JVC Th A75 Instructions

							37
Changing the subtitle and audio
languages
Selecting the subtitle
language
While playing back a DVD (or SVCD) containing the subtitles
in different languages, you can select the subtitle language to
be displayed on the TV.
• The 
icon appears at the beginning of the playback
when the current scene has several subtitles.
• You can set your favorite language as the initial language
(see page 52).
ENGLISH
ENGLISH
1/31/3
AUDIO ANGLE SUBTITLEDECODE
RETURN DIGEST TOP MENU
MENU
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
SOUNDSURROUND
OFF DSP
CENTER
– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7During playback
1Press SUBTITLE.
The pop-up window appears on the TV.
Ex.:“ENGLISH” is
selected out of 3
subtitle languages
recorded.
2Press SUBTITLE or Cursor ∞/5repeatedly
to select the desired subtitle language.
Each time you press the button, the subtitle languages
change.
• The pop-up window goes off if no operation is done for
about 5 seconds.
Using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to , then press ENTER.
The pop-up window appears under the on-screen bar.
3Press Cursor ∞/5 repeatedly to select the
desired subtitle language.
Each time you press the button, the subtitle languages
change.
4Press ENTER.
The pop-up window goes off.
To erase the on-screen bar
Press ON SCREEN.
NOTES:
•For DVD: Some subtitle languages are show by its abbreviation.
See “Language codes list” on page 52.
•For SVCD: Up to four subtitles can be selected. Pressing
SUBTITLE changes the subtitles whether the subtitles are recorded
or not.
Selecting the audio language
When a DVD contains audio languages (soundtrack), you
can select the language (soundtrack) to listen to.
• The 
icon appears at the beginning of the playback
when the current scene has several audio languages.
• You can set your favorite language as the initial language
(see page 52).
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
OFF1/31/3 1/3TIMECHAP.
ENGLISH
AUDIO ANGLE SUBTITLEDECODE
RETURN DIGEST
VFP TOP MENU
MENU
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
SOUNDSURROUND
OFF DSP
CENTER
– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
ENGLISH
ENGLISH
1/31/3
Ex.:“ENGLISH” is selected out of 3 subtitle
languages recorded.7During playback
1Press AUDIO.
The pop-up window appears on the TV.
Ex.:“ENGLISH” is
selected out of 3
audio languages
recorded.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 37
 
						

							38
2Press AUDIO or Cursor ∞/5repeatedly to
select the desired audio language.
Each time you press the button, the audio languages
change.
• The pop-up window goes off if no operation is done for
about 5 seconds.
Using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to , then press ENTER.
The pop-up window appears under the on-screen bar.
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
OFF1/31/3 1/3TIMECHAP.
ENGLISH
AUDIO ANGLE SUBTITLEDECODE
RETURN DIGEST
VFP TOP MENU
MENU
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
SOUNDSURROUND
OFF DSP
CENTER
– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
Ex.:“ENGLISH” is selected out of 3 audio
languages recorded.
3Press Cursor ∞/5 repeatedly to select the
desired audio language.
Each time you press the button, the audio languages
change.
4Press ENTER.
The pop-up window goes off.
To erase the on-screen bar
Press ON SCREEN.
NOTE:
For DVD: Some audio languages are shown by its abbreviation. See
“Language codes list” on page 52.
Selecting the audio channel
When you play some Karaoke VCDs or SVCDs, you can enjoy
karaoke by selecting the audio channel to play.7During playback
1Press AUDIO.
The pop-up window appears on the TV.
ST
ST
STSTEx.: A VCD is
played back.
2Press AUDIO or Cursor ∞/5repeatedly to
select the desired audio channel.
Each time you press the button, the audio channels
change.
• The pop-up window goes off if no operation is done for
about 5 seconds.
For VCD:
ST ]  L ]  R ]  (back to the beginning)
ST: To listen to normal stereo playback.
L: To listen to the L (left) audio channel.
R: To listen to the R (right) audio channel.
For SVCD:
ST 1 ]  ST 2 ]  L 1 ]  R 1 ]  L 2 ]  R 2 ]
(back to the beginning)
ST 1:To listen to normal stereo playback of ST 1.
ST 2:To listen to normal stereo playback of ST 2.
L 1:To listen to the L (left) channel of ST 1.
R 1:To listen to the R (right) channel of ST 1.
L 2:To listen to the L (left) channel of ST 2.
R 2:To listen to the R (right) channel of ST2.
Using the on-screen bar:
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to , then press ENTER.
The pop-up window appears under the on-screen bar.
VIDEO-CDTRACK 4TIME       25:58
OFFSTTIME
ST
PROG.
Ex.: A VCD is played back.
3Press Cursor ∞/5 repeatedly to select the
desired audio channel.
Each time you press the button, the audio channel
changes.
4Press ENTER.
The pop-up window goes off.
To erase the on-screen bar
Press ON SCREEN.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
DVD player operations
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 38
 
						

							39
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
OFF1/31/3 1/3TIMECHAP.CHAPTER      _
Playing from a particular
position
You can start playing a title, chapter, or track you specify.
You can also play a disc from the specified time.
Locating a particular chapter
—Chapter search
When playing back a DVD disc, you can locate the chapter
number to be played.
VFP
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
CENTER– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7During playback
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to CHAP., then press ENTER.
The pop-up window appears under the on-screen bar.
3Press the number buttons (0–9) to enter the
desired chapter number.
Ex.:
To select chapter number 8, press 8.
To select chapter number 10, press 1 then 0.
To select chapter number 37, press 3 then 7.
To correct a mis-entry
Repeat step 3 until the correct number appears in the
pop-up window.
4Press ENTER.
The system starts playback from the selected chapter.
To erase the on-screen bar
Press ON SCREEN.
NOTES:
•You can also use the 10 button to enter “10.”
•The +10 button is not used in this function.
•You can select up to chapter number 99.
Locating a particular position
—Time search
You can start playing at your desired position by specifying
the elapsed playing time from the beginning of the current
title (for DVD), or from the beginning of the disc (for VCD/
SVCD/Audio CD).
VFP
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
CENTER– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7For DVD :During playback
7For VCD/SVCD :During playback without activating
PBC or while stopped
7For Audio CD :During playback or while stopped
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to , then press ENTER.
The pop-up window appears under the on-screen bar.
3Press the number buttons (0–9) to enter the
specified time.
Ex.:
To play back from a point of 2 (hours): 34 (minutes): 08
(seconds) elapsed from the beginning:
Press 2, 3, 4, 0, then 8.
To correct a mis-entry
Press Cursor 2 repeatedly until the wrong number is
erased, then press the number buttons to enter the
correct number.
4Press ENTER.
The system starts playback from the specified time.
To erase the on-screen bar
Press ON SCREEN.
NOTES:
•You can also use the 10 button to enter “0.”
•The +10 button is not used in this function.
•You can specify the time in hours/minutes/seconds for DVD, and in
minutes/seconds for VCD/SVCD/Audio CD.
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
OFF1/31/3 1/3TIMECHAP.TIME   _ : _ _ : _ _
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 39
 
						

							40
Locating a particular scene
—DIGEST
The system can display the opening scene of each title or
chapter on a DVD or each track of a VCD/SVCD.
You can select a desired one from the opening scenes shown
on the TV screen.
CHANNEL/ZOOMVOLUME TV VOL
TUNINGSTOPPAUSE
FF//REW
TV/VIDEO1MUTING¡
PLAYDOWN UP
RETURN DIGEST
VFP TOP MENU
MENU
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
SOUNDSURROUND
OFF DSP
CENTER
– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
O.T.
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7For DVD :During playback or while stopped
7For VCD/SVCD :During playback without activating
PBC or while stopped
1Press DIGEST.
Up to 9 opening scenes are displayed.
•While a DVD is stopped:
The opening scene of each title appears on the TV
screen .
•During DVD playback:
The opening scene of each chapter contained in the
current title appears on the TV screen.
•When a VCD or SVCD is loaded:
The opening scene of each track appears on the TV
screen. The selected
scene
2Press Cursor 3/2/∞/5 to move  to the
desired scene.
• If there are more than 9 scenes, you can go to next page
(see “To show other pages of the digest screen” below).
3Press ENTER.
The system starts playback from the selected scene.
To show other pages of the digest screen
Press FF/¢, to show the next page.
Press 4/REW  to show the previous page.
or
To show the previous page, press Cursor 3/2/∞/5
to select the left top scene, then press Cursor 2.
To show the next page, press Cursor 3/2/∞/5
to select the right bottom scene, then press
Cursor 3.
NOTE:
For some discs, depending on the contents, it may take a time before
all the scenes appear on the TV screen.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
DVD player operations
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 40
 
						

							41
Special picture playback
You can use special picture playback functions including
frame-by-frame, strobe, slow-motion and zoom.
Frame-by-frame playback
7During playback
1Press PAUSE at the point which you want
to view frame by frame pictures.
Playback pauses.
2Press PAUSE repeatedly.
• Each time you press the button, the still picture
advances to the next frame.
To return to normal playback
Press PLAY.
NOTE:
You can perform the above operation using 
8 on the center unit.
Showing continuous still
pictures
7During playback
1Press STROBE at the point you want to
view as continuous pictures.
Playback pauses.
2Press and hold STROBE for more than 1
second.
The same 9 frames (still pictures) appear on the TV
screen.
3Press STROBE once.
The picture in the middle on the top row shows an
advanced frame from the one on the left.CHANNEL/ZOOMVOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
REC
PLAYDOWN UP
MEMORYSTROBE
VFP SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
78 9
100+10100+
– +
– +SURR-LSURR-R S-BACK– +
ADJUST
O.T.
REPLAY
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
Advanced frame
Each press of STROBE advances the frame one by one.
Pressing PLAY instead of STROBE advances each frame
in normal playback speed with a time delay over the
whole 9 frames. (The sound is muted.)
To return to the normal screen
Press and hold STROBE for more than 1 second.
NOTES:
•If you press and hold STROBE for more than 1 second during
playback, 9 pictures also appear but they advance in normal
playback speed with a time delay. (The sound is muted.)
•You can perform the above operation using 
8 on the center unit.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 41
 
						

							42
Playing back in slow-motionZooming in and out
ZOOM  x4 
CHANNEL/ZOOMVOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
REC
PLAYDOWN UP
MEMORYSTROBE
VFP SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
78 9
100+10100+
– +
– +SURR-LSURR-R S-BACK– +
ADJUST
O.T.
REPLAY
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVESet the remote
control mode
selector to
“AUDIO/TV/VCR.”
7During playback
1Press PAUSE at the point where you want to
start slow-motion playback.
The system pauses playback.
2Press ¡ or 1.
• To play back in forward slow-motion playback, press ¡.
• To play back in reverse slow-motion playback, press 1.
Each time you press the button, the playback speed
changes as follows.
Forward:
1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2
Reverse:
1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2
To pause slow-motion playback
Press PAUSE.
To return to normal playback
Press PLAY.
NOTES:
•You cannot listen to the sound during slow-motion playback.
•Reverse slow-motion playback is not possible for VCDs and SVCDs.
CHANNEL/ZOOMVOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
REC
PLAYDOWN UP
MEMORYSTROBE
VFP SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
78 9
100+10100+
– +
– +SURR-LSURR-R S-BACK– +
ADJUST
O.T.
REPLAY
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVESet the remote
control mode
selector to
“AUDIO/TV/VCR.”
7During playback
1Press ZOOM + to zoom in or ZOOM – to
zoom out.
Each time you press ZOOM + or ZOOM –, the
magnification ratio changes as follows.
x 1/8Ox 1/4Ox 1/2O  normal sizeO
x 2Ox 4Ox 8Ox 16Ox 32O
x 64Ox 128Ox 256Ox 512Ox 1024
Ex.: When x4 zoom-in is selected.
2Only when zoomed in: press Cursor 3/2/
∞/5 to move the zoomed-in position .
To return to normal playback
Press ENTER.
NOTE:
While zoomed in, the picture may look coarse.
DVD player operations
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 42
 
						

							43
Changing the VFP setting
The VFP (Video Fine Processor) function enables you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
+
0 NORMALGAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY+
0
+
0
+
0
+
0
+
3
+
0
+
0 USER 1GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY+
0
+
0
+
0
+
0
+
3
+
0
CHANNEL/ZOOMVOLUME TV VOL
TV/VIDEOMUTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
100+10100+ADJUST
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
7During playback
1Press VFP.
The VFP setting screen appears on the TV.
Ex.: When “NORMAL” is selected.
2Press Cursor 3/2 repeatedly to select the
VFP mode.
Each time you press the button, the VFP mode changes
as follow.
NORMAL “ CINEMA “ USER 1 “ USER 2 “
(back to the beginning)
NORMAL:Normally, select this.
CINEMA:Suitable for a movie source.
USER 1, USER 2:You can adjust parameters
affecting the appearance of
picture and also store the
settings (see the right).
To erase the VFP setting screen
Press VFP.
NOTE:
You cannot adjust the picture appearance when selecting “NORMAL”
and “CINEMA.”
7To adjust the appearance of picture
When selecting “USER 1” or “USER 2,” you can adjust the
appearance of picture.
1Press VFP, then press Cursor 3/2
repeatedly to select “USER 1” or “USER 2.”
+
0GAMMA
+
0GAMMA
2Press Cursor ∞/5 repeatedly to select a
parameter you want to adjust.
Adjust the parameters so the picture you are viewing
appears as the way you prefer.
•GAMMA:
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: –4 (darkest) to +4 (brightest)
•BRIGHTNESS:
Adjust this if the picture is bright or dark on the whole.
Available range: –16 (darkest) to +16 (brightest)
•CONTRAST:
Adjust this if the far and near position is unnatural.
Available range: –16 to +16
•SATURATION:
Adjust this if the picture is whitish or blackish.
Available range:  –16 (most blackish) to +16 (whitest).
•TINT:
Adjust this if the human skin color is unnatural.
Available range:  –16 to +16
•SHARPNESS:
Adjust this if the picture is indistinct.
Available range: +0 to +3
•Y DELAY:
Adjust this if the picture looks separately/overlapped.
Available range: –2 to +2.
3Press ENTER.
VFP parameters list disappears, and the following pop-up
window for the selected item appears on the TV.
4Press Cursor ∞/5 repeatedly to change the
setting, then ENTER.
Your adjustment is stored and the current VFP parameters
list appear again.
5Repeat steps 2—4 to adjust other
parameters.
To erase the VFP setting screen
Press VFP.
To activate your setting
Press VFP, then press Cursor 3/2 repeatedly to select
“USER 1” or “USER 2.”
NOTE:
The VFP setting screen disappear if no operation is done for more
than 10 seconds.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 43
 
						

							44
Playing back in the desired
order—Program play
You can play up to 99 tracks in desired order.
• You can program the same track repeatedly.
• This function is not available for DVD.
PROGRAMNo.1
2
3
4
5
6
7
8
9
10Total Program Time 00:00:00Track
PROGRAMNo1
2
3
4
5
6
7
8
9
103
Total Program Time 00:04:14Track
CHANNEL/ZOOMVOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
REC
PLAYDOWN UP
MEMORYSTROBE
CONTROLEFFECT
S.WFR
TEST
SLEEPTV VCR
SETTING
TV RETURN
ENTER
ON
SCREEN
CHOICEFM MODE
12 3
45 6
78 9
100+10100+
SOUND
CENTER– +
– +– +
– +
SURR-LSURR-R S-BACK– +
ADJUST
O.T.
REPLAY
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7While stopped
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to PROG., then press ENTER.
The program screen appears on the TV.
3Press the number buttons (1–10, +10) to
enter a track number you want to program.
Ex.:
To select 3, press 3.
To select 14, press +10 then 4.
To select 40, press +10, +10, +10 then 10.
5Press PLAY.
When playing a VCD or SVCD, the program screen goes
off.
Playback starts in the programmed order.
•Once all of the programmed tracks have been played,
program play stops.
To erase a programmed step
Press Cursor 5/∞ to move 
 to the step you want to erase,
then press STOP.
To program the next steps again, press Cursor ∞ repeatedly to
move 
 to the blank step, then repeat step 3.
To stop the program play
Press STOP.
The program screen appears again.
• To edit your program, repeat steps 3 and 4.
To cancel the program play
Clear the program you made as follows:
1Press STOP to stop playback.
2Press ON SCREEN to appear the on-screen bar.
3Press STOP.
• You can also clear the program by ejecting the disc or
turning off the system.
To erase the on-screen bar
Press ON SCREEN.
Playing back in random
order—Random play
• This function is not available for DVD.
ENTER
ON
SCREEN
CHOICEVFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7While stopped
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to RND., then press ENTER.
Playback starts in random order.
• When all tracks have been played once, random play
stops.
To erase the on-screen bar
Press ON SCREEN.
To stop random play
Press STOP. Playback stops and the random play is
canceled.
NOTES:
•During random play, you can skip back to the beginning of the
current track by pressing 
4/REW, but cannot skip back to the
tracks that have been played.
•During random play, pressing ENTER when 
RND.in the on-screen
bar is selected cancels the random play and starts playing in the
normal order.
Total program time is shown.
4Repeat step 3 to program other tracks.
• Entering a track number in the last step shows the next
step on the screen.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
DVD player operations
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 44
 
						

							45
Repeat play
You can repeat playback of the current title or chapter (for
DVD) or track (for VCD/SVCD/Audio CD).
You can also repeat playback of a particular part.
Repeating title, chapter,
or tracks
A 
B 
8.5Mbps
A -TIMEC
DVD-VIDEO
ENTER
ON
SCREEN
CHOICEVFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
7For DVD :During playback
7For VCD/SVCD :During playback without activating
PBC or while stopped
7For Audio CD :During playback or while stopped
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to , then press ENTER.
The pop-up window appears under the on-screen bar.
3Press Cursor ∞/5 repeatedly to select
repeat play mode.
• Each time you press the button, the repeat play mode
changes as follow.
For DVD:
CHAPTER O  TITLE O  A-B O  OFF O
(back to the beginning)
For VCD/SVCD/Audio  CD:
TRACK O  ALL O  A-B OOFF O
(back to the beginning)
CHAPTER: Repeats current chapter.
TITLE: Repeats current title.
TRACK: Repeats current track.
ALL: Repeats all tracks of a disc.
A-B: Repeats a selected portion (see the right).
OFF: Cancels repeat play.
NOTE:
If you select “ALL” during random play, all tracks of the disc are
played repeatedly in random order.
4Press ENTER.
Repeat play starts.
To cancel repeat play
Repeat from step 1, select “OFF” in step 3, then press ENTER.
To erase the on-screen bar
Press ON SCREEN.
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
1/31/3 1/3TIMECHAP.
OFF
Repeating a particular portion
—A-B repeat
You can repeat playback of a particular portion by specifying
the beginning (point A) and the ending (point B).
ENTER
ON
SCREEN
CHOICEVFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
8.5MbpsDVD-VIDEOTITLE 14TIME  1:25:58CHAP 23
1/31/3 1/3TIMECHAP.
OFF
7During playback
1Press ON SCREEN twice.
The on-screen bar appears on the TV.
2Press Cursor 3/2 repeatedly to move 
to , then press ENTER.
The pop-up window appears under the on-screen bar.
3Press Cursor ∞/5 repeatedly to select
“A-B.”
4Press ENTER at the point where you want
to start repetition (point A).
The following display appears in the on-screen bar.
5Press ENTER at the point where you want
to end repetition (point B).
A-B repeat playback starts. The selected portion
(between points A and B) is plays continuously.
To cancel A-B repeat play
Repeat from step 1, select “OFF” in step 3, then press ENTER.
To erase the on-screen bar
Press ON SCREEN.
NOTES:
•While playing back a DVD disc, A-B repeat play is possible only
within the same title.
•“A-B” cannot be selected during program and random plays.
•“A-B” cannot be selected while stopped.
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN33-45.TH-A75[A]_f02.10.11, 2:55 PM 45
 
						

							46
MP3 disc playback
This system can play MP3 tracks (files) recorded on a CD-R or CD-RW. We call such a disc “MP3 disc” in this manual.
•Before using the remote control, press DVD to change the remote control operation mode for the MP3 disc
operations.
• When playing back an MP3 disc, set “MP3/JPEG” on the PICTURE menu of the choice menu to “MP3” (see page 53).
• Turn on your TV, and select the correct input mode on the TV.
  If “” appears on the TV screen when pressing a button, the disc cannot accept an operation you have tried to do.
7NOTES for MP3 disc
• MP3 discs (either CD-R or CD-RW) require a longer read-
out time. (The time differs depending on the complexity of
the group (folder)/track (file) configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This system supports “multi-session” discs (up to 5
sessions).
• This system can not play “packet write” discs.
• This system can play MP3 files only with the following file
extensions: “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• ID3* tags cannot be shown on the display.
* An MP3 file can contain file information called “ID3 Tag” where
its album name, performer, track title, etc. are recorded. There
are two versions—ID3v1 (ID3 Tag version 1) and ID3v2 (ID3
Tag version 2).
• It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps. This
system cannot play back files recorded at the rate of under
64 kbps.
• If both MP3 files and JPEG files are recorded on a disc, set
the MP3/JPEG setting on the PICTURE menu to “MP3.”
(See page 53.)
• Some MP3 discs may not be played back because of their
disc characteristics or recording conditions.
7 To start playback
Load an MP3 disc, then press PLAY.
The system starts playback.
The following information appears on the display, and the
MP3 CONTROL screen (see page 47) appears on the TV.
CHANNEL/ZOOMVOLUME TV VOL
TUNINGSTOP
DIMMERPAUSE
FF//REW
TV/VIDEO1MUTING¡
REC
PLAYDOWN UP
MEMORYSTROBE
ENTER
ON
SCREEN
CHOICE
O.T.
REPLAY
VFP
AUDIO/
TV/VCR
CATV/DBS
PROGRESSIVE
To stop playback temporarily
Press PAUSE (or 8 on the center unit).
To start playback again, press PLAY (or 3 on the center unit).
To skip groups forward
Press Cursor 3.
To skip groups backward
Press Cursor 2.
To skip tracks forward
Press FF/¢ or Cursor ∞ (or ¢ on the center unit) as many
times as required.
To skip to the beginning of the current track
Press 4/REW (or 4 on the center unit) once.
To skip tracks backward
Press 4/REW or Cursor 5 (or 4 on the center unit) as
many times as required.
 To stop playback completely
Press STOP (or 7 on the center unit).
L
S.WFRR
MP3
Basic operation
NOTES:
• The following functions are not available for MP3 disc
playback:
Program play, random play, repeat play,
fast-forward/reverse playback, and using on-screen bar
and choice menus
• Some tracks on an MP3 disc are skipped and may not be
played back normally.
From the remote control ONLY:
MP3 indicator
Current track number
Current group
numberElapsed playing time
of the current track
Set the remote
control mode
selector to
“AUDIO/TV/VCR.”
EN46-49.TH-A75[A]_f02.10.11, 2:56 PM 46