JVC Th A10 Instructions

19
When a decode mode which differs from the type of
disc being played is selected
Insert a DVD disc in the center unit to display the type of audio
being played in the Decode mode indicator in the display window.
Audio cannot be played if a decode mode which differs from the
displayed mode is selected.
The selected decode mode flashes to indicate that the selected
decode mode does not allow audio playback.
Example: When DTS is selected as the decode mode for Dolby
digital audio.
Adjusting the Input...

20
The lamp display indicates the type of disc (DVD or CD) currently
playing as follows.
With Dolby digital 5.1 ch or DTS digital 5.1 ch surround
With Dolby digital (Lt/Rt *)
With stereo sound (eg Audio CD)
* Lt/Rt refers to the downmix output when connected to a device
that uses Dolby Pro Logic.
Using the Sleep Timer
Using the Sleep Timer, you can fall asleep to music and know the
system will turn off by itself rather than play all night.
From the remote controls:
Press SLEEP repeatedly.
The shut-off...

21
THEATER:Gives the feeling of a large theater.
LIVE CLUB:Gives the feeling of a live music club
with a low ceiling.
DANCE CLUB:Gives a throbbing bass beat.
HALL:Gives clear vocal and the feeling of a concert
hall.
PAVILION:Give the spacious feeling of a pavilion with a
high ceiling.
Notes:
¥ The DSP modes have no effect on monaural sources.
¥ The DOLBY DIGITAL indicator lights up when the signals
encoded with Dolby Digital come into the system.
¥ The PRO LOGIC indicator lights up when the signals...

22
 and represent disc types.
To play a disc
On the front panel
1.Switch the TV on and display video from this
system.
Set the TV input to video 1 (or video 2 or 3).
2.Insert the disc.
1Press 0*on the center unit to open the disc tray.
Change the playback source to DVD.
2Place the disc in the tray.
3Press 0 to close the disc tray.
Playback begins immediately a DVD auto-playback disc is
inserted.
3.Play the disc.
From the remote controls:
Press DVD.
Change the playback source to DVD. The remote control...

23
On-screen guide icons ÑÑÑÑÑÑÑÑÑÑÑÑ
During DVD playback, you may see icons displayed over the
picture. These have the following meanings.
Displayed at the beginning of a scene recorded from
multiple angles (see page 30).
Displayed at the beginning of a scene recorded with
multiple audio languages (see page 32).
Displayed at the beginning of a scene recorded with
multiple subtitle languages (see page 29).
A setting is possible to suppress display of these icons. The setting is
entered in the on-screen...

24
On the front panel:
Press ¢ or 4.
Press 4 to locate the beginning of the current chapter, title, or
track, and press ¢ to locate the beginning of the next chapter, title,
or track.
Note:
¥ When you play a Video CD disc with PBC function or a DVD
disc, the unit may locate different place, but it will generally
locate the beginning of the title or chapter or track.
Resuming playback
The unit stores the position on a disc where
you want to interrupt playback at, and
resumes playback from that position...

25
Selecting the location to view from the
video CD menu
When playing back Video CDs recorded with
PBC (playback control), a list of the recorded
contents may appear on the TV screen as a menu. The location to
view may be conveniently called up from this menu screen.
7When the menu appears on the TV screen during playback with
PBC.
Primary remote control only:
1.Use the number buttons (1~10, +10) to select the
desired number of the item.
To select 3 on menu:
Press 3.
To select 11 on menu :
Press +10 =...

26
To play from the beginning of a title,
chapter, or track
The beginning of previous or later chapters
or tracks may be skipped.
7For DVD: During playback
For Audio CD: Any time
For Video CD: During playback without PBC function
Common:
1.Press ¢ or 4.
¥ Press ¢ the required number of times to move to a later
chapter or track.
¥ Press 4 the required number of times to return to the
previous chapter or track.
¥ Press 4 once to return to the beginning of the chapter or
track currently playing.
Notes:
¥...

27
1.Press DVD ON SCREEN.
The on-screen display appears on the TV screen.
2.Use CURSOR 5/° to move the pointer to [TIME
SEARCH], then press ENTER.
The color of [TIME SEARCH] changes and ÒGO TO:Ó
appears in the message area.
(for DVD) (for Audio CD or Video CD)
3.Use the number buttons (0~9) to enter the time.
The specified time appears in the message area.
Example (for DVD):
To playback from 2(H):34(M):00(S)
You do not have to press
Ò0Ó to enter the railing
zeros (for the last two digits
in the example...

28
3.Press ENTER.
The unit starts playback from the selected title, chapter or track.
To return to the regular display:
Press DIGEST.
Note:
¥ With some discs, depending on the contents, it may take some
time until all the scenes appear on the screen.
To advance the picture one frame at a time
Advancing a paused still picture one frame at a time.
7During playback
From primary remote control only:
1.Press PAUSE at the location at which the picture is
to be advanced.
The picture is paused.
2.Press PAUSE....