JVC Th D5 Instructions

18
 
Programing the playing 
order—program play
1
2
Select the desired chapters/
tracks.
•For DVD Video, DVD Audio, 
MP3 and WMA: Enter a title/group 
number, then a chapter/track 
number.*
•For VCD, SVCD and CD: Enter a track number.*
To clear the programs
3
To check the program contents 
To return to normal playback
To program the tracks in the bonus group on a DVD 
Audio disc, perform the “Playing back a bonus group” 
procedure ( 20) before operation.
You can program up to 99 steps.
*
For details on...

19
Changing the language/sound/scene 
angle
For DVD Audio, the functions take effect for the 
moving picture part only.
*
1For DVD VR and SVCD discs, the subtitle indication 
appears and can be changed by performing the above 
procedure even if no subtitles are recorded.
*2Some subtitle or audio languages are abbreviated in the 
pop-up window. See “Language code list” ( 30). 
Special picture playback
To return to normal playback
• While playing back frame by frame or in slow-motion, 
press 3 (play...

20
Adjusting the picture 
quality (VFP)
You can adjust the picture mode.
1
2
Select the desired preset, then finish the setting.
To adjust the picture tone
1Select “USER1” or “USER2” (see above).
2Select a parameter, then confirm the selection.
3Adjust the parameter, then confirm the 
selection.
4Repeat steps 2 and 3 to adjust others.
5
When connecting the TV to the HDMI MONITOR 
OUT terminal ( 7), the VFP setting has no 
effect.
Playing back a bonus group
Some DVD Audio discs have a “bonus group.”
To...

21
Using the on-screen bar
You can use various functions from the on-
screen bar.
Basic operation procedure
1
2
Select the desired item (see the right column), 
then confirm the selection.
After confirming the selection...
•When the pull-down menu appears, select the desired 
item by pressing cursor 5/Y repeatedly, then confirm the 
selection by pressing ENTER.
•When a number-entry box appears, enter the number 
by using the number buttons (0-9), then confirm the entry 
by pressing ENTER.
To correct a...

22
Using the file control 
display 
The file control display appears in the 
following cases.
– Audio files: Always appears.
– Movie and picture files: When TOP 
MENU(/PG/DIRECT) or MENU(/PL) is pressed or 
playback is stopped.
File control display
To play back the desired track/file
Select a desired group/track/file, then start 
playback.
•For JPEG:
–To start a slide-show from the selected file, press 3 
(play button).
–To play the selected file only, press ENTER.
*
1When the source is “DVD,” “FILE”...

23
You can change the settings of the System according 
to your preferences and playing environment. 
1
2
Select the menu.
3Select the item, then confirm.
Repeat this procedure until all the options have been 
confirmed.
To close the setup screen
Set the remote control mode 
before operation.
For disc playback
For playback of a file on a USB 
mass storage class device
SelectConfirm
Language menu (LANGUAGE)
MENU LANGUAGESelect the language for the DVD/DivX menu.See “Language code list” 
( 30) for the code...

24
SPK.SETTING menu is available only when the speaker position mode is set to “S.SPK R” ( 12).
Audio menu (AUDIO)
DOWN MIXThis menu is available only when the speaker position mode is set to “S.SPK F” ( 12).
Select the audio signal output to the TV connected to the HDMI MONITOR OUT terminal.
DOLBY SURROUND: For the TV equipped with Dolby Pro Logic decoder
STEREO
: For ordinary TV
D. RANGE 
COMPRESSIONYou can enjoy powerful audio even at low volume level while playing Dolby Digital software.
AUTO
:...

25
For messages appearing on the display, see 
“Messages shown on the display while listening to 
the XM Satellite Radio” ( 31).
Make sure that you have the following items to enable 
you to listen to the XM Satellite Radio stations:
• The XM Mini-Tuner system—XM Mini-Tuner and XM 
Mini-Tuner Home Dock antenna
• A subscription to XM Satellite Radio
How to subscribe
Hardware and required monthly subscription sold 
separately. Other fees and taxes, including a one-time 
activation fee may apply....

26
To search a channel
While searching, the invalid and unsubscribed 
channels are skipped.
TUNING9/TUNING( are not used to select a XM 
Satellite Radio channel.
To select a channel within the 
category
1Enter the category search mode.
2Select the desired category name, then select the 
channel.
3Exit from the category search mode.
To select a channel number 
directly
1
2
Select the desired channel 
number.
*
*
For details on using the number buttons, 
see “How to use the number buttons” 
( 10). 
You can...

27
Tuning in to a station
You can also tune in to a station automatically. Press 
and hold TUNING9/TUNING( until the station 
search starts. The system tunes in the first station of 
sufficient signal strength found automatically.
You can also tune in to the station by pressing cursor 
5/Y.You can preset 30 FM stations and 15 AM stations.
Storing the preset stations
1Tune in to the station you want to preset.
2
3
Select a preset number, then store the station to 
that number.
• “STORED” appears on the...