JVC Th A30 Instructions

							28
Basic Disc Operations
To start playback
Press 3/8.
The source is automatically changed to the
DVD player.
“WAIT” appears on the display for a while,
then the detected disc type appears—DVD, VCD, CD, or MP3. (If
your TV is turned on, the mark corresponding to the detected disc
type appears on the TV screen.)
•When a disc is not loaded, “NO DISC” appears on the display.
Disc play starts from the first chapter or track of the selected disc.
•If a menu appears while playing a DVD or VCD with PBC
function, see “Disc Menu-Driven Playback” (for DVD) on page 31
or “Disc Menu-Driven Playback (Only for VCD)” on page 38.
Note:
If “WRONG PARENTAL CODE” appears on the TV screen, Parental
Lock is in use. You cannot play back a DVD containing violent scenes
or those not suitable for your family members.
To play back such a disc, cancel the Parental Lock. (See page 52.)
To stop playback for a moment
Press 3/8.
While pausing, minute and second digit
 of elapsed playing time flashes on the display.
•To resume play, press 3/8 again.
To go to another chapter or track
Press ¢ or 4 repeatedly during playback.
•¢: Skips to the beginning of the next or succeeding chapter or
track.
•4:While a DVD,  a VCD with PBC or MP3 is played back
Goes back to the beginning of the previous chapter or track.
While a CD or a VCD without PBC is played back
Goes back to the beginning of the current or previous track.
To go to another title (only possible on a DVD)
or track (only possible on a CD and VCD)
directly using the number buttons
Pressing the number buttons before or during play allows you to
start playing the title/track number you want. (If your TV is turned
on, the on-screen bar is pulled down automatically on the TV
screen.)
•To select number 1 to 9, press the corresponding number button
(then press ENTER or wait for 5 seconds).
•To select number 15, press 1, 5.
•To select number 23, press 2, 3.
To stop during playback
Press 7.
(If your TV is turned on, “
 STOP” appears
on the TV screen.)
•When an MP3 disc is played back, playback
stops completely.
•This system can memorize the end point even when you press 7.
When you start playback again by pressing 3/8, playback begins
from where it has been stopped—Resume play.
•To stop completely, press 7 twice. (“7 STOP” appears on the TV
screen.) The disc type appears on the display.
The DVD player goes on working for 3 minutes after playback
stops.
To remove the disc
Press 0 on the front panel.
The disc tray comes out.
To close the disc tray, press 0 again.
•If you do not press the button, the disc tray closes
automatically 3 minutes after.
TUNER PRESET
TUNER PRESET
TUNER PRESET
DISPLAY
B.SEARCH DOWN
REWUP
FF
F.SEARCH STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TV STANDBY/ON
AUDIO
VCR
VCR 
CONTROL
TUNER PRESET
ENTER
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
PROGRESSIVE
7
3/8 ¢ 4
Title No. Elapsed playing 
time Chapter No.
Track No.
Elapsed playing 
time
Track No.
Elapsed playing 
time
Playback information on the display
DVD
VCD/CD
MP3
SVCD can be operated by using the VCD operation
procedure.
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 28
 
						

							29
DVD Playback
ANGLE
DISPLAY
B.SEARCH DOWN
REWUP
FF
F.SEARCH
RETURN STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENUTV STANDBY/ON
AUDIO
VCR
VCR 
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
MUTING
123
456
789
0
REMAIN
PROGRAM
D.R.C ZOOMSETUP
PROGRESSIVE
DSP MODE
SLEEP
TEST PRO LOGICSETTINGSOUND
CLEAR REPEATANGLESLOW
SEARCH A-B REPEAT
123
456
789
0
AUDIO/
FM MODESUBTITLE
3
3
3
Some DVDs contain several audio languages, subtitles, and multi-
angle views.
When you find the following marks on the DVD or its package, you
can select these elements recorded on the DVD.
Subtitles are recorded on the disc. The number
inside the mark indicates the total number of the
recorded subtitles.
Several audio languages are recorded on the disc.
The number inside the mark indicates the total
number of the recorded audio languages.
Multi-angle views are recorded on the disc. The
number inside the mark indicates the total number
of the recorded multi-angle views.
If you cannot find out whether your disc contains these features
listed above, you can check it by showing the on-screen bar.
For basic disc operations such as inserting a disc, starting
playback, and moving to another chapters, see “Basic DVD
Operations” on pages 12, 13, and “Basic Disc Operations” on
page 28.
1:Disc type
DVDVCD SVCD CD MP3
2:Current title and total number of the titles on the
disc
•Ex.: 1st title is playing out of 3 titles recorded.
3:Current chapter and total number of the chapters
in the current title
•Ex.: 1st chapter is playing out of 5 chapters recorded.
4:Elapsed playing time or remaining time
You can change the play time indication  by pressing
REMAIN. See page 31 for more details.
5:Subtitle language indication
•Ex.: When no subtitle is recorded on the disc.
See page 30 for more details.
6:Audio language indication
•Ex.: Original sound (default) is selected out of 3 audio
languages recorded. See page 30 for more details.
7:Signal format indicator
•Signal format type—Linear PCM (stereo), Dolby Digital,
and DTS Digital Surround—will be indicated.
Ex.: When the disc is encoded with Dolby Digital.
8:Repeat mode indicator
•Ex.: When repeat mode is turned off.
See page 33 for more details.
9:Multi-angle view indicator
•Ex.: When only a single angle-view is recorded on the
disc. See page 30 for more details.
Showing the On-Screen Bar
You can show the following information on the TV screen while a
disc is loaded.
From the remote control ONLY:
Press DISPLAY.
•Each time you press the button, the following on-
screen bar appears in sequence.
1
5678923 4
On-screen bar goes off.
DISPLAYDISPLAY
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 29
 
						

							30
Selecting the Audio Languages
While playing back a DVD containing audio languages (sound
track), you can select the language (sound track) to listen to.
•You can set your favorite audio language as the initial audio
language. (See page 49.)
Press AUDIO/FM  MODE.
The on-screen bar appears on the TV screen for a while.
•Each time you press the button, the audio language
changes as follows:Ex.: When the disc has 3 multi-angle views Ex.: When the disc has 3 selections—English,
French, Spanish and no subtitle (OFF)
ANGLE         3
ANGLE         1ANGLE         2
Ex.: When the disc has 3 selections—English,
French, and Spanish
Selecting the Subtitles
While playing back a DVD containing subtitles in different
languages, you can select the subtitle to be displayed on the TV
screen.
•You can set your favorite subtitle language as the initial language
shown on the screen. (See page 49.)
From the remote control ONLY:
Press SUBTITLE.
The on-screen bar appears on the TV screen for a while.
•Each time you press the button, the subtitle language
changes as follows:SUBTITLE
DEF 1/3 1/1OFF  /3
OFF   /3ENG 1/3
SPA 3/3FRE 2/3
ENG 1/3FRE 2/3
SPA 3/3
ENG 1/3 1/1ENG 1/3
AUDIO/
FM MODE
ANGLE
1/32/3
3/3
Selecting the Multi-Angle Views
While playing back a DVD containing multi-angle views, you can
view the same scene at different angles.
• When you play back the DVD containing multi-angle views, 
appears on the TV screen.
From the remote control ONLY:
Press ANGLE.
•Each time you press the button, the view angle changes.
Note:
When the on-screen bar is shown on the TV screen, Multi angle view
indication also changes as follows:
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 30
 
						

							31
DVD Playback
TOP MENUMENURETURN MUTING
TOP MENUMENU RETURN MUTING
ENTER
Disc Menu-Driven Playback
Disc menu-driven playback is possible while playing back a DVD
with menu (menu may be still pictures or moving pictures
depending on the disc).
•When operating a disc using the disc menu, refer also to the
instructions supplied for the disc.
DVD discs generally have their own menus or title lists. A menu
usually contains various information about the disc and playback
selections. On the other hand, a title list usually contains titles of
movies and songs recorded.
From the remote control ONLY:
1Press MENU or TOP
MENU.
A menu or title list will appear
on the screen.
“MENU” appears on the display.
•On some DVDs, a menu will
automatically appear on the
screen after playback starts.
2Select a desired item on the
menu or on the title list, using
3/2/5/∞ and ENTER.
The unit starts playback of the selected
item.
•On some discs, you can also select items
by pressing the number buttons
corresponding to the item numbers
listed.
Checking the Remaining Time
While playing back a DVD, you can check the remaining time to be
played back.
From the remote control ONLY:
Press REMAIN.
The on-screen bar and the current play time indication
appear on the TV screen for a while.
•Each time you press the button, the following indication appears
on the screen:
REMAIN TIME:TITLE
: Select this to show the remaining time of the current title.
CHAPTER TIME
: Select this to show the elapsed playing time of the current
chapter.
REMAIN TIME:CHAPTER
: Select this to show the remaining time of the current chapter.
TITLE TIME
: Select this to show the elapsed playing time of the current title.
TITLE TIME
CHAPTER TIME
REMAIN TIME:CHAPTERREMAIN TIME:TITLE 
REMAIN
3/2/5/∞
ENTER
TOP MENU
DISPLAY
B.SEARCH DOWN
REWUP
FF
F.SEARCH
RETURN STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENUTV STANDBY/ON
AUDIO
VCR
VCR 
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
MUTING
123
456
789
0
REMAIN
PROGRAM
D.R.C ZOOMSETUP
PROGRESSIVE
DSP MODE
SLEEP
TEST PRO LOGICSETTINGSOUND
CLEAR REPEATANGLESLOW
SEARCH A-B REPEAT
123
456
789
0Number
buttons
CLEARREMAINMENU
SEARCH 1
¡
English
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 31
 
						

							32
Searching for a Particular Point
You can search for a particular point while playing a disc—Va r i a b l e
Speed Forward/Reverse Search.
•No sound comes out during Variable Speed Forward/Reverse
Search.
To fast-forward the chapter—Variable Speed
Forward Search
From the remote control ONLY:
Press ¡ during playback or pause.
•Each time you press the button, the search speed
changes as follows:
To reverse the chapter—Variable Speed Reverse
Search
From the remote control ONLY:
Press 1 during playback or pause.
•Each time you press the button, the search speed
changes as follows:
To resume normal play
Press 3/8.
PLAY (Back play)
x2x4
x8
PLAY (Normal play)
x2x4
x8
B.SEARCH
TUNER PRESET
F.SEARCH
Moving to a Particular Portion Directly
You can move to another title, chapter, or particular scene in the
chapter directly.
From the remote control ONLY:
1Press SEARCH during playback or pause.
•Each time you press the button, the following
indication appears on the screen:
TITLE – –: Select this to move to another title.
CHAPTER – – –: Select this to move to another chapter.
TIME – –: – –: – –: Select this to move to a particular scene.
2Press the number buttons to
select a desired title, chapter,
or playing time.
The unit starts playback of the selected
item. (The on-screen bar appears for a
while.)
How to input the title and chapter number
Press the number buttons corresponding to the number, then wait
for about 5 seconds or press ENTER to start playback.
•To select number 5, press 5, then ENTER.
•To select number 12, press 1, 2, then ENTER.
•To select number 22, press 2, 2, then ENTER.
How to input the playing time
Press the number buttons to input the playing time, then wait for
about 5 seconds or press ENTER to start playback at the selected
elapsed playing time.
•To input time “00:45:23,” press 4, 5, 2, 3.
•To input time “01:23:45,” press 1, 2, 3, 4, 5.
•To cancel a mis-entry, press CLEAR.
Each time you press the button, the last entry will be erased.
Note:
When you want to move to another title directly, you can move to it by
simply pressing the corresponding number buttons (without pressing
SEARCH in step 
1).
Canceled
TITLE – –
TIME – – : – – : – – CHAPTER – – –
SEARCH
123
456
789
0
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 32
 
						

							33
DVD Playback
Repeating Playback
Repeat play cannot be used in the following cases:
•When you enjoy program play
7 Repeat Play
From the remote control ONLY:
Press REPEAT repeatedly.
The indication corresponding to the selected mode appears
on your TV.
•Each time you press the button, Repeat mode changes as follows:
REPEAT:CHAPTER: Current chapter will be repeated.
REPEAT:TITLE: Current title will be repeated.
REPEAT OFF: Repeat play is canceled. (Normal play
is resumed.)
Note:
When the on-screen bar is shown on the TV screen, Repeat mode
indication also changes as follows:
Example:
REPEAT A
REPEAT A–B
REPEAT:CHAPTERREPEAT:TITLE
REPEAT OFF
REPEAT
REPEAT:CHAPTER REPEAT:TITLE
REPEAT OFF
From the remote control ONLY:
1Press A–B REPEAT to select the start
point.
“REPEAT A” appears on the display.
2Press A–B REPEAT again to select the
end point.
“REPEAT A” changes to “REPEAT A–B,” then
A–B repeat begins.
The unit automatically locates point A and starts repeated
playback between points A and B.
To cancel A–B Repeat
Press A–B REPEAT again.
“REPEAT A–B” goes off from the display.
Note:
When the on-screen bar is shown on the TV screen, Repeat mode
indication also changes as follows:
On some DVDs, A–B Repeat may not be used even within the
same title. This is due to their disc structures, and not a
malfunction of the unit.
A-B REPEAT
A-B REPEAT
A-B REPEAT
7 A–B Repeat
While playing, you can also select a portion you want to repeat.
•A–B repeat is not performed between different titles.
•An interval of more than 5 seconds is required between point A
and point B.
2 3
ENTER
REPEAT
A-B REPEAT
DISPLAY
B.SEARCH DOWN
REWUP
FF
F.SEARCH
RETURN STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENUTV STANDBY/ON
AUDIO
VCR
VCR 
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
MUTING
123
456
789
0
REMAIN
PROGRAM
D.R.C ZOOMSETUP
PROGRESSIVE
DSP MODE
SLEEP
TEST PRO LOGICSETTINGSOUND
CLEAR REPEATANGLESLOW
SEARCH A-B REPEAT
3/8
PROGRAM 7
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 33
 
						

							34
Programming the Playing Order of the
Chapters—Program Play
You can arrange the chapter playback order before you start playing.
You can program up to 20 steps.
•Before making a program, make sure that the TV is turned on
and the correct input is selected on the TV.
From the remote control ONLY:
1Load a disc.
•If the current playing source is not the DVD player, press
3/8, then 7 before going to the next step.
2Press PROGRAM.
The PROGRAM MENU screen appears on the TV
screen.
•“PROGRAM” appears on the display.
3Press ENTER.
4Press 3 or 2 to select a title
number, then ENTER.
•3 : Increases the number.
•2 : Decreases the number.
•You can also select a title number
using the number buttons. Title numbers you can select in the next step
Chapter numbers you can select in the
next step
   PROGRAM   MENUSELECT: ENTER
 
   TITLE  CHAPT
  1    – –        – –
  2    – –        – –
  3    – –        – –
  4    – –        – –
  5    – –        – –
  
  PREVIOUS    TITLE  CHAPT
  6    – –        – –
  7    – –        – –
  8    – –        – –
  9    – –        – –
10    – –        – –
  
      NEXT
      
PLAY: 3FINISH: PROGRAM
5Press 3 or 2 to select a chapter number, then
ENTER.
•3 : Increases the number.
•2 : Decreases the number.
•
You can also select a chapter number using the number buttons.
•To select all chapters in the selected title as one program
step, simply press ENTER without selecting any number.
“ALL” appears on the chapter number position.
6Repeat steps 3 to 5 to program other chapters
you want.
•After 10 steps are programed, “NEXT «” is selected
(highlighted). If you want to program more steps, press
ENTER.
7Press 3/8.
The chapters are played in the order you
have programed and the PROGRAM
indicator lights up.
After all the chapters you programed are played back, the
PROGRAM MENU screen appears on the TV screen again.
SELECT: ENTER
 
   TITLE  CHAPT
  1       2           8
  2    ––       ––
  3    ––       ––
  4    ––       ––
  5    ––       ––
  
  PREVIOUS    TITLE  CHAPT
  6    ––       ––
  7    ––       ––
  8    ––       ––
  9    ––       ––
10    ––       ––
  
      NEXT
FINISH: PROGRAM
   PROGRAM   MENU
PLAY: 3PROGRAM
ENTER
TUNER PRESET
SELECT: ENTER
 
   TITLE  CHAPT
  1    ––       ––
  2    ––       ––
  3    ––       ––
  4    ––       ––
  5    ––       ––
  CHOOSE :   1–5
  PREVIOUS    TITLE  CHAPT
  6    ––       ––
  7    ––       ––
  8    ––       ––
  9    ––       ––
10    ––       ––
  
      NEXT
      
FINISH: PROGRAM
   PROGRAM   MENU
PLAY: 3
SELECT: ENTER
 
   TITLE  CHAPT
  1    –2        ––
  2    ––       ––
  3    ––       ––
  4    ––       ––
  5    ––       ––
  CHOOSE :   1–9
  PREVIOUS    TITLE  CHAPT
  6    ––       ––
  7    ––       ––
  8    ––       ––
  9    ––       ––
10    ––       ––
  
      NEXT
      
FINISH: PROGRAM
   PROGRAM   MENU
PLAY: 3
   PROGRAM   MENU
ENTER
To stop during playback
Press 7 or PROGRAM on the remote
control.
The PROGRAM MENU screen appears on
the TV screen.
•If you press 3/8 while this screen is shown, the unit starts
program play.
SELECT: ENTER
 
   TITLE  CHAPT
  1     2         8
  2     1         5
  3     1        1 7
  4     3         6
  5     4         2
  PREVIOUS    TITLE  CHAPT
  6     2         2
  7     2        1 2
  8     1         9
  9    ––       ––
10    ––       ––
  
      NEXT
      
FINISH: PROGRAM
   PROGRAM   MENU
PLAY: 3
TUNER PRESET
TO BE CONTINUED ON THE NEXT PAGE
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 34
 
						

							35
To erase the stored program
Press 0 to eject the disc.
•If you turn off the system or change the source, the
program is also erased.
To check the program contents
You can check the program contents by pressing PROGRAM.
The PROGRAM MENU screen appears on the TV screen.
•If you press the button during playback, the program play will
stop.
To modify the program
You can modify the program while the PROGRAM MENU screen is
shown on the TV screen.
•To erase a step: Press ∞ (or 5) to select (highlight) an unwanted
program step, then press CLEAR.
•To modify a step: Press ∞ (or 5) to select (highlight) a program
step you want to modify, then perform steps 
3 to 5 on page 34.
(Before entering a new number, press CLEAR repeatedly until
“– –” appears on the number entry position.)
•To add a step: Press ∞ (or 5) to select (highlight) an empty
program step, then perform steps 
3 to 5 on page 34.
•To move to program step 10 from program step 11, press 5
when program step 11 is selected (highlighted) so that
“PREVIOUS »”  is selected (highlighted). Then, press ENTER.
•To move to program step 11 from  program step 10, press ∞
when program step 10 is selected (highlighted) so that “NEXT
« ” is selected (highlighted). Then, press ENTER.
3/2/5/∞
ENTER
CLEARZOOM3/8
PROGRAM
DISPLAY
B.SEARCH DOWN
REWUP
FF
F.SEARCH
RETURN STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENUTV STANDBY/ON
AUDIO
VCR
VCR 
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
MUTING
123
456
789
0
REMAIN
PROGRAM
D.R.C ZOOMSETUP
PROGRESSIVE
DSP MODE
SLEEP
TEST PRO LOGICSETTINGSOUND
CLEAR REPEATANGLESLOW
SEARCH A-B REPEAT
STEP
SLOW
To exit from program play
From the remote control ONLY:
Press PROGRAM.
The PROGRAM MENU screen goes off, and the
opening screen appears. (The program you made is still
kept in memory.)
•If you press 3/8 while this screen is shown, the unit starts normal
playback.
DVD/Video CD/CD PLAYER 
PROGRAM
DVD Playback
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 35
 
						

							36
DVD Special Effect Playback
7 Still Picture/Frame-by-Frame Playback
You can advance the still picture frame by frame while playing a
DVD.
From the remote control ONLY:
1Press STEP once during playback.
A still picture appears on the TV screen.
2Press STEP repeatedly to advance the
picture frame by frame.
•Each time you press the button, the picture advances
frame by frame.
To resume normal play
Press 3/8.
7 Slow Motion Playback
You can enjoy slow motion playback while playing a DVD.
From the remote control ONLY:
Press SLOW repeatedly during playback or pause.
•Each time you press the button, slow motion speed
changes as follows:
7 Zoom
You can zoom in on the picture while playing back a DVD.
From the remote control ONLY:
1Press ZOOM to zoom in.
•Each time you press the button, the picture is
enlarged as follows:
2Press 3/2/5/∞ to move the
enlarged portion you want to
watch.
To cancel the ZOOM
Press ZOOM repeatedly until the normal size picture is
resumed.
8 PAUSE
38 38 38 38 38 38
2x Zoom 4x Zoom
Canceled
STEP
STEP
TUNER PRESET
SLOW
SLOW   /
PLAY(Normal play)
1
2SLOW   /1
4
ZOOM
ENTER
ZOOM
24
2ENTER
ENTER
EN27-36TH-A30[J]12.pm602.5.22, 7:26 PM 36
 
						

							37
1:Disc type
DVDVCD SVCD CDMP3
2:Current track and total number of the tracks on
the disc
•Ex.: 1st track is playing out of 35 tracks recorded.
3:Sound mode
•Ex.: Stereo sound (Left channel and Right channel).
4:Play Back Control (PBC) indicator
•Ex.: PBC is on. (When PBC is turned off, will
appear.)
5:Repeat mode indicator
•Ex.: When repeat mode is turned off. See page 39 for more
details.
6:Elapsed playing time or remaining time
You can change the play time indication  by pressing
REMAIN. See below.
7:Sound indication
•Indicates sound input level. (Appears only during playback
VCD.)
Showing the On-Screen Bar
You can show the following information on the TV screen while a
disc is loaded.
From the remote control ONLY:
Press DISPLAY.
•Each time you press the button, the following on-screen
bar appears in sequence.
VCD/CD Playback
*Appears only when a VCD is loaded.
**Appears only when a VCD is played back.*
DISPLAY
Checking the Remaining Time
While playing back a VCD or CD, you can check the remaining
time.
From the remote control ONLY:
Press REMAIN.
The on-screen bar appears on the TV screen for a while.
•Each time you press the button, the play time indication
changes as follows:
REMAIN TIME:TRACK
: Select this to show the remaining time of the current track.
DISC TIME
: Select this to show the total elapsed playing time of the disc.
REMAIN TIME:DISC
: Select this to show the total remaining time of the disc.
TRACK TIME
: Select this to show the elapsed playing time of the current
track.REMAIN
REMAIN TIME:TRACK
REMAIN TIME:DISCTRACK TIME
DISC TIME
1¢
¡ DISPLAY
CLEAR
DISPLAY
B.SEARCH DOWN
REWUP
FF
F.SEARCH
RETURN STEP
TV/VIDEO
TV VOLUME
TV CHANNEL
SUBTITLE
TOP MENUTV STANDBY/ON
AUDIO
VCR
VCR 
CONTROL
TUNER PRESET
ENTER
VOLUME
MENU
AUDIO/
FM MODE
VCR CHANNEL
TUNING
DVD FM/AM AUX
MUTING
REMAIN
PROGRAM
D.R.C ZOOMSETUP
PROGRESSIVE
DSP MODE
SLEEP
TEST PRO LOGICSETTINGSOUND
CLEAR REPEATANGLESLOW
SEARCH A-B REPEAT
123
456
789
0Number
buttons
REMAIN RETURN3/8
4
SEARCH MENU
00:121/35
12 3 645
On-screen bar goes off.7
ENTER
•SVCD can be operated by using the VCD operation
procedure.
•For basic disc operations such as inserting a disc, starting
playback, and moving to another tracks, see “Basic VCD/
CD Operations” on pages 14, 15, and “Basic Disc
Operations” on page 28.
**
EN37-42TH-A30[J]12.pm602.5.22, 7:26 PM 37