JVC Th P5 Instructions

							18
Playback
JPEG file
NOTE
 You can change the time information mode (except for MP3/
WMA/ASF/MPEG-2/MPEG-1/DivX). (See page 22.)
 You can also check the playback information on the TV 
screen. (See page 21.)
7Screen saver
An image may burn in on a TV screen if a static picture is 
displayed for a long time. To prevent this, the system 
automatically dims the screen if a static picture is displayed 
for over 5 minutes (the screen saver function).
 Pressing any button will cancel the screen saver function.
 If you do not want to use the screen saver function, see 
page 32.
You can move back the playback position by 10 
seconds from the current position.
7During playback
On the remote control:
Press .
NOTE
 This function works in the same title.
 This feature may not work for some discs.
7During playback
On the remote control:
Press y or 1.
Each time you press the button, the 
search speed changes (x2, x5, x10, x20, 
x60).
To return to normal speed playback
Press play button for corresponding source (DVD3 or 
USB MEMORY3).
NOTE
 When a DVD VIDEO, DVD VR, VCD, SVCD or ASF/
MPEG-2/MPEG-1/DivX is played back, no sound comes out 
during fast-forward/reverse search.
 When a CD or MP3/WMA is played back, sound is 
intermittent and low during fast-forward/reverse search.
 This feature may not work for some discs/files.
 For MP3/WMA,
 the search speed is not shown. The search speed for DivX is y1, y2, y3 for forward 
search, and 11, 12 and 13 for reverse search.
7Using x / 4 buttons
7For DVD VIDEO/DVD VR 
(chapter): During playback
7For VCD/SVCD (track): During 
playback without PBC function
7For CD/MP3/WMA/JPEG/ASF/
MPEG-2/MPEG-1/DivX 
(track/file): During playback or while stopped
Press x or 4 repeatedly.
NOTE
 When playing back an MP3/WMA/JPEG/ASF/MPEG-2/
MPEG-1/DivX, you can make operations using the file 
control display. (See page 24.)
 This feature may not work for some discs/files.
7Using number buttons on the remote control
7For DVD VIDEO/DVD VR (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
7For VCD/SVCD (track): 
During playback or while stopped without PBC function
7For CD/MP3/WMA/JPEG/ASF/
MPEG-2/MPEG-1/DivX 
(track/file): 
During playback or while stopped
Press number buttons (0-10, h10) to 
select the desired number.
 For details on using the number buttons, see “How to use 
the number buttons” below.
One Touch Replay
Fast-forward/fast-reverse 
search
Group numberFile number File number
Pressing FL DISPLAY
Skip to the beginning of a 
desired selection
How to use the number buttons
To select 3: Press 3.
To select 10: Press 10.
To select 14: Press h10, 1, then 4.
To select 24: Press h10, 2, then 4.
To select 40: Press h10, 4, then 0.
To select 114: Press h10, h10, 1, 1, then 4.
See page 16 for button locations.
THP5-P3[B]-f.book  Page 18  Tuesday, December 27, 2005  3:39 PM
 
						

							19
Playback
While playing back a long file, you can skip 
within the file at about 5-minute intervals.
7During playback
Press Cursor 3/2.
Each time you press the button, the playback position skips 
to the beginning of the previous or next interval.
NOTE
 Intervals are automatically assigned from the beginning of a 
file.
 This feature is available only within the same file.
 This feature may not work for some discs/files.
7During playback or while stopped.
1Press TITLE/GROUP.
“– –” is shown in the title/group 
display area in the display 
window.
Example: During DVD VIDEO playback
2While the display window shows 
“– –”, use number buttons (0-10, 
h10) to enter the desired title or 
group number.
The system starts playback from the first chapter/
track/file of the selected title/group.
 For details on using the number buttons, see “How to 
use the number buttons”. (See page 18.)
NOTE
 When locating a title of a DVD VR disc, PG or PL indicator 
may light on the display window.
 This feature may not work for some discs/files.
.
7During playback or while stopped.
1Press TOP MENU/PG or 
MENU/PL.
The control display is shown on the TV screen, and the 
system starts playback of the first title/playlist.
 The PLAY LIST is shown only when the playlist is on 
the DVD VR disc.
TOP MENU/PG: shows the ORIGINAL PROGRAM.
Example:
*1:Title number
*2: Recording date
*3: Recording source (TV station, the input terminal of 
the recording equipment etc.)
*4: Start time of recording
*5: Title of the original program/playlist (The title may 
not be displayed depending on the recording 
equipment.)
*6: Current title
MENU/PL: shows the PLAY LIST.
Example:
*7:Playlist number
*8: Creating date of playlists
*9: Number of chapters
*10: Total playing time
*11: Current playlist
2Press Cursor Y/5 to select the 
desired title/playlist.
The system starts playback of the selected title/playlist.
To clear the control display
Press ENTER.
Skipping at about 5-minute 
intervals
Locating a desired title/
group using number buttons
Selecting the desired title/
playlist from the control 
display
About the play mode on a DVD VR disc
 Original program (ORIGINAL PROGRAM):
The system can play back the original picture in the 
recorded order.
 Playlist (PLAY LIST):
The system can play back the playlist edited by the 
recording equipment.
See page 16 for button locations.
THP5-P3[B]-f.book  Page 19  Tuesday, December 27, 2005  3:39 PM
 
						

							20
 The icon such as   shows the disc formats or file types 
the operation is available for.
You can enjoy more realistic sound field than a stereo sound 
by using the surround mode.
7Auto Surround (AUTO SUR)
This function automatically selects the appropriate 
surround mode according to the input signals. For example, 
a multichannel source is automatically reproduced in 
multichannel audio.
7Dolby Surround
Dolby Pro Logic II*1
Dolby Pro Logic II has a developed multichannel playback 
format to decode all 2 channel sources — stereo source and 
Dolby Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and 
Music mode:
Pro Logic II Movie (MOVIE)
Suitable for reproduction of Dolby Surround encoded 
sources bearing the mark  .
 Pro Logic II Music (MUSIC)
Suitable for reproduction of any 2 channel stereo music 
sources.
Dolby Digital*
1
Used to reproduce multichannel soundtracks of the 
software encoded with Dolby Digital ( ).
 There are other encoding formats of digital surround 
introduced by Dolby Laboratories, such as Dolby Digital 
EX.
7DTS Digital Surround*2
Used to reproduce multichannel soundtracks of the 
software encoded with DTS Digital Surround ( ).
DTS Digital Surround (DTS) is another discrete 
multichannel digital audio format available on CD and 
DVD software.
 There are other encoding formats of multi-channel 
digital surround introduced by Digital Theater Systems, 
Inc., such as DTS-ES, DTS 96/24. The buttons described below are used on pages 20 to 
30.
Using the surround mode
Cursor
(3/2/Y/5)/
ENTER Number
buttons
Available Surround modes for each input signal
The √ marks show available surround modes.  
*1Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of 
Dolby Laboratories.
*
2“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
*3You can select these modes by pressing SURROUND. (See page 21.)
Mode Surround 
offAuto 
SurroundDolby SurroundDTS Digital 
SurroundDSP
Signal OFF AUTO SUR MOVIE*
3MUSIC*3DOLBY D DTSSTADIUM*3ALL ST*3
Dolby Digital
(Multichannel)√√——√———
Dolby Digital
(2 channel)√√√√——√√
DTS Digital Surround
(Multichannel)√√———√——
DTS Digital Surround
(2 channel)√√√√——√√
Analog or Linear PCM√√√√——√√
Continued on the next page
Advanced operations
THP5-P3[B]-f.book  Page 20  Tuesday, December 27, 2005  3:39 PM
 
						

							21
7DSP
 STADIUM
STADIUM mode adds clarity and spreads the sound, like in 
an outdoor stadium.
 All Channel Stereo
All Channel Stereo (ALL ST) mode can reproduce a larger 
stereo sound field using all the connected (and activated) 
speakers.
All Channel Stereo can be used while reproducing 2 
channel stereo source.
7Indicators on the display window
Digital signal format indicators
LPCM: Lights when Linear PCM signal comes in.
GD: Lights when Dolby Digital signals come in.
C: Lights when DTS Digital (Surround) signals come in.
No indication: No digital signal indicator lights when 
analog signals come in.
Dolby Surround mode indicator
GPLII: Lights when Dolby Pro Logic II mode is activated.
Surround indicator
SURR: Lights when the surround mode is activated.
Source signal indicators, etc.
Light to indicate the incoming signals.
a: Lights when the front left channel 
signal comes in.
b: Lights when the center channel signal comes in.
c: Lights when the front right channel signal comes in.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.
i: Lights when the surround right channel signal comes 
in.
h: Lights when the monaural surround channel signal or 
2 channel Dolby Surround signal comes in.
SW : Always lights.
The channel with “ ” shows that the corresponding 
speakers are reproducing the channels’ sound.
If the channels’ sound decoded into 5.1 channel is 
reproduced, only “ ” lights.
Selecting the surround mode
The system is set up to automatically select the optimal 
surround mode for input signal from digital multichannel 
software.
When playing back a 2 channel source, you can select the 
desired surround mode manually.
NOTE
 This function also takes effect for the sources other than 
DVD.
 For ASF, MPEG-2, MPEG-1 and DivX (except DivX version 
6), the surround mode takes no effects.
7When playing back digital multichannel software 
(except while OFF is selected)
The appropriate multichannel surround mode (Dolby 
Digital, DTS Digital Surround or Linear PCM) is 
automatically selected.
7When playing back a 2 channel source
You can select either Dolby Pro Logic II (MOVIE/MUSIC) 
or the DSP mode.
Press SURROUND repeatedly to 
select the desired mode.
The surround mode is turned on and the current surround 
mode appears on the display window. 
Each time you press the button, the surround mode 
changes.
For details on each mode, see “Available Surround modes 
for each input signal”. (See page 20.)
To turn off the surround mode
Press SURROUND repeatedly until 
“OFF” appears on the display 
window.
Storing adjustments — auto memory
When you turn the power off, the system memorizes the 
current surround mode. The memorized mode is 
automatically recalled when you turn the power on.
You can check disc information and you can use some 
functions using the on-screen bar.
Showing the on-screen bar
7Whenever a disc is loaded
Press ON SCREEN.
Each time you press the button, the on-
screen bar changes as follows on the TV 
screen.
Normal stereo sound All Channel Stereo
Using the on-screen bar
Advanced operationsSee page 20 for button locations.
THP5-P3[B]-f.book  Page 21  Tuesday, December 27, 2005  3:39 PM
 
						

							22
Advanced operations
Example: During DVD VIDEO playback
 The currently selected item shows green.
7Contents of the on-screen bar during playback
DVD VIDEO
DVD VR disc
VCD
SVCD
CD
ASF/MPEG-2/MPEG-1/DivX
AShows disc type.
BShows audio information.
CFor DVD VIDEO: Shows current title number.
For DVD VR: Shows current play mode (PG: for 
Original program, PL: for Playlist) and title number.
DFor DVD VIDEO and DVD VR: Shows current chapter 
number.
For other type of discs: Shows current track number.
EShows time information. See “Changing the time 
information”.FShows playback status.
: appears during playback.
 /  : appears during fast forward/reverse.
 /  : appears during playback in forward slow-
motion/reverse slow-motion.
: appears when paused.
: appears when stopped.
GSelect this to change time information (E). See 
“Changing the time information”.
HSelect this for Repeat Playback. (See page 29.)
ISelect this for time search function. (See page 24.)
JSelect this for chapter search function. (See page 23.)
KSelect this to change audio language, channel, or stream. 
(See page 26.)
LSelect this to change subtitle language. (See page 26.)
MSelect this to change view angle. (See page 25.)
NShows Playback Mode status.
PROGRAM: appears during Program Playback. (See 
page 28.)
RANDOM: appears during Random Playback. (See page 
28.)
OShows Repeat Mode status. (See page 29.)
Changing the time information
You can change the time information in the 
on-screen bar on the TV screen and the 
display window of the center unit.
7During playback
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER repeatedly to select 
the desired information.
Example: When elapsed playing time of disc is selected.
7DVD VIDEO/DVD VR
 TIME: Elapsed playing time of current chapter
 REM: Remaining time of current chapter
 TOTAL: Elapsed time of Title/Program
 T. REM: Remaining time of Title/Program
7VCD/SVCD/CD
 TIME: Elapsed playing time of current track
 REM: Remaining time of current track
 TOTAL: Elapsed time of disc
 T. REM: Remaining time of disc
4Press ON SCREEN.
The on-screen bar disappears.
NOTE
 When playing back DVD VR, “TIME” and “REM” cannot be 
shown.
Dolby D
2/0 . 0chDolby D
2/0 . 0ch
OFF
(The on-screen bar disappears)
(back to the beginning)
See page 20 for button locations.
THP5-P3[B]-f.book  Page 22  Tuesday, December 27, 2005  3:39 PM
 
						

							23
Advanced operations
You can start playing a title, chapter or track you specify. 
You can also play a disc from specified time.
Locating a desired scene from the DVD menu
DVD VIDEOs generally have their own menus 
which show disc contents and you can display them 
on the TV screen. You can locate a desired scene by using 
these menus.
7Whenever a DVD VIDEO is loaded
1Press TOP MENU/PG or MENU/PL.
The menu appears on the TV screen.
Normally, a DVD VIDEO which contains more than 
one title will have a “top” menu which lists the titles. 
Press TOP MENU/PG to show the title menu.
Some DVD VIDEO may also have a different menu 
which is shown by pressing MENU/PL.
See the instructions for each DVD VIDEO regarding 
its particular menu.
2Use Cursor 3/2/Y/5 to select a 
desired item.
3Press ENTER.
 With some discs, you can also select items by entering 
the corresponding number using number buttons.
NOTE
 This feature may not work for some discs.
Locating a desired scene using a VCD/SVCD 
menu with PBC
A VCD or SVCD recorded with PBC has its 
own menus such as a list of contained songs. 
You can locate a specific scene by using these menus. 
7During playback with PBC function
1Press RETURN repeatedly, with 
SHIFT pressed until the menu 
appears on the TV screen.
2Press number buttons (1-10, 
h10) to select the number of the 
desired item.
 For details on using the number buttons, see “How to 
use the number buttons”. (See page 18.)
To return to the menu
Press RETURN, with SHIFT pressed repeatedly until the 
menu screen appears.
When “NEXT” or “PREVIOUS” is shown on the TV 
screen:
 To go to the next page, press x.
 To return to the previous page, press 4.
NOTE
 If you want to play a PBC-compatible VCD/SVCD without 
using the PBC function, perform any of the following:
– Start playback by pressing number buttons while stopped.
– Press x repeatedly until the desired track number is 
displayed, then start playback by pressing DVD 3 (play 
button). The track number appears on the display window 
instead of “PBC”.
 To activate the PBC function when playing a PBC-
compatible VCD/SVCD without using the PBC function, 
perform any of the following:
– Press TOP MENU/PG or MENU/PL.
– Press 7 twice to stop playback, then press DVD 3 (play 
button).
Locating a desired chapter using the on-
screen bar
7During playback
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER.
Example: During DVD VIDEO playback
4Press number buttons (0-9) to 
enter the desired chapter number.
Example:
To select 8: Press 8.
To select 10: Press 1, then 0.
To select 20: Press 2, then 0.
To select 37: Press 3, then 7.
To correct a misentry
Repeat step 4.
Playing from a specified 
position on a disc
Example:
Example:
Dolby D
2/0 . 0ch
See page 20 for button locations.
THP5-P3[B]-f.book  Page 23  Tuesday, December 27, 2005  3:39 PM
 
						

							24
Advanced operations
5Press ENTER.
6Press ON SCREEN.
The on-screen bar disappears.
NOTE
 You can select up to the 99th chapter.
Locating a desired position by specifying the 
time
You can locate a desired position by specifying the time 
from the beginning the disc (while stopped) or the current 
title/track (during playback).
7For DVD VIDEO/DVD VR: During 
playback
7For VCD/SVCD: While stopped or 
during playback without PBC function
7For CD: During playback or while stopped
7When specifying the elapsed playing time from the 
beginning of the disc
Perform the following procedure while stopped.
7When specifying the elapsed playing time from the 
beginning of current title/track
Perform the following procedure during playback.
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER.
4Use number buttons (0-9) to enter 
the time.
You can specify the elapsed playing time from the 
beginning of the disc (while stopped) or from the 
beginning of the current title/track (during playback).
Example: To play back from a point 2 (hours): 34 
(minutes): 08 (seconds) elapsedTo cancel a misentry
Press Cursor 2 repeatedly.
5Press ENTER.
6Press ON SCREEN.
The on-screen bar disappears.
You can search and play desired groups 
and tracks/files using the file control 
display on the TV screen.
Example: When the source is DVD.
*
1(For ASF/MPEG-2/MPEG-1/DivX) The program and 
Random mode are not available.
*
2When the source is USB MEMORY, “USB” appears.
The file control display appears automatically during 
playback (for MP3/WMA) or while stopped.
Dolby D
2/0 . 0ch
Press 2 Press 3
Press 4
Press 8Press 0
Using the file control display
Current group / total 
group number
Current track (file) Track information
(for MP3/WMA only)Playback mode*
1 (PROGRAM, 
RANDOM, REPEAT)
Elapsed playing time of
current track (except for JPEG)
Current track (file) / total track
(file) number on current group
Current group
Total track (file) number
on disc
Playback status *
2
Continued on the next page See page 20 for button locations.
THP5-P3[B]-f.book  Page 24  Tuesday, December 27, 2005  3:39 PM
 
						

							25
Advanced operations
7For MP3/WMA: During playback or while stopped
7For JPEG/ASF/MPEG-2/MPEG-1/DivX: While stopped
1Press Cursor 3/2/Y/5 to select 
the desired group/track/file.
 For MP3/WMA, playback starts from the selected 
track.
 For JPEG, proceed to perform the following 
operation.
2Press play button for 
corresponding source (DVD3 or 
USB MEMORY3) or ENTER.
 Track playback/slide-show starts from the selected 
track/file.
 When you press ENTER for JPEG, only the selected 
file is played back.
To skip the file during playback
Press x/4 or Cursor 5/Y. 
NOTE
 You can also check playback information on the display 
window. (See page 17.)
 Some group, track and file names may not be displayed 
correctly depending on recording conditions.
 The order of groups, tracks, and files may be displayed 
differently from the order displayed on your personal 
computer.
When Resume Playback is set to “ON” (see 
page 33) and you stop playback by the 
following operations, the position where 
playback has been stopped is stored. 
(RESUME indicator lights on the display 
window.)
 Turning off the power (see page 13)
 Pressing 7 once
 Changing the source (see page 14)
To start playback from the stored position
 Press play button for corresponding source (DVD3 or 
USB MEMORY3) on the remote control or 3 (play 
button) on the center unit.
 Select DVD or USB MEMORY as the source again if you 
changed the source.
To clear the stored position
Press 7 again.
 Opening the disc tray or disconnecting the USB mass 
storage class device also clears the stored position.
NOTE
 (For DivX) The beginning of a scene where playback has 
been stopped may be stored.
7During playback of a disc containing multi-view 
angles
When using the ANGLE button:
1Press ANGLE with SHIFT pressed.
Example: The first view angle is selected out of 3 view 
angles recorded
.
2Press ANGLE repeatedly with 
SHIFT pressed, or Cursor Y/5 to 
select the desired view angle.
When using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER.
4Press Cursor Y/5 to select the 
desired view angle.
5Press ENTER.
6Press ON SCREEN.
The on-screen bar disappears.
Resume Playback
Selecting a view angle
Dolby D
2/0 . 0ch
See page 20 for button locations.
THP5-P3[B]-f.book  Page 25  Tuesday, December 27, 2005  3:39 PM
 
						

							26
Advanced operations
7During playback of a disc/file 
containing subtitles in several 
languages
When using the SUBTITLE button:
1Press SUBTITLE.
Example (DVD VIDEO): “ENGLISH” is selected out of 
3 subtitle languages recorded.
2Press Cursor Y/5 to select the 
desired subtitle.
For DVD VR
 Pressing SUBTITLE activates the subtitles 
(subpictures) regardless of whether the subtitles are 
recorded or not. (Subpictures will not change if no 
subpicture is recorded.)
For SVCD
 An SVCD can contain up to four subtitles. Pressing 
SUBTITLE changes the subtitles regardless of whether 
the subtitles are recorded or not. (Subtitles will not 
change if no subtitle is recorded.)
When using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER.
4Press Cursor Y/5 repeatedly to 
select the desired subtitle.
5Press ENTER.
6Press ON SCREEN.
The on-screen bar disappears.
NOTE
 Some subtitle or audio languages are abbreviated in the pop-
up window. See “The language codes list”. (See page 33.)
Each time you press SUBTITLE, the subtitle appears and 
disappears alternately.
 For DivX, you cannot operate this procedure using the on-
screen bar.
7During playback of a disc/file containing 
audio in several languages
When using the AUDIO button:
1Press AUDIO.
Example (DVD VIDEO): “ENGLISH” is selected out of 
3 audio languages recorded.
2Press AUDIO repeatedly or Cursor 
Y/5 to select the desired audio.
When using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2Press Cursor 3/2 to highlight 
.
3Press ENTER.
4Press Cursor Y/5 to select the 
desired audio.
5Press ENTER.
6Press ON SCREEN.
The on-screen bar disappears.
NOTE
 Some subtitle or audio languages are abbreviated in the pop-
up window. See “The language codes list”. (See page 33.) 
 “ST”, “L” and “R” is displayed when playing a DVD VR, VCD 
or SVCD respectively representing “stereo”, “left sound” and 
“right sound”.
 For DivX, you cannot operate this procedure using the on-
screen bar.
Selecting the subtitle
Dolby D
2/0 . 0ch
Selecting the audio
See page 20 for button locations.
THP5-P3[B]-f.book  Page 26  Tuesday, December 27, 2005  3:39 PM
 
						

							27
Advanced operations
Frame-by-frame playback
7During playback
Press 8 repeatedly.
Each time you press the button, the still 
picture advances by one frame.
To return to normal playback
Press play button for corresponding source (DVD3 or USB 
MEMORY3).
Playing back in slow-motion
7During playback
1Press 8 at the point 
where you want to start playback 
in slow-motion from.
The system pauses playback.
2Press SLOW 9.
 Playback in forward slow-motion starts.
For DVD VIDEO only:
 To play back in reverse slow-motion, press SLOW (.
Each time you press the button, the playback speed 
become faster (1/32, 1/16, 1/8, 1/4, 1/2).
To return to normal playback
Press DVD3.
NOTE
 Sound cannot be heard during slow-motion playback.
Zooming in
7During playback or while paused
1Press ZOOM with SHIFT 
pressed.
Each time you repeat the procedure, 
the scene magnification changes.
2While zoomed in, press Cursor 3/
2/Y/5 to move zoom-in area.
To return to normal playback
Press ZOOM repeatedly with SHIFT pressed, to select OFF.
NOTE
 The number of the magnification steps varies depending on 
the disc type.
 During slide-show playback of JPEG, zooming in is not 
available. In such a case, press 8 to pause slide-show 
playback, then zoom in.
 During playback, there may be a case where Cursor (3/2/
Y/5) does not work in step 2.
Changing the VFP setting
The VFP (Video Fine Processor) function 
enables you to adjust the picture character 
according to the type of programming, 
picture tone or personal preference.
7During playback
1Press VFP.
The current VFP settings appear on the TV screen.
Example:
2Press Cursor 3/2 repeatedly to 
select the VFP mode.
 NORMAL: Normally select this.
 CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP 
to complete the setting.
 USER 1 and USER 2: You can adjust parameters that 
affect picture appearance.
Only when selecting “USER 1” or “USER 2” in step 2, 
proceed to perform the following operation;
3Press Cursor Y/5 repeatedly to 
select a parameter you want to 
adjust.
Adjust gradually and confirm picture appearance 
results are as preferred.
 GAMMA: Controls brightness of neutral tints while 
maintaining brightness of dark and bright portions 
(–3 to +3).
 BRIGHTNESS: Controls screen brightness (–8 to 
+8).
 CONTRAST: Controls screen contrast (–7 to +7).
 S AT U R AT I O N :  C ont ro l s  s c r e e n  c ol or  d e pt h  ( – 7  t o  
+7).
 TINT: Controls screen tint (–7 to +7).
 SHARPNESS: Controls screen sharpness (–8 to +8).
4Press ENTER.
Example:
5Press Cursor Y/5 to change the 
setting.
Special picture playback
See page 20 for button locations.
THP5-P3[B]-f.book  Page 27  Tuesday, December 27, 2005  3:39 PM