JVC Th D5 Instructions

8
Connection using the component 
video jacks
For the BNC connection, use a plug adapter (not 
supplied).
Connection using the S-video or 
composite video jack
, 
Connection for “VIDEO1”—TH-D60
Select “VIDEO1” as the source ( 11) for 
playing a component connected as follows. 
Video connection
No sound signal comes into HDMI VIDEO 1 IN 
terminal. Make audio connection to listen to the 
sound (see the right column).Audio connection
Connecting a digital component
The initial setting for the audio input...

9
Connection for “VIDEO2”—TH-D60
Select “VIDEO2” as the source ( 11) for 
playing a component connected as follows. 
Video connection
*
Connect an external component with the same kind of cable 
as the one used to connect TV. ( 8)
Audio connection
Connecting a digital component
The initial setting for the audio input setting is “OPT.” 
When using COAXIAL jack, change the setting to 
“COAX” before playing back. ( 14)
Connecting an analog component
Select “2CH” as the audio input setting before 
playing...

10
How to use the number buttons
To select 3: Press 3.
To select 10: Press 10.
To select 14: Press h10, 1, then 4.
To select 24: Press h10, 2, then 4.
To select 40: Press h10, 4, then 0.
To select 114: Press h10, h10, 1, 1, 
then 4.
Set the remote control 
mode before 
operation.
Listening with headphones
When the headphones is connected, the System 
automatically deactivates the speakers and cancels the 
surround mode ( 13) temporarily.
• “H.PHONE” appears on the display.
STANDBY lamp:
• Goes off when...

11
Turning the power on or off
To turn off the System by using the sleep timer
To check the remaining time, press the button once.
Selecting the source
To select the source from the center unit
*
1TH-D60 only
*2TH-D50/TH-D5/TH-D4: The FM/AM button is used instead 
of FM/AM/XM.
*3Make sure that the appropriate audio input setting have been 
made for the source (VIDEO1/VIDEO2 or VIDEO). 
( 14)
Adjusting the volume
To turn off the volume instantly
To restore the volume, press the button again, or adjust the...

12
Selecting the speaker position 
mode
Select the speaker position mode according to your speaker 
layout ( 6).
1Turn off the System. ( 11)
2
3
Select the appropriate speaker position mode 
according to your speaker layout ( 6).
As the speaker position mode is changed, the 
following settings are also changed automatically:
– The output level settings of the speakers and 
subwoofer (see below) are initialized.
– The surround mode ( 13) is set to “AUTO 
SUR.”
Adjusting the output level of the 
speakers...

13
Adjusting the bass and treble 
sounds
1
2
Adjust the level.
Using the surround mode
Select one of the available surround 
modes.
•During 2-channel playback with “S.SPK R” speaker 
position mode:
•During multi-channel playback with “S.SPK R” 
speaker position mode:
•During playback with “S.SPK F” speaker position 
mode:
To check the surround mode currently selected, press 
SURROUND once.TH-D60 only:
– When the source is “VIDEO 1” with “5.1CH” 
selected as the audio input setting ( 14), the 
surround...

14
Setting the audio input for 
external components
Set the audio input of the external component for “VIDEO1/
VIDEO2” (TH-D60) or “VIDEO” (TH-D50/TH-D5/TH-
D4).
1
2
TH-D60 only: Select a source you want to set the 
audio input for.
3Select an appropriate audio input according to 
the audio connection. ( 8, 9)
You can select the following settings for each source 
(underlined items are the initial settings for each 
source):
– “VIDEO1”: 5.1CH*
2, COAX*3, and OPT*3
– “VIDEO2”: 2CH, COAX*3, and OPT*3...

15
Playing back a disc
1Select “DVD” as the source. ( 11)
2
3
Place a disc on the tray.
4Start playback.
• JPEG: Slide-show playback starts.
• MP3/WMA/WAV: The file control display appears 
on the TV. ( 22)
Playing back a file on a USB mass 
storage class device
1Connect a USB mass storage class device while 
the System is turned off.
2Turn on the System, then select “USB” as the 
source. ( 11)
Playback starts automatically.
Press 3 (play button) to start playback if the file is not 
played back...

16
DO NOT connect or disconnect the device when the 
System is turned on.
You cannot connect a computer to the USB 
MEMORY terminal of the System.
DO NOT connect the device through a USB hub.
iPod does not play through the USB MEMORY 
terminal. When iPod is connected to the USB 
MEMORY terminal, “RESTRICT” appears on the 
display.
This System may not playback some USB mass 
storage class devices and does not support DRM 
(Digital Rights Management).
Use a USB cable of less than 1 m (3.3 ft) in length....

17
For DVD Video/DVD Audio
1
2
Select the desired item, then confirm the 
selection.
For some discs, you can also select items by using 
the number buttons.
*
TH-D50/TH-D5/TH-D4: The TOP MENU/PG button is used 
instead of TOP MENU/PG/DIRECT.
For VCD/SVCD with PBC 
The Play Back Control function (PBC) allows you 
to operate the VCD/SVCD using menus.
Select the number of the desired 
item while the menu is displayed on 
the TV.
*
• To move to the next or previous page 
of the current menu
• To return to...