
GU Gujarati
HA Hausa
HI Hindi
HR Croatian
HU Hungarian
HY Armenian
IA Interlingua
IE Interlingue
IK Inupiak
IN Indonesian
IS Icelandic
IW Hebrew
JI Yiddish
JW Javanese
KA Georgian
KK Kazakh
KL Greenlandic
KM Cambodian
KN Kannada
KO Korean (KOR)
KS Kashmiri
KU Kurdish
KY Kirghiz
LA Latin
LN Lingala
LO Laothian
LT Lithuanian
LV Latvian, Lettish
MG Malagasy
MI Maori
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA Nauru
NE Nepali
NL Dutch
NO Norwegian
OC Occitan
OM (Afan) Oromo
OR Oriya
PA Panjabi
PL Polish
PS Pashto, Pushto
PT Portuguese
QU Quechua
RM Rhaeto-Romance
RN Kirundi
RO Rumanian
RU Russian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
SG Sangho
SH Serbo-Croatian
SI Singhalese
SK Slovak
SL Slovenian
SM Samoan
SN Shona
EN55-66TH-V70[J]B02.3.13, 9:18 PM 57