JVC Th V70r Instructions

8
Setting the DISP.SET selector
You can place the center unit either vertically (on the supplied stand) or horizontally (without the stand) as illustrated below.
Before installing the center unit, set the DISP. SET selector according to your selection.
• The position of the remote control sensor also changes according to this setting. See page 19.
VIDEO
S-VIDEO
Y
PBPR
VIDEO OUT
ANTENNA
DISP.SETAUX
TO SP-PWV70IN
AC IN AV
COMPU
LINKAMCOAXIAL75AM RLHV
FM
EXT
LOOP
DIGITAL INOPTICAL
COMPONENT
DISP.SET
HV...

9
Getting started
When placing the center unit vertically
When placing the center unit vertically, attach the supplied stand.
1 Connect the cords by passing them through the holes of the stand as illustrated below.
For connections, see pages 10 to 15.
NOTE:
To avoid the interference from other cords, you had better separate three bundles of cords respectively.
2 Attach the stand to the center unit firmly using the supplied screw.
3 Attach the legs to the stand.
NOTE:
Avoid an unstable place when placing...

10
Connections
•Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the component
you are going to connect.
Connecting a TV
To view pictures and on-screen displays, connect a TV to the center unit.
• Connecting to a TV through a VCR, or to a TV with a built-in VCR, may cause distortion of picture.
• You need to set “MONITOR TYPE” in the PICTURE menu correctly according...

11
Getting Started
Connecting the FM and AM antennas
• Make sure the antenna conductors do not touch any other terminals, connecting cords, and power cords. This could cause
poor reception.
7AM loop antenna
VIDEO
S-VIDEO
Y
PBPR
VIDEO OUT
ANTENNA
DISP.SETAUX
TO SP-PWV70IN
AC IN AV
COMPU
LINKAMCOAXIAL75AM RLHV
FM
EXT
LOOP
DIGITAL INOPTICAL
COMPONENT
1
2
3
If the antenna cord is covered with vinyl, remove the
vinyl by twisting it as shown.
7FM antenna
• Turn the loop until you
have the best
reception. If...

12
Connecting the powered subwoofer
Connect the supplied powered subwoofer (SP-PWV70) using the supplied system cord.
• Connect the system cord by matching the 5 marks on the plugs to the ones on the system and powered subwoofer.
Connecting the satellite speakers
VIDEO
S-VIDEO
Y
PBPR
VIDEO OUT
ANTENNA
DISP.SETAUX
TO SP-PWV70IN
AC IN AV
COMPU
LINKAMCOAXIAL75AM RLHV
FM
EXT
LOOP
DIGITAL INOPTICAL
COMPONENT
LEFT
RIGHT LEFT
MAX
REVERSE
NORMALMIN
RIGHT
SPEAKER IMPEDANCE
VOLUME
PHASE
SUB WOOFER
FRONT SPEAKERS...

13
Getting Started
7Connecting the satellite (front, center, rear) speakers
Connect the satellite speakers to the powered subwoofer using the supplied speaker cords.
• Connect the white cord to the red (+) terminal and the black cord to the black (–) terminal.
CAUTION:
•When you do not connect the supplied speakers but connect other (larger) speakers, use the speakers with the SPEAKER IMPEDANCE
indicated by the speaker terminals on the rear panel of the subwoofer.
•DO NOT connect more than one speaker to...

14
Connecting to a digital component
You can enjoy the sound of a digital component such as a DBS tuner or MD recorder through this system. Connect a digital
component using the digital optical cord (not supplied).
NOTES:
When playing a video component such as a DBS tuner:
• To listen to the sound, operate this system. (Select “AUX DIGITAL” as the source to play. See page 22.)
• To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the...

15
Getting started
Connecting the power cord
Make sure that all connections have been made, before plugging the power cords of the center unit and powered subwoofer.
CAUTIONS:
•Disconnect the power cord before cleaning or moving the system.
•Do not touch the power cord with wet hands.
•Do not pull on the power cord to unplug the cord.
When unplugging the cord, always grasp the plug so as not to damage the cord.
NOTES:
• Keep the power cords away from the connecting cords. The power cords may cause noise...

16
When attaching the rear speakers to a wall
Using the supplied speaker wall brackets, you can fix the rear speakers to the wall.
CAUTION: Attaching the brackets to the wall
When attaching the brackets to the wall, have them attached to the wall by a qualified person.
DO NOT attach the brackets to the wall by yourself to avoid an unexpected damage due to their falling from the wall, caused by incorrect
attachment or weakness in the wall.
Location of attachment to wall:
Take care when selecting a...

17
When attaching the center unit to a wall
You can attach the center unit to a wall.
C AUTIONS:  location of atta chment to a wall
•  Take ca re when selecting a location for attaching the center unit  to the wall. \
Inju ry to personnel, or damage to the center
unit, may  result if the center unit is attached in a location which inte rfe res with daily activities, or a location that the us ers
a re liable to knock their bodies or heads against the center unit.
•  A void a location above a bed, sofa,...